The DOI matches its Crossref record; 98 of the 98 references it cites were found in a registry or an index.
How to Conduct Prospective Life Cycle Assessment for Emerging Technologies? A Systematic Review and Methodological Guidance
Open accessAbstract
Emerging technologies are expected to contribute to environmental sustainable development. However, throughout the development of novel technologies, it is unknown whether emerging technologies can lead to reduced environmental impacts compared to a potentially displaced mature technology. Additionally, process steps suspected to be environmental hotspots can be improved by process engineers early in the development of the emerging technology. In order to determine the environmental impacts of emerging technologies at an early stage of development, prospective life cycle assessment (LCA) should be performed. However, consistency in prospective LCA methodology is lacking. Therefore, this article develops a framework for a prospective LCA in order to overcome the methodological inconsistencies regarding prospective LCAs. The methodological framework was developed using literature on prospective LCAs of emerging technologies, and therefore, a literature review on prospective LCAs was conducted. We found 44 case studies, four review papers, and 17 papers on methodological guidance. Three main challenges for conducting prospective LCAs are identified: Comparability, data, and uncertainty challenges. The issues in defining the aim, functionality, and system boundaries of the prospective LCAs, as well as problems with specifying LCIA methodologies, comprise the comparability challenge. Data availability, quality, and scaling are issues within the data challenge. Finally, uncertainty exists as an overarching challenge when applying a prospective LCA. These three challenges are especially crucial for the prospective assessment of emerging technologies. However, this review also shows that within the methodological papers and case studies, several approaches exist to tackle these challenges. These approaches were systematically summarized within a framework to give guidance on how to overcome the issues when conducting prospective LCAs of emerging technologies. Accordingly, this framework is useful for LCA practitioners who are analyzing early-stage technologies. Nevertheless, further research is needed to develop appropriate scale-up schemes and to include uncertainty analyses for a more in-depth interpretation of results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The ecoinvent database version 3 (part I): overview and methodology
Wernet, G., Bauer, C., Steubing, B., Reinhard, J., Moreno-Ruiz, E., & Weidema, B. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1087-8 · Cited by 5,564
Emerging approaches, challenges and opportunities in life cycle assessment
Hellweg, S., & Milà i Canals, L. (2014) · Science · doi:10.1126/science.1248361 · Cited by 1,416
The ecoinvent Database: Overview and Methodological Framework (7 pp)
Frischknecht, R., Jungbluth, N., Althaus, H.-J., Doka, G., Dones, R., Heck, T., Hellweg, S., Hischier, R., Nemecek, T., Rebitzer, G., et al. (2005) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2004.10.181.1 · Cited by 1,114
Data quality management for life cycle inventories—an example of using data quality indicators
Weidema, B. P., & Wesnæs, M. S. (1996) · Journal of Cleaner Production · doi:10.1016/s0959-6526(96)00043-1 · Cited by 1,056
System Boundary Selection in Life-Cycle Inventories Using Hybrid Approaches
Suh, S., Lenzen, M., Treloar, G. J., Hondo, H., Horvath, A., Huppes, G., Jolliet, O., Klann, U., Krewitt, W., Moriguchi, Y., et al. (2004) · Environmental Science & Technology · doi:10.1021/es0263745 · Cited by 1,025
What is an emerging technology?
