Digital Twins in the Construction Industry: A Comprehensive Review of Current Implementations, Enabling Technologies, and Future Directions
Open accessThe DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Abstract
This paper presents a comprehensive understanding of current digital twin (DT) implementations in the construction industry, along with providing an overview of technologies enabling the operation of DTs in the industry. To this end, 145 publications were identified using a systematic literature review. The results revealed eight key areas of DT implementation including (i) virtual design, (ii) project planning and management, (iii) asset management and maintenance, (iv) safety management, (v) energy efficiency and sustainability, (vi) quality control and management, (vii) supply chain management and logistics, and (viii) structural health monitoring. The findings demonstrate that DT technology has the capacity to revolutionise the construction industry across these areas, enabling optimised designs, improved collaboration, real-time monitoring, predictive maintenance, enhanced safety practices, energy performance optimisation, quality inspections, efficient supply chain management, and proactive maintenance. This study also identified several challenges that hinder the widespread implementation of DT in construction, including (i) data integration and interoperability, (ii) data accuracy and completeness, (iii) scalability and complexity, (iv) privacy and security, and (v) standards and governance. To address these challenges, this paper recommends prioritising standardised data formats, protocols, and APIs for seamless collaboration, exploring semantic data modelling and ontologies for data integration, implementing validation processes and robust data governance for accuracy and completeness, harnessing high-performance computing and advanced modelling techniques for scalability and complexity, establishing comprehensive data protection and access controls for privacy and security, and developing widely accepted standards and governance frameworks with industry-wide collaboration. By addressing these challenges, the construction industry can unlock the full potential of DT technology, thus enhancing safety, reliability, and efficiency in construction projects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Edge computing: Vision and challenges
Shi, W., Cao, J., Zhang, Q., Li, Y., & Xu, L. (2016) · IEEE Internet of Things Journal · doi:10.1109/jiot.2016.2579198 · Cited by 8,733 · cited 1×
“This approach brings benefits such as reduced latency, improved real-time responsiveness, enhanced data privacy and security, optimised bandwidth usage, improved reliability, and localised decision-making capabilities [109,110].”
BackgroundDigital twin: Enabling technologies, challenges and open research
Fuller, A., Fan, Z., Day, C., & Barlow, C. (2020) · IEEE Access · doi:10.1109/access.2020.2998358 · Cited by 2,965 · cited 9×
“DT technology combines multiple disciplines to achieve advanced monitoring, simulation, diagnosis, and prognosis [27,97,98].”
BackgroundMethodInfluentialEnabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579 · cited 8×
“Models with varying levels of fidelity may be suitable for different phases of the design process or for addressing different types of design inquiries [2,4,15,27].”
BackgroundMethodInfluentialDigital twin shop-floor: a new shop-floor paradigm towards smart manufacturing
Tao, F., & Zhang, M. (2017) · IEEE Access · doi:10.1109/access.2017.2756069 · Cited by 1,397
Digital Twin Technology Challenges and Applications: A Comprehensive Review
Botín-Sanabria, D. M., Mihaita, A.-S., Peimbert-García, R. E., Ramírez-Moreno, M. A., Ramírez-Mendoza, R. A., & Lozoya-Santos, J. D. J. (2022) · Remote Sensing · doi:10.3390/rs14061335 · Cited by 1,092
Big Data in the construction industry: A review of present status, opportunities, and future trends
Bilal, M., Oyedele, L. O., Qadir, J., Munir, K., Ajayi, S. O., Akinade, O. O., Owolabi, H. A., Alaka, H. A., & Pasha, M. (2016) · Advanced Engineering Informatics · doi:10.1016/j.aei.2016.07.001 · Cited by 929
Rathore, M. M., Shah, S. A., Shukla, D., Bentafat, E., & Bakiras, S. (2021) · IEEE Access · doi:10.1109/access.2021.3060863 · Cited by 616 · cited 2×
“These technologies enable advanced data processing capabilities, facilitating the identification of correlations, trends, and anomalies within a dataset [106,107].”
