The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Comparative Analysis of Battery and Thermal Energy Storage for Residential Photovoltaic Heat Pump Systems in Building Electrification
Abstract
Buildings with electrified heat pump systems, onsite photovoltaic (PV) generation, and energy storage offer strong potential for demand flexibility. This study compares two storage configurations, thermal energy storage (TES) and battery energy storage (BESS), to evaluate their impact on cooling performance and cost savings. A Model Predictive Control (MPC) framework was developed to optimize system operations, aiming to minimize costs while maintaining occupant comfort. Results show that both configurations achieve substantial savings relative to a baseline. The TES system reduces daily operating costs by about 50%, while the BESS nearly eliminates them (over 90% reduction) and cuts grid electricity use by more than 65%. The BESS achieves superior performance because it can serve both the controllable heating, ventilation, and air conditioning (HVAC) system and the home’s broader electrical loads, thereby maximizing PV self-consumption. In contrast, the TES primarily influences the thermal load. These findings highlight that the choice between thermal and electrical storage greatly affects system outcomes. While the BESS provides a more comprehensive solution for whole-home energy management by addressing all electrical demands, further techno-economic evaluation is needed to assess the long-term feasibility and trade-offs of each configuration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
EnergyPlus: creating a new-generation building energy simulation program
Crawley, D. B., Lawrie, L. K., Winkelmann, F. C., Buhl, W. F., Huang, Y. J., Pedersen, C. O., Strand, R. K., Liesen, R. J., Fisher, D. E., Witte, M. J., et al. (2001) · Energy and Buildings · doi:10.1016/s0378-7788(00)00114-6 · Cited by 2,822
An overview of thermal energy storage systems
Alva, G., Lin, Y., & Fang, G. (2018) · Energy · doi:10.1016/j.energy.2017.12.037 · Cited by 1,408
Theory and applications of HVAC control systems – A review of model predictive control (MPC)
Afram, A., & Janabi-Sharifi, F. (2014) · Building and Environment · doi:10.1016/j.buildenv.2013.11.016 · Cited by 1,310
Review on model predictive control: an engineering perspective
Schwenzer, M., Ay, M., Bergs, T., & Abel, D. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07682-3 · Cited by 1,132
All you need to know about model predictive control for buildings
Drgoňa, J., Arroyo, J., Cupeiro Figueroa, I., Blum, D., Arendt, K., Kim, D., Ollé, E. P., Oravec, J., Wetter, M., Vrabie, D. L., et al. (2020) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2020.09.001 · Cited by 1,020
Energy storage systems: a review
Mitali, J., Dhinakaran, S., & Mohamad, A. A. (2022) · Energy Storage and Saving · doi:10.1016/j.enss.2022.07.002 · Cited by 911
State of the art of thermal storage for demand-side management
Arteconi, A., Hewitt, N. J., & Polonara, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.12.045 · Cited by 512
Yao, Y., & Shekhar, D. K. (2021) · Building and Environment · doi:10.1016/j.buildenv.2021.107952 · Cited by 447
Sadeghi, G. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.01.017 · Cited by 380
Seasonal thermal energy storage: A techno-economic literature review
Yang, T., Liu, W., Kramer, G. J., & Sun, Q. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110732 · Cited by 324
Battery storage system for residential electricity peak demand shaving
Leadbetter, J., & Swan, L. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.09.035 · Cited by 282
Tang, H., Wang, S., & Li, H. (2021) · Energy · doi:10.1016/j.energy.2020.119598 · Cited by 259
A new kind of phase change material (PCM) for energy-storing wallboard
Chen, C., Guo, H., Liu, Y., Yue, H., & Wang, C. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2007.07.002 · Cited by 219
Thermochemical energy storage system for cooling and process heating applications: A review
Desai, F., Sunku Prasad, J., Muthukumar, P., & Rahman, M. M. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113617 · Cited by 196
