Experimental Validation of a Battery Dynamic Model for EV Applications
Open accessThe DOI matches its Crossref record; 7 of the 8 references it cites were found in a registry or an index.
Abstract
This paper presents an improved and easy-to-use battery dynamic model. The charge and the discharge dynamics of the battery model are validated experimentally with four batteries types. An interesting feature of this model is the simplicity to extract the dynamic model parameters from batteries datasheets. Only three points on the manufacturer’s discharge curve in steady state are required to obtain the parameters. Finally, the battery model is included in the SimPowerSystems simulation software and used in a detailed simulation of an electric vehicle based on a hybrid fuel cell-battery power source. The results show that the model can accurately represent the dynamic behaviour of the battery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“A notable feature of this battery model is that its parameters can be easily deduced from experimental discharge curves.”
From Implementation of a 6U CubeSat Electrical Power System Digital Twin (2024) · cites this paper as [18]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles
Tremblay, O., Dessaint, L.-A., & Dekkiche, A.-I. (2007) · 2007 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2007.4544139 · Cited by 1,244
Self-citationDesign of Primary and Secondary Cells
Shepherd, C. M. (1965) · Journal of The Electrochemical Society · doi:10.1149/1.2423659 · Cited by 510 · cited 2×
“Shepherd developed an equation to describe the electrochemical behaviour of a battery directly in terms of terminal voltage, open circuit voltage, internal resistance, discharge current and state-ofcharge [1], and this model is applied for discharge as well as for charge.”
BackgroundMethodDynamic model of a lead acid battery for use in a domestic fuel cell system
Dürr, M., Cruden, A., Gair, S., & McDonald, J. R. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.075 · Cited by 245 · cited 1×
“The most simple electric model consists of an ideal voltage source in series with an internal resistance [2].”
BackgroundDynamic modelling of lead/acid batteries using impedance spectroscopy for parameter identification
Mauracher, P., & Karden, E. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02498-1 · Cited by 222 · cited 1×
“The identification of all the parameters of this model is based on a rather complicated technique called impedance spectroscopy [4].”
MethodModelling Ni-mH battery using Cauer and Foster structures
Kuhn, E., Forgez, C., Lagonotte, P., & Friedrich, G. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.10.018 · Cited by 154 · cited 1×
“There is another model based on an open circuit voltage in series with a resistance and parallel RC circuits with the so-called Warburg impedance [3].”
MethodDischarge and charge modeling of lead acid batteries
Rynkiewicz, R. (1999) · APEC '99. Fourteenth Annual Applied Power Electronics Conference and Exposition. 1999 Conference Proceedings (Cat. No.99CH36285) · doi:10.1109/apec.1999.750438 · Cited by 51 · cited 1×
“For the other batteries (Lead-Acid, NiMH and NiCD), there is a hysteresis phenomenon between the charge and the discharge, no matter the SOC of the battery [6], [7].”
BackgroundA battery model including hysteresis for State-of-Charge estimation in Ni-MH battery
Xuyun, F., & Zechang, S. (2008) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2008.4677449 · Cited by 50
Cited by
Items 401–500 of 1,000
Haidar, A. M. A., & Muttaqi, K. M. (2014) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2014.6978412 · Cited by 18
“system by monitoring the battery voltage, SOC and the battery temperature [7, 30].”
BackgroundMethodLy, T., Goehlich, D., & Heide, L. (2016) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2016.7791621 · Cited by 18
“The battery characteristic is modeled with a generic battery model by Tremblay and Dessaint [19].”
