Aspects of Spodumene Lithium Extraction Techniques
Open accessThe DOI matches its Crossref record; 106 of the 106 references it cites were found in a registry or an index.
Abstract
Lithium (Li), a leading cathode material in rechargeable Li-ion batteries, is vital to modern energy storage technology, establishing it as one of the most impactful and strategical elements. Given the surge in the electric car market, it is crucial to improve lithium recovery from its rich mineral deposits using the most effective extraction technique. In recent years, both industry and academia have shown significant interest in Li recovery from various Li-bearing minerals. Of these, only extraction from spodumene has established a reliable industrial production of Li salts. The current approaches for cracking of the naturally occurring, stable α-spodumene structure into a more open structure—β-spodumene—involve the so-called decrepitation process that takes place at extreme temperatures of ~1100 °C. This conversion is necessary, as β-spodumene is more susceptible to chemical attacks facilitating Li extraction. In the last several decades, many techniques have been demonstrated and patented to process hard-rock mineral spodumene. The objective of this review is to present a thorough analysis of significant findings and the enhancement of process flowsheets over time that can be useful for both research endeavors and industrial process improvements. The review focuses on the following techniques: acid methods, alkali methods, carbonate roasting/autoclaving methods, sulfuric acid roasting/autoclaving methods, chlorinating methods, and mechanochemical activation. Recently, microwaves (MWs), as an energy source, have been employed to transform α-spodumene into β-spodumene. Considering its energy-efficient and short-duration aspects, the review discusses the interaction mechanism of MWs with solids, MW-assisted decrepitation, and Li extraction efficiencies. Finally, the merits and/or disadvantages, challenges, and prospects of the processes are summarized.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The comparison of water and energy consumption across lithium extraction technologies highlights significant variations in resource efficiency (Figure 3).”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [14]
In the citing paper
“Direct Lithium Extraction (DLE) emerges as the most resource-efficient option, using only 20 m 3 of water per ton of LCE while consuming 50 GJ/ton LCE, a reflection of its advanced chemical and adsorption technologies.”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [14]
In the citing paper
“Hard rock mining has moderate scalability, limited by energy intensity and environmental impact.”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [14]
In the citing paper
“Indeed, evaporation ponds are easily scalable but unsustainable due to high land and water usage.”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [14]
In the citing paper
“Evaporation ponds are the most water-intensive, consuming approximately 500 m 3 of water per ton of lithium carbonate equivalent (LCE), with relatively low energy requirements of 10 MJ/ton LCE due to reliance on natural evaporation.”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [14]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Fluorescence spectroscopy and multi-way techniques. PARAFAC
Murphy, K. R., Stedmon, C. A., Graeber, D., & Bro, R. (2013) · Analytical Methods · doi:10.1039/c3ay41160e · Cited by 2,060
Meshram, P., Pandey, B. D., & Mankhand, T. R. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.10.012 · Cited by 982
Hydrometallurgical Processes for Recycling Spent Lithium-Ion Batteries: A Critical Review
Yao, Y., Zhu, M., Zhao, Z., Tong, B., Fan, Y., & Hua, Z. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03545 · Cited by 898
Mishra, R. R., & Sharma, A. K. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.035 · Cited by 895
Synthesis of Inorganic Solids Using Microwaves
Rao, K. J., Vaidhyanathan, B., Ganguli, M., & Ramakrishnan, P. A. (1999) · Chemistry of Materials · doi:10.1021/cm9803859 · Cited by 803
Environmental impact of direct lithium extraction from brines
Vera, M. L., Torres, W. R., Galli, C. I., Chagnes, A., & Flexer, V. (2023) · Nature Reviews Earth & Environment · doi:10.1038/s43017-022-00387-5 · Cited by 766
Choubey, P. K., Kim, M.-S., Srivastava, R. R., Lee, J.-C., & Lee, J.-Y. (2016) · Minerals Engineering · doi:10.1016/j.mineng.2016.01.010 · Cited by 529
Mineral Commodity Summaries 2019
Survey, U. S. G. (2019) · Mineral Commodity Summaries · doi:10.3133/70202434 · Cited by 489
The beneficiation of lithium minerals from hard rock ores: a review
Tadesse, B., Makuei, F., Albijanic, B., & Dyer, L. (2019) · Minerals Engineering · doi:10.1016/j.mineng.2018.11.023 · Cited by 452
Inductively coupled plasma mass spectrometry (ICP MS): a versatile tool
Ammann, A. A. (2007) · Journal of Mass Spectrometry · doi:10.1002/jms.1206 · Cited by 400
Research works printed but not linked: 7
- Labbé, J.-F., and Daw, G. (2024, September 26). Panorama 2011 du Marché du Lithium. Bureau de Recherches Géologiques et Minières [BRGM]; Centre d’Economie de la Sorbonne [CES]. Available online: https://shs.hal.science/halshs-00809298/.