Rotolo, D., Hicks, D., & Martin, B. R. (2015) · Research Policy · doi:10.1016/j.respol.2015.06.006 · Cited by 975
Reap, J., Roman, F., Duncan, S., & Bras, B. (2008) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-008-0008-x · Cited by 934
Piccinno, F., Hischier, R., Seeger, S., & Som, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.164 · Cited by 670
A review of learning rates for electricity supply technologies
Rubin, E. S., Azevedo, I. M. L., Jaramillo, P., & Yeh, S. (2015) · Energy Policy · doi:10.1016/j.enpol.2015.06.011 · Cited by 606
Environmental Assessment of Emerging Technologies: Recommendations for Prospective LCA
Arvidsson, R., Tillman, A., Sandén, B. A., Janssen, M., Nordelöf, A., Kushnir, D., & Molander, S. (2018) · Journal of Industrial Ecology · doi:10.1111/jiec.12690 · Cited by 539
Sustainability of insect use for feed and food: Life Cycle Assessment perspective
Smetana, S., Palanisamy, M., Mathys, A., & Heinz, V. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.148 · Cited by 437
Life Cycle Assessment: a review of the methodology and its application to sustainability
Curran, M. A. (2013) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2013.02.002 · Cited by 414
Empirically based uncertainty factors for the pedigree matrix in ecoinvent
Ciroth, A., Muller, S., Weidema, B., & Lesage, P. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-013-0670-5 · Cited by 400
Ex-ante LCA of Emerging Technologies
Cucurachi, S., van der Giesen, C., & Guinée, J. (2018) · Procedia CIRP · doi:10.1016/j.procir.2017.11.005 · Cited by 354
Huijbregts, M. A. J., Gilijamse, W., Ragas, A. M. J., & Reijnders, L. (2003) · Environmental Science & Technology · doi:10.1021/es020971+ · Cited by 353
Life cycle assessment of emerging technologies: A review
Moni, S. M., Mahmud, R., High, K., & Carbajales‐Dale, M. (2020) · Journal of Industrial Ecology · doi:10.1111/jiec.12965 · Cited by 344
Mendoza Beltran, A., Cox, B., Mutel, C., van Vuuren, D. P., Font Vivanco, D., Deetman, S., Edelenbosch, O. Y., Guinée, J., & Tukker, A. (2020) · Journal of Industrial Ecology · doi:10.1111/jiec.12825 · Cited by 301
Hetherington, A. C., Borrion, A. L., Griffiths, O. G., & McManus, M. C. (2014) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-013-0627-8 · Cited by 271
Prospective Environmental Life Cycle Assessment of Nanosilver T-Shirts
Walser, T., Demou, E., Lang, D. J., & Hellweg, S. (2011) · Environmental Science & Technology · doi:10.1021/es2001248 · Cited by 269
Arvidsson, R., Nguyen, D., & Svanström, M. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b00888 · Cited by 241
Bergerson, J. A., Brandt, A., Cresko, J., Carbajales‐Dale, M., MacLean, H. L., Matthews, H. S., McCoy, S., McManus, M., Miller, S. A., Morrow, W. R., et al. (2020) · Journal of Industrial Ecology · doi:10.1111/jiec.12954 · Cited by 218
Prospective Life Cycle Assessment of Graphene Production by Ultrasonication and Chemical Reduction
Arvidsson, R., Kushnir, D., Sandén, B. A., & Molander, S. (2014) · Environmental Science & Technology · doi:10.1021/es405338k · Cited by 211
Life cycle sustainability assessment
Zamagni, A. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0389-8 · Cited by 208
Wind Power Electricity: The Bigger the Turbine, The Greener the Electricity?
Caduff, M., Huijbregts, M. A. J., Althaus, H.-J., Koehler, A., & Hellweg, S. (2012) · Environmental Science & Technology · doi:10.1021/es204108n · Cited by 201
Gavankar, S., Suh, S., & Keller, A. A. (2015) · Journal of Industrial Ecology · doi:10.1111/jiec.12175 · Cited by 198
Van der Voet, E., Van Oers, L., Verboon, M., & Kuipers, K. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12722 · Cited by 198
Thomassen, G., Van Dael, M., Van Passel, S., & You, F. (2019) · Green Chemistry · doi:10.1039/c9gc02223f · Cited by 197
The application of the pedigree approach to the distributions foreseen in ecoinvent v3
Muller, S., Lesage, P., Ciroth, A., Mutel, C., Weidema, B. P., & Samson, R. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-014-0759-5 · Cited by 197
Piccinno, F., Hischier, R., Seeger, S., & Som, C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.226 · Cited by 196
The Future of Ex-Ante LCA? Lessons Learned and Practical Recommendations
Buyle, M., Audenaert, A., Billen, P., Boonen, K., & Passel, S. V. (2019) · Sustainability · doi:10.3390/su11195456 · Cited by 195
Framework for scenario development in LCA
Pesonen, H. L., Ekvall, T., Fleischer, G., Huppes, G., Jahn, C., Klos, Z. S., Rebitzer, G., Sonnemann, G. W., Tintinelli, A., Weidema, B. P., et al. (2000) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978555 · Cited by 184
Positive and negative feedback in consequential life-cycle assessment
Sandén, B. A., & Karlström, M. (2007) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.03.005 · Cited by 183
Grand Challenges for Life-Cycle Assessment of Biofuels
McKone, T. E., Nazaroff, W. W., Berck, P., Auffhammer, M., Lipman, T., Torn, M. S., Masanet, E., Lobscheid, A., Santero, N., Mishra, U., et al. (2011) · Environmental Science & Technology · doi:10.1021/es103579c · Cited by 176
Anticipatory life-cycle assessment for responsible research and innovation
Wender, B. A., Foley, R. W., Hottle, T. A., Sadowski, J., Prado, V., Eisenberg, D. A., Laurin, L., & Seager, T. P. (2014) · Journal of Responsible Innovation · doi:10.1080/23299460.2014.920121 · Cited by 174
Uncertain Environmental Footprint of Current and Future Battery Electric Vehicles
Cox, B., Mutel, C. L., Bauer, C., Mendoza Beltran, A., & van Vuuren, D. P. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b00261 · Cited by 173 · cited 1×
“The most used approach in the studies that includes parameter uncertainty is the Monte Carlo method [26,35,37,61,89,94,113].”
