The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index; 5 of the 20 sources its claims cite were checked for support.
Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition
Open accessAbstract
Load forecasting has significant implications on optimizing the operation of air conditioning systems for industrial mushroom houses and energy saving. This research paper presents a novel approach for short-term load forecasting in mushroom houses, which face challenges in accurately modeling cold and heat loads due to the complex interplay of various factors, including climatic conditions, mushroom growth, and equipment operation. The proposed method combines empirical wavelet transform (EWT), hybrid autoregressive integrated moving average (ARIMA), convolutional neural network (CNN), and bi-directional long short-term memory (BiLSTM) with an attention mechanism (CNN-BiLSTM-Attention) to address these challenges. The first step of this method was to select input features via the Boruta algorithm. Then, the EWT method was used to decompose the load data of mushroom houses into four modal components. Subsequently, the Lempel–Ziv method was introduced to classify the modal components into high-frequency and low-frequency classes. CNN-BiLSTM-Attention and ARIMA prediction models were constructed for these two classes, respectively. Finally, the predictions from both classes were combined and reconstructed to obtain the final load forecasting value. The experimental results show that the Boruta algorithm selects key influential feature factors effectively. Compared to the Spearman and Pearson correlation coefficient methods, the mean absolute error (MAE) of the prediction results is reduced by 14.72% and 3.75%, respectively. Compared to the ensemble empirical mode decomposition (EEMD) method, the EWT method can reduce the decomposition reconstruction error by an order of magnitude of 103, effectively improving the accuracy of the prediction model. The proposed model in this paper exhibits significant advantages in prediction performance compared to the single neural network model, with the MAE, root mean square error (RMSE), and mean absolute percentage error (MAPE) of the prediction results reduced by 31.06%, 26.52%, and 39.27%, respectively.
Overview
CoChat Summary
TL;DR
This paper proposes a short-term heat/cold load forecasting method for factory mushroom houses that combines EWT decomposition, Lempel-Ziv component classification, Boruta feature selection, and separate ARIMA and CNN-BiLSTM-Attention models for low- and high-frequency components. Using data from a Beijing *Hypsizygus marmoreus* factory, the hybrid model reports lower MAE, RMSE, and MAPE than several comparison models.
Key findings
- Boruta feature selection accepted 7 of 9 input features and rejected 2; the resulting model had MAE 0.591 kW, RMSE 1.056 kW, and MAPE 5.68%, with MAE reduced by 16.88%, 14.72%, and 3.75% compared with the control, Spearman, and Pearson methods, respectively, and training time 2 s shorter than Spearman/Pearson.
- EWT decomposition at scale 4 gave the smallest reconstruction error (sum of absolute errors 0.05737 kW in Table 4); EWT reconstruction error fluctuated within ±3.0 × 10⁻⁴ versus ±8 × 10⁻¹ for EEMD, a difference of order 10³.
- The proposed hybrid ARIMA + CNN-BiLSTM-Attention model based on EWT reduced MAE, RMSE, and MAPE by 31.06%, 26.52%, and 39.27%, respectively, compared with CNN-BiLSTM-Attention, and achieved R² = 0.951.
- NSGA-II hyperparameter optimization gave MAE 0.557 kW, RMSE 0.884 kW, and MAPE 5.26%, with MAE 4.46% and 2.28% lower than PSO and GA, respectively; the segmented loss function gave MAE 0.497 kW and MAPE 4.64%.
Methods
- Data were collected from an experimental mushroom house in Tongzhou District, Beijing, producing *Hypsizygus marmoreus*; the house was 14 m × 8 m × 5 m with polyurethane steel plate enclosures. Sensors measured indoor/outdoor temperature and humidity, air conditioner current, fresh air velocity, CO₂ concentration, solar radiation, and wall heat flux, with 1-min sampling from 11 July 2022 to 15 September 2022, totaling 729,300 data.
- Preprocessing used linear interpolation for missing data and mean smoothing for abnormal data, followed by Boruta feature selection and normalization. EWT decomposed the load into four modal components; Lempel-Ziv complexity classified the first three as high-frequency and the fourth as low-frequency. CNN-BiLSTM-Attention predicted the high-frequency component, ARIMA predicted the low-frequency component, and the results were reconstructed.
- The high-frequency model used historical 4-h load data to predict the next 10 min, with input feature dimension (24,7); the dataset was split 7:2:1 for training, validation, and testing. ARIMA parameters were p = 2, d = 1, q = 1. Hyperparameters were optimized with NSGA-II, and a segmented loss function was used; evaluation metrics were RMSE, MAE, MAPE, and R².