MethodPandi, V. R., Al‐Hinai, A., & Feliachi, A. (2016) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2016.09.004 · Cited by 17
FAST: A Future Aircraft Sizing Tool for Conventional and Electrified Aircraft Design
Mokotoff, P. R., Arnson, M. G., Wang, Y.-C., & Çınar, G. (2025) · AIAA SciTech Forum · doi:10.2514/6.2025-2374 · Cited by 17
Yang, H. C., Qiu, Y., Li, Q., & Chen, W. (2017) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4985092 · Cited by 17
Mali, V., & Tripathi, B. (2020) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-020-01824-z · Cited by 17
Zangeneh, M., Aghajari, E., & Forouzanfar, M. (2021) · Soft Computing · doi:10.1007/s00500-021-06288-x · Cited by 17
“Q, A, and K are capacity, exponential zone, and polarization constant, respectively (Tremblay and Dessaint 2009; Saw et al. 2014).”
BackgroundDecentralized operation of multiple energy storage systems: SOC management for frequency regulation
Shim, J. W., Verbič, G., An, K., Lee, J. H., & Hur, K. (2016) · International Conference on Power System Technology (POWERCON) · doi:10.1109/powercon.2016.7754038 · Cited by 17
“As to the model of the battery, Shepherd model is implemented [5], [6] mimicking the electrochemical tendency of Li-ion battery discharge model (1) and charge model (2) concerning terminal voltage.”
MethodCabello, J. M., Roboam, X., Junco, S., Bru, É., & Lacressonnière, F. (2017) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2017.2683398 · Cited by 17
“Here, the extension presented in [17] of the commonly used analytic semi-empiric Tremblay-Dessaint battery model [16] is used, which allows for an accurate reproduction of the battery output voltage without increasing the model complexity.”
MethodAnalysis and design of power conditioning circuit for piezoelectric vibration energy harvester
Savarimuthu, K., Sankararajan, R., & Murugesan, S. (2017) · IET Science Measurement & Technology · doi:10.1049/iet-smt.2016.0377 · Cited by 17
“Dynamic modelling of the lithium-ion battery is performed with (9) and (10) by considering the charging and discharging conditions [22]”
Accurate battery model parameter identification using heuristic optimization
Jusoh, M. A., & Daud, M. Z. (2020) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v11.i1.pp333-341 · Cited by 17
“In [16], an improved and easy to use generic battery model is presented for electric vehicle applications.”
MethodInfluentialRobayo, M., Mueller, M., Sharkh, S. M., & Abusara, M. A. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106200 · Cited by 17
Lee, J., Kim, Y., & Cha, H. (2011) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2011.6063957 · Cited by 17
Methodology for sizing and optimising a Blended Wing-Body with distributed electric ducted fans
Sgueglia, A. (2019) · theses.fr (ABES) · doi:10.70675/2046c996z7c68z4b65za4ffz08317a09ee02 · Cited by 17
Goswami, G., Jaiswal, S., Nutakor, C., & Sopanen, J. (2022) · IEEE Access · doi:10.1109/access.2022.3211523 · Cited by 16
“The secondary energy source used in this study is a generic rechargeable battery described by the Shepherd equations [63].”
MethodAnalysis of voltage control using V2G technology to support low voltage distribution networks
Mattos, M. M., Archetti, J. A. G., Bitencourt, L. D. A., Wallberg, A., Castellucci, V., Dias, B. H., & Oliveira, J. G. (2023) · IET Generation Transmission & Distribution · doi:10.1049/gtd2.13066 · Cited by 16
“The voltage of the lithium ion battery used in the EV is given by Equation (1)[21].”
Gohari, A., Althuwaini, H., & Shadmand, M. B. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2023.3335462 · Cited by 16
“To emulate the batteries, the following expression is evaluated to determine the voltage value of each dc supply [21], [22] where Q is the capacity of the emulated battery, q’ is the consumed capacity, and i s is the average cell current.”
Adam, A. H. A., Chen, J., Kamel, S., Safaraliev, M., & Матренин, П. В. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.09.247 · Cited by 16
Intelligent Energy Management System for Hybrid Fuel Cell/Battery Powered Ships
Jamma, M., Bujło, P., & Ulleberg, Ø. (2025) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2025.3571358 · Cited by 16
“7 shows the generic battery model used for the dynamic simulation of the lithium-ion battery in this paper, which is based on the equations provided in [18], [19], [20].”