A comprehensive review on the recent advances in materials for thermal energy storage applications
Tawalbeh, M., Khan, H. A., Al–Othman, A., AlMomani, F. A., & Ajith, S. (2023) · International Journal of Thermofluids · doi:10.1016/j.ijft.2023.100326 · Cited by 178
Wang, H., Wang, S., & Tang, R. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.04.159 · Cited by 165
Experimental validation of a CFD and an ε-NTU model for a large tube-in-tank PCM system
Tay, N. H. S., Bruno, F., & Belusko, M. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.06.004 · Cited by 82
Chen, Q., Kuang, Z., Liu, X., & Zhang, T. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.122231 · Cited by 79
Modeling of phase change materials for applications in whole building simulation
Mirzaei, P. A., & Haghighat, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.053 · Cited by 77
Bao, G., Liu, X., Zou, B., Yang, K., Zhao, J., Zhang, L., Chen, M., Qiao, Y., Wang, W., Tan, R., et al. (2025) · Energy · doi:10.1016/j.energy.2025.135548 · Cited by 65
Yang, S., Gao, H., & You, F. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.120023 · Cited by 59
Serale, G., Fiorentini, M., Capozzoli, A., Cooper, P. W., & Perino, M. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.07.099 · Cited by 57
Sebarchievici, C., & Sârbu, I. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.11.020 · Cited by 52
Yang, S., Gao, H., & You, F. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.120054 · Cited by 52
Liu, M., Guo, M., Fu, Y., O’Neill, Z. D., & Gao, Y. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.123753 · Cited by 41
Self-citationHlanze, P., Jiang, Z., Cai, J., & Shen, B. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.120796 · Cited by 40
Electric-thermal energy storage using solid particles as storage media
Ma, Z., Gifford, J., Wang, X., & Martinek, J. G. (2023) · Joule · doi:10.1016/j.joule.2023.03.016 · Cited by 40
Building America House Simulation Protocols (Revised)
Hendron, R., & Engebrecht, C. (2010) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/989422 · Cited by 39
Wetter, M., Benne, K., Tummescheit, H., & Winther, C. (2023) · Journal of Building Performance Simulation · doi:10.1080/19401493.2023.2266414 · Cited by 37
Inkeri, E., Tynjälä, T., & Nikku, M. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118819 · Cited by 34
Liu, M., Ooka, R., Choi, W., & Ikeda, S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113359 · Cited by 32
Self-citationChen, W.-A., Lim, J., Miyata, S., & Akashi, Y. (2022) · Sustainable Cities and Society · doi:10.1016/j.scs.2022.103751 · Cited by 31
Self-citationPrototype Residential Building Designs for Energy and Sustainability Assessment
Kneifel, J. D. (2012) · doi:10.6028/nist.tn.1765 · Cited by 28
Guo, B., Lemort, V., & Cendoya, A. (2025) · Energy · doi:10.1016/j.energy.2025.136508 · Cited by 15
Gao, Y., Hu, Z., Matsunami, Y., Qu, M. F., Chen, W.-A., & Liu, M. (2025) · Renewable Energy · doi:10.1016/j.renene.2025.124493 · Cited by 6
Self-citation
Research works printed but not linked: 4
- Jia, W., Yang, Z., Liu, M., Fu, Y., and O’Neill, Z. (2023, January 4–8). Model-Based Characterization of Heat Pump—Thermal Energy Storage Systems for Grid-Interactive Services. Proceedings of the ASHRAE Transactions, Atlanta, GA, USA.
- Liu, M., Yang, Z., and O’Neill, Z. (2024, January 15–18). Design And Optimization Of The Conventional Heat Pump With Thermal Energy Storage For Grid-Interactive Efficient Buildings. Proceedings of the 8th International High Performance Buildings Conference, West Lafayette, IN, USA.
- Zhang, Y., Liu, M., Yang, Z., Calfa, C., and O’Neill, Z. (2024, January 14–16). Development and Validation of a Water-to-Air Heat Pump Model Using Modelica. Proceedings of the American Modelica Conference 2024, Storrs, CT, USA.
- Briggs, 2003, Climate Classification for Building Energy Codes and Standards: Part 2-Zone Definitions, Maps, and Comparisons, Ashrae Trans., 109, 122
Metadata
- Authors
- Liu, M., Chen, W.-A., Gao, Y., & Hu, Z.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2025-10-25
- Volume
- 17
- Issue
- 21
- Pages
- 9497
- ISSN
- 2071-1050
- Cited by
- 9
- References
- 35
- Language
- en
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.