MethodVillares, M., Işıldar, A., van der Giesen, C., & Guinée, J. B. (2017) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-017-1270-6 · Cited by 170
Gibon, T., Wood, R. A., Arvesen, A., Bergesen, J. D., Suh, S., & Hertwich, E. G. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01558 · Cited by 162
Illustrating Anticipatory Life Cycle Assessment for Emerging Photovoltaic Technologies
Wender, B. A., Foley, R. W., Prado, V., Ravikumar, D., Eisenberg, D. A., Hottle, T. A., Sadowski, J., Flanagan, W. P., Fisher, A., Laurin, L., et al. (2014) · Environmental Science & Technology · doi:10.1021/es5016923 · Cited by 162
Zumsteg, J. M., Cooper, J. S., & Noon, M. S. (2012) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2012.00476.x · Cited by 159
A review of methodological issues affecting LCA of novel food products
Hospido, A., Davis, J., Berlin, J., & Sonesson, U. (2009) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-009-0130-4 · Cited by 153
Gerber, L. N., Gassner, M., & Marechal, F. M. A. (2010) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2010.11.012 · Cited by 136
Life Cycle Assessment and resource analysis of all-solid-state batteries
Troy, S., Schreiber, A., Reppert, T., Gehrke, H.-G., Finsterbusch, M., Uhlenbruck, S., & Stenzel, P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.064 · Cited by 133
Rapid Life-Cycle Impact Screening Using Artificial Neural Networks
Song, R., Keller, A. A., & Suh, S. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b02862 · Cited by 133
Lacirignola, M., Blanc, P., Girard, R., Pérez‐López, P., & Blanc, I. (2016) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2016.10.066 · Cited by 126
Gear, M., Sadhukhan, J., Thorpe, R. B., Clift, R., SEVILLE, J. P. K., & Keast, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.015 · Cited by 126
Caduff, M., Huijbregts, M. A. J., Koehler, A., Althaus, H., & Hellweg, S. (2014) · Journal of Industrial Ecology · doi:10.1111/jiec.12122 · Cited by 121
Social sustainability assessments in the biobased economy: Towards a systemic approach
Rafiaani, P., Kuppens, T. E., Dael, M. V., Azadi, H., Lebailly, P., & Passel, S. V. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.06.118 · Cited by 120
Spielmann, M., Scholz, R. W., Tietje, O., & de Haan, P. (2004) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2004.10.188 · Cited by 119
Daylan, B., & Ciliz, N. K. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.11.059 · Cited by 117
Fang, L. L., Valverde‐Pérez, B., Damgaard, A., Plósz, B. G., & Rygaard, M. (2015) · Water Research · doi:10.1016/j.watres.2015.10.016 · Cited by 114
García-Herrero, I., Cuéllar-Franca, R. M., Enríquez-Gutiérrez, V. M., Álvarez-Guerra, M., Irabien, Á., & Azapagic, A. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01515 · Cited by 113
Thonemann, N., & Schulte, A. (2019) · Environmental Science & Technology · doi:10.1021/acs.est.9b02944 · Cited by 112
Self-citationLife cycle assessment of 3D printing geo‐polymer concrete: An ex‐ante study
Yao, Y., Hu, M., Maio, F. D., et al. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12930 · Cited by 108
The environmental sustainability of microalgae as feed for aquaculture: a life cycle perspective
Taelman, S. E., De Meester, S., Roef, L., Michiels, M., & Dewulf, J. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.044 · Cited by 107
