CoChat

Mechanical Behavior of a Composite Lightweight Slab, Consisting of a Laminated Wooden Joist and Ecological Mortar

Open access
Muñoz-Ruiperez, Carmelo, Fiol Oliván, Francisco, Calderón Carpintero, Verónica, Santamaría-Vicario, Isabel, Rodríguez Sáiz, Ángel · 2020 · Materials

The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.

Abstract

The investigation reported in this paper is an evaluation of the mechanical behavior of full-scale ecological mortar slabs manufactured with a mixture of expanded clay and recycled concrete aggregates. The composite mortars form a compressive layer over laminated wooden joists to form a single construction unit. To do so, full-scale flexural tests are conducted of the composite laminated wood-ecological mortar slabs with different types of mortar designs: reference mortar (MR), lightweight mortar dosed with recycled concrete aggregates (MLC), and lightweight mortar dosed with recycled mixed aggregates (MLM). The test results showed that the mortar forming the compression layer and the laminated wooden joists worked in unison and withstood a higher maximum failure load under flexion than the failure load of the wooden joists in isolation. Moreover, the laboratory test results were compared with the simulated values of the theoretical model, generated in accordance with the technical specifications for structural calculations contained in the Spanish building code, and with the results calculated by a computer software package. From the analysis of the results of the calculation methods and the full-scale laboratory test results, it was concluded that the safety margin yielded by the calculations validated the use of those methods on this type of composite slab. In this way, a strong mixed wood–mortar slab was designed, contributing little dead-load to the building structure and its manufacture with recycled aggregate, also contributes to the circular economy of construction materials.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ma13112575

Cites

34 of 34 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Particle size distribution of raw materials.
Figure 1 Particle size distribution of raw materials.CC BY · PubMed Central
Figure 2 Wooden slab framework and connectors (left to right: joist, connectors, and board).
Figure 2 Wooden slab framework and connectors (left to right: joist, connectors, and board).CC BY · PubMed Central
Figure 3 Section of the constructive component.
Figure 3 Section of the constructive component.CC BY · PubMed Central
Figure 4 Placing the connectors.
Figure 4 Placing the connectors.CC BY · PubMed Central
Figure 5 Final appearance of the mesh and formwork of the constructive unit.
Figure 5 Final appearance of the mesh and formwork of the constructive unit.CC BY · PubMed Central
Figure 6 Manufacture mortar (left), placing of the mortar (center) and mortar compactation (right).
Figure 6 Manufacture mortar (left), placing of the mortar (center) and mortar compactation (right).CC BY · PubMed Central
Figure 7 1000 kN hydraulic press (left). Detail of actuator (center) and of transducer (right).
Figure 7 1000 kN hydraulic press (left). Detail of actuator (center) and of transducer (right).CC BY · PubMed Central
Figure 8 Diagram of the flexural failure test.
Figure 8 Diagram of the flexural failure test.CC BY · PubMed Central
Figure 9 Flexural failure test set up.
Figure 9 Flexural failure test set up.CC BY · PubMed Central
Figure 10 Diagram of wooden joist-compression layer connections.
Figure 10 Diagram of wooden joist-compression layer connections.CC BY · PubMed Central
Figure 11 Stress state of an isolated joist.
Figure 11 Stress state of an isolated joist.CC BY · PubMed Central
Figure 12 Stress state of the composite wood–mortar section.
Figure 12 Stress state of the composite wood–mortar section.CC BY · PubMed Central
Figure 13 Discretization of the test model.
Figure 13 Discretization of the test model.CC BY · PubMed Central
Figure 14 Full-scale test results.
Figure 14 Full-scale test results.CC BY · PubMed Central
Figure 15 Final appearance of the specimens after the flexural test.
Figure 15 Final appearance of the specimens after the flexural test.CC BY · PubMed Central
Figure 16 Deformation under the maximum load (mm).
Figure 16 Deformation under the maximum load (mm).CC BY · PubMed Central
Figure 17 Moment on the x-axis (MPa).
Figure 17 Moment on the x-axis (MPa).CC BY · PubMed Central
Figure 18 Full-scale test results vs. analytical results.
Figure 18 Full-scale test results vs. analytical results.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 34 references

Research works printed but not linked: 5

  1. European Union. Opinion of the European Committee of the Regions (2020, April 05). Towards an Integrated Approach to Cultural Heritage for Europe. Official Journal of the European Union 195/04. Available online: https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:C:2015:195:FULL&from=EN.
  2. Alonso, 2015, Integrated urban regeneration and the declaration of Toledo, Inf. Constr, 67-Extra 1, 1
  3. Cervero, 2015, Urban Remodeling, Transformation and Renovation. Three ways of intervening on twentieth century Social Housing, Inf. Constr, 67-Extra 1, 1
  4. Croci, G. (1998). The Conservation and Structural Restoration of Architectural Heritage (Vol. 1), WIT Press.
  5. Natterer, J., Hamm, J., and Favre, P. (1996, January 28–31). Composite wood-concrete floors for multi-story buildings. Proceedings of the International Wood Engineering Conference, New Orleans, Louisiana, USA.

Metadata

Authors
Muñoz-Ruiperez, C., Fiol Oliván, F., Calderón Carpintero, V., Santamaría-Vicario, I., & Rodríguez Sáiz, Á.
Affiliations
Department of Construction, University of Burgos, Calle Villadiego s/n, 09001 Burgos, Spain
Venue
Materials
Publisher
MDPI AG
Published
2020-06-05
Volume
13
Issue
11
Pages
2575
ISSN
1996-1944 (ISSN-L)
OpenAlex
W3033745257
Cited by
2
References
34
Citations by year
2021: 2
FWCI
0.26
Type
journal article
Language
en
Open access
Locations
  • Materials (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Engineering › Building and Construction › Recycled Aggregate Concrete Performance
  • Physical Sciences › Engineering › Civil and Structural Engineering › Masonry and Concrete Structural Analysis
  • Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
Keywords
composite slabs, recycled concrete aggregate, expanded clay aggregate, lightweight mortar, flexural behavior, structural calculation methods, safety margin, circular economy, building materials

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Mechanical Behavior of a Composite Lightweight Slab, Consisting of a Laminated Wooden Joist and Ecological Mortar. https://app.cochat.ai/papers/10.3390/ma13112575
The paper
Muñoz-Ruiperez, C., Fiol Oliván, F., Calderón Carpintero, V., Santamaría-Vicario, I., & Rodríguez Sáiz, Á. (2020). Mechanical Behavior of a Composite Lightweight Slab, Consisting of a Laminated Wooden Joist and Ecological Mortar. Materials. https://doi.org/10.3390/ma13112575

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.