Limitations
- The paper states that further improvements should leverage technologies such as online sensors and data cloud platforms to ensure continuous optimization of the model.
- Evident from the text: validation used a single experimental mushroom house, one mushroom species (*Hypsizygus marmoreus*), and one summer period (11 July–15 September 2022) in Beijing; no multi-site, multi-season, or multi-species validation is reported. The paper does not present a formal limitations section.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 1 Not valid · 12 Not checked · 94 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The accuracy of the prediction model can be effectively improved by analyzing the different characteristics of the decomposed load data and establishing the most suitable prediction model based on these characteristics [36,37].”
§ Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition > 1. Introduction
What the sources say
- Partly supportedcites [36] Zhang, 2022, Hybrid Short-term Load Forecasting Method Based on Empirical Wavelet Transform and Bidirectional Long Short-term Memory Neural Networks, J. Mod. Power Syst. Clean Energy sourceExperimental — accuracy not yet measured
Section D, “Comparison of Proposed Method with Others” (page not provided), reports better accuracy for the proposed decomposition-based method than the comparison methods. But “Influence of Number of Sub-layers” says an LSTM predictor is trained for each component; it does not describe selecting the most suitable model according to each component’s characteristics. (LLM, conf=0.85)
- Not checked — no full text of the sourcecites [37] Karijadi, 2022, A hybrid RF-LSTM based on CEEMDAN for improving the accuracy of building energy consumption prediction, Energy Build. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Compared to the ensemble empirical mode decomposition (EEMD) method, the EWT method can reduce the decomposition reconstruction error by an order of magnitude of 10 3 , effectively improving the accuracy of the prediction model.”
§ Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition > Abstract
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The proposed model in this paper exhibits significant advantages in prediction performance compared to the single neural network model, with the MAE, root mean square error (RMSE), and mean absolute percentage error (MAPE) of the prediction results reduced by 31.06%,26.52%, and 39.27%, respectively.”
§ Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition > Abstract
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Compared to the Spearman and Pearson correlation coefficient methods, the mean absolute error (MAE) of the prediction results is reduced by 14.72% and 3.75%, respectively.”
§ Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition > Abstract
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Compared to the Spearman and Pearson correlation coefficient methods, the mean absolute error (MAE) of the prediction results is reduced by 14.72% and 3.75%, respectively.”
§ Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition > Abstract
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
72 more claims
Create a free account to see all 112 claims and to verify the 4 references still open.
- It may state two separate claims as one. 28
- Probably not a substantial claim. 7
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition > 3.4. Comparative Analysis and Research
“selecting the ARIMA model and the CNN-BiLSTM-attention model for high-and low-frequency components, respectively, can effectively improve the prediction accuracy.”
§ Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition > 2.6. Predictive Model Structure
“For the high-frequency part of the load, the input features are filtered using the Boruta method to establish key feature vectors, and then the historical 4-h load data are used to predict the load changes in the next 10 min, and the input features with data dimension (24,7) are constructed and input to the CNN layer; for the low-frequency part of the load, it is directly entered into the ARIMA model.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition > 4. Conclusions
“Compared to using MSE or MAE as the loss function, the MAE of the model's prediction results decreased by 4.05% and 10.77%, respectively.”
§ Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition > 3.3.2. Loss Function Optimization Strategy
“Compared to using MAE and MSE as the loss functions, the error is reduced by 4.05% and 10.77%, respectively, for MAE”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition > 3.4. Comparative Analysis and Research
“selecting the ARIMA model and the CNN-BiLSTM-attention model for high-and low-frequency components, respectively, can effectively improve the prediction accuracy.”
§ Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition > 2.5. Process Design
“For the high-frequency feature components, the dataset in Step 3 was first normalized, and then the CNN-BiLSTM-Attention model was used to predict; the high-frequency feature prediction results were obtained after inverse normalization.For the low-frequency feature components, an ARIMA prediction model was established”
Citations
Cites
Short-Term Residential Load Forecasting Based on LSTM Recurrent Neural Network
Kong, W., Dong, Z. Y., Jia, Y., Hill, D. J., Xu, Y., & Zhang, Y. (2019) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2017.2753802 · Cited by 2,645
Gilles, J. (2013) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2013.2265222 · Cited by 2,210
Convolutional neural networks at constrained time cost
He, K., & Sun, J. (2015) · 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2015.7299173 · Cited by 1,558
Predicting residential energy consumption using CNN-LSTM neural networks
Kim, T.-Y., & Cho, S.-B. (2019) · Energy · doi:10.1016/j.energy.2019.05.230 · Cited by 1,469
A short-term building cooling load prediction method using deep learning algorithms
Fan, C., Xiao, F., & Zhao, Y. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.03.064 · Cited by 692
An Attentive Survey of Attention Models
Chaudhari, S., Mithal, V., Polatkan, G., & Ramanath, R. (2021) · ACM Transactions on Intelligent Systems and Technology · doi:10.1145/3465055 · Cited by 689
Random Forest based hourly building energy prediction
Wang, Z., Wang, Y., Zeng, R., Srinivasan, R. S., & Ahrentzen, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.04.008 · Cited by 635
Olu-Ajayi, R., Alaka, H., Sulaimon, I., Sunmola, F., & Ajayi, S. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103406 · Cited by 543
Building thermal load prediction through shallow machine learning and deep learning
Wang, Z., Hong, T., & Piette, M. A. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114683 · Cited by 503
A deep learning framework for building energy consumption forecast
Somu, N., Raman M R, G., & Ramamritham, K. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110591 · Cited by 500
Research works printed but not linked: 3
- Guan, 2010, Energy-saving analysis on industrial production of edible mushrooms, Edible Fungi, 32, 1
- Kapalo, P., Voznyak, O., Zhelykh, V., and Klymenko, H. (2023). Proceedings of EcoComfort 2022, Springer. Lecture Notes in Civil Engineering, 290 LNCE.
- Kapalo, P., Sulewska, M., and Adamski, M. (2021). Proceedings of EcoComfort 2020, Springer. Lecture Notes in Civil Engineering, 100 LNCE.
Cited by
Peng, D.-G., Liu, Y., Wang, D.-H., Zhao, H.-R., & Qu, B.-G. (2024) · Energy · doi:10.1016/j.energy.2024.132796 · Cited by 52
Temperature Prediction of Mushrooms Based on a Data—Physics Hybrid Approach
Wang, M., Kong, X., Shan, F., Zheng, W., Ren, P., Wang, J., Chen, C., Zhang, X., & Zhao, C. (2024) · Agriculture · doi:10.3390/agriculture14010145 · Cited by 9
Self-citationFeature selection of power system data for frequency prediction with BO-LightGBM-Boruta
Zhou, J., Tong, X., Zhou, J., et al. (2025) · Energy and AI · doi:10.1016/j.egyai.2025.100581 · Cited by 4
Edible Mushrooms: Cultivation Methods and Their Impact
Hait, M., Sahu, P., Biswas, S., & Izah, S. C. (2025) · Reference series in phytochemistry · doi:10.1007/978-3-031-52642-8_8-1 · Cited by 1
Edible Mushrooms: Cultivation Methods and Their Impact
Hait, M., Sahu, P., Biswas, S., & Izah, S. C. (2025) · Reference series in phytochemistry · doi:10.1007/978-3-031-80050-4_8 · Cited by 2
Metadata
- Authors
- Zuo, H., Zheng, W., Wang, M., & Zhang, X.
- Affiliations
- Guangxi University (CN)
- Beijing Academy of Agriculture and Forestry Sciences (CN)
- Corresponding author
- Wang, Mingfei
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2023-10-25
- Volume
- 15
- Issue
- 21
- Pages
- 15270
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W4388263247
- Semantic Scholar
- ee9a31a313510fa4204e6cc85cd782d6c4a1fce8
- Cited by
- 8
- References
- 44
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 2
- FWCI
- 0.60
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- Preprints.org (acceptedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- National Edible Mushroom Industry Technology System (CARS-20, BAIC03-2023)
- Beijing Edible Mushroom Innovation Team (CARS-20, BAIC03-2023)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Energy Load and Power Forecasting
- Physical Sciences › Engineering › Building and Construction › Building Energy and Comfort Optimization
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Smart Agriculture and AI
- Keywords
- short-term load forecasting, mushroom house, heat load, cold load, empirical wavelet transform, CNN-BiLSTM-Attention, ARIMA, Boruta feature selection, air conditioning energy saving
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-28, under version 3 of the claim definition (prompt extract-v3).
A second model labelled each claim on 2026-09-28 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition. https://app.cochat.ai/papers/10.3390/su152115270
- The paper
- Zuo, H., Zheng, W., Wang, M., & Zhang, X. (2023). Prediction of Heat and Cold Loads of Factory Mushroom Houses Based on EWT Decomposition. Sustainability. https://doi.org/10.3390/su152115270
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.