- Freiser, H. (2012). Ion-Selective Electrodes in Analytical Chemistry, Springer Science & Business Media.
- Tian, 2011, Roasting and leaching behavior of spodumene in sulphuric acid process, Xiyou Jinshu/Chin. J. Rare Met., 35, 118
- Tiihonen, M., Haavanlammi, L., Kinnunen, S., and Kolehmainen, E. (2019, January 4–6). Outotec lithium hydroxide process-a novel direct leach process for the production of battery grade lithium hydroxide monohydrate form calcined spodumene. Proceedings of the ALTA 2019, Sydney, Australia.
- Braga, P., França, S., Neumann, R., Rodriguez, M., and Rosales, G. (2019, January 19–21). Alkaline process for extracting lithium from Spodumene. Proceedings of the 11th International Seminar on Process Hydrometallurgy-Hydroprocess, Santiago, Chile.
- Antonucci, V., and Correa, C. (1995, January 26–29). Sulfuric Acid Leaching of Chalcopyrite Concentrate Assisted by Application of Microwave Energy, Paper from COPPER 95, Volume III, Electrorefining and Hydrometallurgy of Copper. Proceedings of the International Conference, Santiago, Chile.
- Beard, G., Belcher, W., Bradhurst, D., Worner, H., and Cook, J. (1992, January 12–15). Microwave-Assisted Smelting of Rare-Earth Magnet Alloys. Proceedings of the Twelfth International Workshop on Rare-Earth Magnets and Their Applications, Canberra, Australia.
Cited by
Ruberti, M. (2024) · Sustainability · doi:10.3390/su17010160 · Cited by 35
Review of Recent Advances in Lithium-Ion Batteries: Sources, Extraction Methods, and Industrial Uses
Fatoki, O., Mohammed, H., Parupelli, S. K., Mathew, A., Kaur, M., Rehmat, A., Muhammed, S., Bastakoti, B. P., & Desai, S. S. (2025) · Batteries · doi:10.3390/batteries11120433 · Cited by 24
“Other studies discussed emerging methods aimed at reducing residence time and energy demand [65], as well as a thermodynamic framework for selecting calcination conditions [66].”
Sharifian, S., Nikfar, S., Subasinghe, C., Iranmanesh, Z., Rezaee, M., & Vahidi, E. (2025) · Green Chemistry · doi:10.1039/d5gc04866d · Cited by 18
Mobile Charging Stations: A Comprehensive Review of Converter Topologies and Market Solutions
Neto, R. C., Bandeira, C. M., Azevedo, G. M. S., Limongi, L. R., de Carvalho, M. R. S., Castro, J. F. C., Rosas, P. A. C., Venerando, A. C., Spader, N., & Bueno, E. J. (2024) · Energies · doi:10.3390/en17235931 · Cited by 16
Refining α-Spodumene with Potassium Sulfate Compared to the Conventional Sulfuric Acid Process
Ncube, T., Oskierski, H. C., Senanayake, G., Bertau, M., Skut, J., Canales, J., & Dlugogorski, B. Z. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c06207 · Cited by 15
Impact of Circular Economy Indicators on the Lithium Supply Chain: A Case Study in Mexico
Vega-Muratalla, V. O., Serrano-Arévalo, T. I., Márquez, C. R., Lira‐Barragán, L. F., & Ponce‐Ortega, J. M. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c04951 · Cited by 10
Knapik, E., Rotko, G., Piotrowski, M., & Marszałek, M. (2024) · Materials · doi:10.3390/ma17246269 · Cited by 8
“The processing of the spodumene-bearing ore includes excavation, grinding, milling, froth flotation and refining of the obtained concentrate [10,11].”
Recent Advances in Lithium Resource Extraction Utilizing Oxide‐Based Lithium Superionic Conductors
Xiao, N., Fu, R., Li, B., Jiang, L., Liu, S., Lu, Y., Zhang, Z., & Liu, F. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202520195 · Cited by 19
Yessengaziyev, A., Karshyga, Z., Yersaiynova, A., Tastanova, A., Smailov, K., Mukangaliyeva, A., & Orynbayev, B. (2025) · Metals · doi:10.3390/met15101133 · Cited by 7
Mousavinezhad, S., Sharifian, S., Nikfar, S., & Vahidi, E. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.5c09948 · Cited by 6
Impact of Al and Cu Current Collectors on Li-Ion Battery Recycling
Bologna, A., Liu, D., Antall, S. A., Schmidt, B., Zhang, R., Seeler, F., Schierle‐Arndt, K., & Seshadri, R. (2025) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.5c00528 · Cited by 5
Hakim, S. E., Randi, A., Sterpenich, J., & Chagnes, A. (2025) · MetalMat · doi:10.1002/metm.70011 · Cited by 4
“The α‐spodumene has a highly stable monoclinic crystal structure that resists typical acid or caustic treatments, making direct lithium recovery ineffective [7].”