Framework for Analyzing Transformative Technologies in Life Cycle Assessment
Miller, S. A., & Keoleian, G. A. (2015) · Environmental Science & Technology · doi:10.1021/es505217a · Cited by 104
Applying an ex-ante life cycle perspective to metal recovery from e-waste using bioleaching
Villares, M., Işıldar, A., Beltrán, A. M., et al. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.066 · Cited by 93
Corona, A., Ambye‐Jensen, M., Vega, G. C., Hauschild, M. Z., & Birkved, M. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.03.357 · Cited by 93
Falcone, P., & Imbert, E. (2018) · Sustainability · doi:10.3390/su10041031 · Cited by 92
Tecchio, P., Freni, P., Benedetti, B. D., & Fenouillot, F. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.090 · Cited by 91
Approximate Life‐Cycle Assessment of Product Concepts Using Learning Systems
Sousa, I., Wallace, D. R., & Eisenhard, J. L. (2000) · Journal of Industrial Ecology · doi:10.1162/10881980052541954 · Cited by 82
Caduff, M., Huijbregts, M. A. J., Althaus, H.-J., & Hendriks, A. J. (2010) · Environmental Science & Technology · doi:10.1021/es103095k · Cited by 81
Transitioning towards the bio-economy: Assessing the social dimension through a stakeholder lens
Falcone, P. M., González García, S., Imbert, E., Lijó, L., Moreira, M. T., Tani, A., Tartiu, V. E., & Morone, P. (2019) · Corporate Social Responsibility and Environmental Management · doi:10.1002/csr.1791 · Cited by 80
Bartolozzi, I., Daddi, T., Punta, C., Fiorati, A., & Iraldo, F. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12959 · Cited by 77
Roes, A. L., & Patel, M. K. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.05.010 · Cited by 70
Environmental screening of potential biomass for green biorefinery conversion
Corona, A., Parajuli, R., Ambye‐Jensen, M., Hauschild, M. Z., & Birkved, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.316 · Cited by 70
Simon, B., Bachtin, K., Kılıç, A., Amor, B., & Weil, M. (2016) · Integrated Environmental Assessment and Management · doi:10.1002/ieam.1788 · Cited by 68
Life cycle assessment of emerging technologies: The case of milk ultra-high pressure homogenisation
Valsasina, L., Pizzol, M., Smetana, S. M., Georget, E., Mathys, A., & Heinz, V. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.059 · Cited by 66
Sfez, S., Van Den Hende, S., Taelman, S. E., De Meester, S., & Dewulf, J. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.04.088 · Cited by 65
Pallas, G., Vijver, M. G., Peijnenburg, W. J. G. M., et al. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12855 · Cited by 65
Cooper, D., & Gutowski, T. G. (2018) · Journal of Industrial Ecology · doi:10.1111/jiec.12748 · Cited by 62
Jones, C., Gilbert, P., Raugei, M., Mander, S. L., & Leccisi, E. (2016) · Energy Policy · doi:10.1016/j.enpol.2016.08.030 · Cited by 61
LiSET: A Framework for Early‐Stage Life Cycle Screening of Emerging Technologies
Hung, C. R., Ellingsen, L. A., & Majeau‐Bettez, G. (2018) · Journal of Industrial Ecology · doi:10.1111/jiec.12807 · Cited by 60
Joyce, P. J., Hertel, T., Goronovski, A., Tkaczyk, A. H., Pontikes, Y., & Björklund, A. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.07.006 · Cited by 58
Arvidsson, R., & Molander, S. (2016) · Journal of Industrial Ecology · doi:10.1111/jiec.12526 · Cited by 56
Life cycle considerations of nano-enabled agrochemicals: are today's tools up to the task?