BackgroundFrom IoT to 5G I-IoT: The Next Generation IoT-Based Intelligent Algorithms and 5G Technologies
Wang, D., Chen, D., Song, B., Guizani, N., Yu, X., & Du, X. (2018) · IEEE Communications Magazine · doi:10.1109/mcom.2018.1701310 · Cited by 306
Blockchain for digital twins: recent advances and future research challenges
Yaqoob, I., Salah, K., Uddin, M., Jayaraman, R., Omar, M., & Imran, M. (2020) · IEEE Network · doi:10.1109/mnet.001.1900661 · Cited by 256 · cited 2×
“Through its decentralised and immutable nature, blockchain ensures the integrity and authenticity of data by securely recording and verifying transactions and data exchanges among stakeholders [111,112].”
BackgroundPregnolato, M., Gunner, S., Voyagaki, E., De Risi, R., Carhart, N., Gavriel, G., Tully, P., Tryfonas, T., Macdonald, J., & Taylor, C. (2022) · Automation in Construction · doi:10.1016/j.autcon.2022.104421 · Cited by 253
A Digital-Twin Evaluation of Net Zero Energy Building for Existing Buildings
Kaewunruen, S., Rungskunroch, P., & Welsh, J. (2018) · Sustainability · doi:10.3390/su11010159 · Cited by 241
Leveraging Digital Twin for Sustainability Assessment of an Educational Building
Tagliabue, L. C., Cecconi, F. R., Maltese, S., Rinaldi, S., Ciribini, A. L. C., & Flammini, A. (2021) · Sustainability · doi:10.3390/su13020480 · Cited by 212 · cited 1×
“Tagliabue et al. [73] introduced a framework that facilitates a dynamic sustainability assessment by integrating DT technology and IoT.”
BackgroundLiterature review of digital twins applications in construction workforce safety
Hou, L., Wu, S., Zhang, G. (., Tan, Y., & Wang, X. (2020) · Applied Sciences · doi:10.3390/app11010339 · Cited by 194
Zhao, J., Feng, H., Chen, Q., & Garcia de Soto, B. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104028 · Cited by 192
Digital twins in infrastructure: definitions, current practices, challenges and strategies
Broo, D. G., & Schooling, J. (2023) · International Journal of Construction Management · doi:10.1080/15623599.2021.1966980 · Cited by 184
Digital Twins in Civil Infrastructure Systems
Callcut, M., Cerceau Agliozzo, J.-P., Varga, L., & McMillan, L. (2021) · Sustainability · doi:10.3390/su132011549 · Cited by 132
Qi, Q., Zhao, D., Liao, T. W., & Tao, F. (2018) · Volume 1: Additive Manufacturing; Bio and Sustainable Manufacturing · doi:10.1115/msec2018-6435 · Cited by 105
Requirements and languages for the semantic representation of manufacturing systems
Negri, E., Fumagalli, L., Garetti, M., & Tanca, L. (2016) · Computers in Industry · doi:10.1016/j.compind.2015.10.009 · Cited by 93 · cited 1×
“Studies also suggested that semantic models and ontologies offer viable approaches to address the challenges related to data integration and interoperability in DT models [120,121].”
BackgroundThe product avatar as a product-instance-centric information management concept
Hribernik, K. A., Rabe, L., Thoben, K. D., & Schumacher, J. (2006) · International Journal of Product Lifecycle Management · doi:10.1504/ijplm.2006.011055 · Cited by 90
Role of Ontologies for CPS Implementation in Manufacturing
Garetti, M., Fumagalli, L., & Negri, E. (2015) · Management and Production Engineering Review · doi:10.1515/mper-2015-0033 · Cited by 64 · cited 1×
“Studies also suggested that semantic models and ontologies offer viable approaches to address the challenges related to data integration and interoperability in DT models [120,121].”
Background
Cited by
Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0
Mon, B. F., Hayajneh, M., Ali, N. A., Ullah, F., Ullah, H., & Alkobaisi, S. (2025) · Computers, Materials & Continua · doi:10.32604/cmc.2025.061411 · Cited by 26
Metadata
- Authors
- Omrany, H., Al-Obaidi, K. M., Husain, A., & Ghaffarianhoseini, A.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2023-07-12
- Volume
- 15
- Issue
- 14
- Pages
- 10908
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W4384201993
- Cited by
- 251
- References
- 20
- FWCI
- 30.06
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.