Majalis, A. N., Ningsih, S., Azis, M. Y., Rachmawati, R., & Zulfikar, M. A. (2026) · Kuwait Journal of Science · doi:10.1016/j.kjs.2026.100558 · Cited by 3
Mekkawy, S. A., Abd-El-Aly, I. S., Hashem, H. M., Hebishy, A. M. S., Moneim, A. E. A., & Abdelfattah, M. S. (2025) · Current Organocatalysis · doi:10.2174/0122133372378865250603042708 · Cited by 2
Influence of Bioadditives on Copper Leaching from Low-Grade Raw Materials
Kenzhaliyev, B., Koizhanova, A., Surkova, T., Yessimova, D., Magomedov, D., & Dosymbayeva, Z. (2025) · ChemEngineering · doi:10.3390/chemengineering9050103 · Cited by 2
“Biooxidation presents an attractive alternative to conventional physicochemical ore processing methods, offering lower resource consumption and a significantly reduced environmental footprint [3,8–10].”
Gantz, P. C., Senkyr, C. A., Kilian, R., Neumann, A., Korges, M., Frick, D. A., Roggendorf, H., Wehrspohn, R. B., Stöber, S., & Stephan‐Scherb, C. (2026) · Advanced Science · doi:10.1002/advs.202523988 · Cited by 2
“As both elements are also typical impurities in spodumene, the refining process already features mechanisms to remove those impurities, for example, by filtering the solution [ 14 ].”
InfluentialRoasting Extraction of Lithium from Fly Ash: A Study of Influential Parameters and Mechanisms
Li, F., Liu, J., Lv, L., Mu, X., Ren, Y., & Zhu, G. (2025) · Applied Sciences · doi:10.3390/app15031280 · Cited by 1
Samouhos, M., Spyrou, K., Pagonis, I., Oustadakis, P., & Taxiarchou, M. (2025) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-025-01174-4 · Cited by 1
Vega-Muratalla, V. O., Pavão, L. V., Costa, C. B. B., Ravagnani, M. A. S. S., Lira‐Barragán, L. F., & Ponce‐Ortega, J. M. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.123221 · Cited by 1
Cai, X., Wang, M., Li, M., Li, F., Guo, Z., Wang, H., & Ma, D. (2025) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-025-06479-8 · Cited by 1
Qu, J., Zhang, T., Hao, X., Ma, N., Dou, Z., & Zhang, T. (2025) · Nanomaterials · doi:10.3390/nano15241889 · Cited by 1
“Therefore, the effects of these factors on the vanadium and sodium leaching rates were evaluated [23].”
Rediscovering Sodium Ionophores as Selective Agents for Lithium Recognition and Extraction
Narodowiec, J., Kazimierczak, A., Grela, M., Ceborska, M., Matczuk, M., Morawiak, M., & Dąbrowa, K. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.3249075 · Cited by 2
“…ores, mostly mined in Australia and processed in China [2, 3], involves energy-intensive thermal treatment and the use of aggressive chemicals [4, 5], while brine evaporation, used extensively in the Lithium Triangle in South America [6], often requires several months to years and typically…”
Ni, C., Liu, C., Cheng, C., Liu, D., Zhu, J., & Liang, Y. (2026) · Powder Technology · doi:10.1016/j.powtec.2026.123093 · Cited by 1
Farai, K., Anthony, P., Tanaka, D. D., & Mufaro, S. N. (2025) · i-manager s Journal on Chemical Sciences · doi:10.26634/jchem.5.1.21800
β-spodumene-derived Li4SiO4-based sorbents for CO2 capture via a purification-free approach
Zhang, Z., Tan, Y., Liu, W., & Xu, M. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.119383 · Cited by 2
RABEARISOA, S. R., Fabien, R., RAHELIVOLOLONIAINA, B. R., Elidon, R. J., & RAZAFIMAHATRATRA, A. J. E. (2025) · International Journal of Research Publication and Reviews · doi:10.55248/gengpi.6.1025.3687
Characterisation and Metallurgical Testwork of Lithium and Rubidium Ore
Togtokhbaatar, P.-O., Myagmarsuren, B., & Baatar, B. (2025) · Advances in engineering research/Advances in Engineering Research · doi:10.2991/978-94-6463-928-5_8
Soto, J. I. M., Tapia, J. C. J., Cardona, F. P., Pérez, M. R., Guerrero, M. F., García, R. V., Sánchez, V. A., Cisneros-Flores, G., & Martínez, A. H. (2026) · The minerals, metals & materials series · doi:10.1007/978-3-032-13776-0_26
Rediscovering Sodium Ionophores as Selective Agents for Lithium Recognition and Extraction
Narodowiec, J., Kazimierczak, A., Grela, M., Ceborska, M., Matczuk, M., Morawiak, M., & Dąbrowa, K. (2026) · Angewandte Chemie · doi:10.1002/ange.3249075 · Cited by 1
Ling, H., Chen, Y., Zhao, Y., Zhou, Z., Ding, Y., Fang, D., & Ling, X. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132270
Rejmer, W., Racewicz, S., & Wierzbicki, S. (2026) · Chemical and Process Engineering New Frontiers · doi:10.24425/cpe.2026.158130
“…transition-metal oxides remain unrivalled in delivering the highest gravimetric and volumetric energy density, which explains their dominance in electric-vehicle applications where driving range is paramount (Manthiram, 2017; Nandihalli et al., 2024; Nitta et al., 2015; Zanoletti et al., 2024).”