Pourzahedi, L., Pandorf, M., Ravikumar, D., Zimmerman, J. B., Seager, T. P., Theis, T. L., Westerhoff, P. K., Gilbertson, L. M., & Lowry, G. V. (2018) · Environmental Science Nano · doi:10.1039/c7en01166k · Cited by 56
Manda, B. M. K., Worrell, E., & Patel, M. K. (2015) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2015.07.010 · Cited by 52
Gavankar, S., Anderson, S. E., & Keller, A. A. (2014) · Journal of Industrial Ecology · doi:10.1111/jiec.12183 · Cited by 51
Sharp, B. E., & Miller, S. A. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b03239 · Cited by 51
An environmental study on starch aerogel for drug delivery applications: effect of plant scale-up
Marco, I. D., Iannone, R., Miranda, S., & Riemma, S. (2017) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-017-1351-6 · Cited by 51
Ravikumar, D., Seager, T. P., Cucurachi, S., Prado, V., & Mutel, C. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b04517 · Cited by 51
Liptow, C., Tillman, A., & Janssen, M. (2015) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-015-0855-1 · Cited by 50
A framework for technological learning in the supply chain: A case study on CdTe photovoltaics
Bergesen, J. D., & Suh, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.013 · Cited by 50
Hischier, R., Salieri, B., & Pini, M. (2017) · NanoImpact · doi:10.1016/j.impact.2017.05.001 · Cited by 48
Life cycle assessment of nanoadsorbents at early stage technological development
Kazemi, A., Bahramifar, N., Heydari, A., & Olsen, S. I. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.245 · Cited by 47
Learning from experts: fostering extended thinking in the early phases of the design process
Haupt, G. (2014) · International Journal of Technology and Design Education · doi:10.1007/s10798-014-9295-7 · Cited by 44
Tan, L., Mandley, S., Peijnenburg, W. J. G. M., Waaijers, S. L., Giesen, D., Legradi, J., & Shen, L. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.243 · Cited by 44
Yao, Y., & Masanet, E. R. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.125 · Cited by 42
Gargalo, C. L., Cheali, P., Posada, J. A., Carvalho, A. I. C. D. S. G., Gernaey, K. V., & Sin, G. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.08.156 · Cited by 40
Lu, J., Kumagai, S., Ohno, H., Kameda, T., Saito, Y., Yoshioka, T., & Fukushima, Y. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.104500 · Cited by 34
Prospective time-resolved LCA of fully electric supercap vehicles in Germany
Zimmermann, B., Dura, H., Baumann, M., & Weil, M. (2015) · Integrated Environmental Assessment and Management · doi:10.1002/ieam.1646 · Cited by 32
Janssen, M., Tillman, A., Cannella, D., & Jørgensen, H. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.09.044 · Cited by 32
Sampaio, A. P. C., FILHO, M. D. S. M. D. S., Castro, A. L. A., & de Figueirêdo, M. C. B. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1179-5 · Cited by 31
Muñoz, I., Portillo, F., Rosiek, S., Batlles, F. J., Martínez‐del‐Río, J., Acasuso, I., Piergrossi, V., Sanctis, M. D., Chimienti, S., & Iaconi, C. D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.074 · Cited by 31
Prospective Life Cycle Assessment of a Structural Battery
Zackrisson, M., Jönsson, C., Johannisson, W., Fransson, K., Posner, S., Zenkert, D., & Lindbergh, G. (2019) · Sustainability · doi:10.3390/su11205679 · Cited by 31
Anticipatory Life Cycle Assessment of sol-gel derived anti-reflective coating for greenhouse glass
Tsoy, N., Prado, V., Wypkema, A., Quist, J., & Mourad, M. C. D. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.246 · Cited by 30
Methodological advancements in Life Cycle Process Design: A preliminary outlook
Fazeni‐Fraisl, K., Lindorfer, J., & Prammer, H. K. (2014) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2014.08.011 · Cited by 28
Marini, C., & Blanc, I. (2014) · Lecture notes in computer science · doi:10.1007/978-3-319-09150-1_51 · Cited by 27
LCA of Emerging Technologies: A Methodological Framework
Sandén, B. A., Jonasson, K., Karlström, M., et al. (2005) · Chalmers Publication Library (Chalmers University of Technology) · Cited by 10
Cited by
Sacchi, R., Terlouw, T., Siala, K., Dirnaichner, A., Bauer, C., Cox, B., Mutel, C., Daioglou, V., & Luderer, G. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112311 · Cited by 570
Arias, A., Nika, C.-E., Vasilaki, V., Feijoo, G., Moreira, M. T., & Katsou, E. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114427 · Cited by 62
Furberg, A., Arvidsson, R., & Molander, S. (2022) · Journal of Industrial Ecology · doi:10.1111/jiec.13218 · Cited by 60
A readiness level framework for sustainable circular bioeconomy
Holden, N. M. (2022) · EFB Bioeconomy Journal · doi:10.1016/j.bioeco.2022.100031 · Cited by 39
Prospective life cycle assessment as a tool for environmentally responsible innovation
Yousefzadeh, Z., & Lloyd, S. M. (2021) · 2021 IEEE International Symposium on Technology and Society (ISTAS) · doi:10.1109/istas52410.2021.9629146 · Cited by 7
Metadata
- Authors
- Thonemann, N., Schulte, A., & Maga, D.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2020-02-07
- Volume
- 12
- Issue
- 3
- Pages
- 1192
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W3005167858
- Cited by
- 354
- References
- 98
- FWCI
- 4.65
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.