Treatments of a Nigerian spodumene ore: activation, extraction, and kinetics studies
Abdulkareem, A. Y., & Alafara, A. (2026) · Indian Chemical Engineer · doi:10.1080/00194506.2026.2693784
Zhu, X., Fu, K., Qiu, Y., Tan, G., Chen, T., & Han, Y. (2026) · Minerals Engineering · doi:10.1016/j.mineng.2026.110757
Xian, Y., Jiang, W., Tang, B., Yang, X., Peng, P., Zhang, W., Li, C., Guan, C., Guo, Y., Jiang, P., et al. (2026) · JOM · doi:10.1007/s11837-026-08657-z
Li, F., Cai, X., Guo, M., Su, Z., Ma, D., Tian, Y., & Feng, Z. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7304526
Integrated conversion of β-spodumene into Li4SiO4-based sorbents for high-temperature CO2 capture
Zhang, Z., Li, Z., Tan, Y., Liu, W., Chen, L., & Xu, M. (2026) · Separation and Purification Technology · doi:10.1016/j.seppur.2026.140126
Zhang, L., Liu, Y., Li, J., Long, J., Yu, L., Yang, X., & Wu, K. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.148087
Optimizing Sulfuric Acid 98% Leaching: Lithium Recovery from Madagascar Spodumene
Hajarivonirina, R. S. R. A. R. N. R. F. R., & Baholy, R. R. (2025) · Budapest International Research in Exact Sciences (BirEx Journal) · doi:10.33258/birex.v7i4.8114
Selective Fractionation and Valorization of Lithium Refinery Residues: A Critical Review
Song, Z., Xu, W., Guan, Q., Li, J., Tang, H., & Wu, F. (2026) · Molecules · doi:10.3390/molecules31193539
“Finally, following evaporation and concentration, Na 2 CO 3 is added to precipitate Li 2 CO 3 [26–28].”
Lithium extraction from ore and waste streams with molten salts – A review
Garg, S., Kaddah, F. C., Mostafazadeh, R., Razmjou, A., & Dumée, L. F. (2026) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2026.130022
A fluorescence imaging system for the identification and quantification of spodumene
Wilske, C., Beniwal, D., Moffatt, J. E., Holfeld, H., Asp, J., Payten, T. B., Eskdale, A., Slattery, T. M., Tsiminis, G., Schartner, E. P., et al. (2026) · Minerals Engineering · doi:10.1016/j.mineng.2026.111020
Metadata
- Authors
- Nandihalli, N., Chouhan, R. K., Kuchi, R., & Hlova, I. Z.
- Affiliations
- United States Department of Energy (US)
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2024-09-30
- Volume
- 16
- Issue
- 19
- Pages
- 8513
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W4402964476
- Cited by
- 33
- References
- 105
- Citations by year
- 2026: 14 · 2025: 15 · 2024: 4
- FWCI
- 4.43
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- US Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Materials and Manufacturing Technologies Office (AL-12-350-001, DE-AC02-07CH11358)
- Iowa State University (AL-12-350-001, DE-AC02-07CH11358)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Materials Science › Metals and Alloys › Metal Extraction and Bioleaching
- Physical Sciences › Engineering › Mechanical Engineering › Mineral Processing and Grinding
- Keywords
- spodumene, lithium recovery, decrepitation, acid leaching, alkaline leaching, sulfuric acid roasting, autoclaving, chlorination, mechanochemical activation, lithium-ion battery cathodes, process flow diagram
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.