Electric Vehicles charging scenarios associated to Direct Load Control programs (DLC)
Saker, N., Petit, M., & Vannier, J. (2011) · North American Power Symposium (NAPS) · doi:10.1109/naps.2011.6024857 · Cited by 16
Abdelrazek, S. A., & Kamalasadan, S. (2014) · North American Power Symposium (NAPS) · doi:10.1109/naps.2014.6965459 · Cited by 16
“1, The BESS model consists of a lithium polymer battery model which was developed and validated with methods similar to that in [18].”
MethodA novel design of charge controller for a standalone solar photovoltaic system
Subashini, M., & Ramaswamy, M. (2016) · International Conference on Electrical Energy Systems (ICEES) · doi:10.1109/icees.2016.7510647 · Cited by 16
“MODELING OF VALVE REGULATED LEAD ACID BATTERY The 6SGL100 valve regulated lead acid battery (VRLA) battery in the SOLATRON SGL series with unique GEL technology from EXIDE is modeled by the procedure and equations in [12] with the data in the Table II.”
MethodD’Arco, S., Quraan, M., Tricoli, P., & Piegari, L. (2016) · International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) · doi:10.1109/speedam.2016.7525982 · Cited by 16
Research on a Novel Hydraulic/Electric Synergy Bus
Zhao, K., Liang, Z., Huang, Y., Wang, H., Khajepour, A., & Zhen, Y. (2017) · Energies · doi:10.3390/en11010034 · Cited by 16
“The detailed discharge/c ar e model and efficiency model of the battery refer to the literature [21].”
BackgroundMethodModeling and control of dynamic battery storage system used in hybrid grid
Sarita, K., Devarapalli, R., & Rai, P. (2020) · Energy Storage · doi:10.1002/est2.146 · Cited by 16
“The battery charging and discharging behavior can be expressed through SoC equation as given in Equation (17).”
MethodInfluentialVoltage-Frequency Control (v-f) of Islanded Microgrid Based on Battery and MPPT Control
Dashtdar, M., & Dashtdar, M. (2020) · American Journal of Electrical and Computer Engineering · doi:10.11648/j.ajece.20200402.12 · Cited by 16
Modeling and Experimental Evaluation of Energy Storage Emulator for Microgrids Application
Filho, P. S. N., Silveira, J. P. C., Neto, P. J. D. S., Paula, M. V. D., Barros, T. A. D. S., & Filho, E. R. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3055079 · Cited by 16
Modeling and Simulation for Capacity Fade Prediction of Lithium-Ion Battery
Bairwa, B., Hampannavar, S., Vishal, K. S., & Bhargavi, K. M. (2021) · IEEE EUROCON - International Conference on Computer as a Tool (EUROCON) · doi:10.1109/eurocon52738.2021.9535594 · Cited by 16
Modeling of the Electric Vehicle Charging Process - Part 1
Matanov, N., Zahov, A., & Angelov, I. (2021) · Electrical Engineering Faculty Conference (BulEF) · doi:10.1109/bulef53491.2021.9690836 · Cited by 16
A Comprehensive Energy Model for an Optimal Design of a Hybrid Refrigerated Van
Maiorino, A., Mota-Babiloni, A., Petruzziello, F., Duca, M. G. D., Ariano, A., & Aprea, C. (2022) · Energies · doi:10.3390/en15134864 · Cited by 17
Acausal Modelling and Dynamic Simulation of the Standalone Wind-Solar Plant Using Modelica
Dizqah, A. M., Maheri, A., Busawon, K., & Fritzson, P. (2013) · UKSim International Conference on Computer Modelling and Simulation (UKSim) · doi:10.1109/uksim.2013.145 · Cited by 16
“The performance of a WT can be characterized with an experimental power coefficient curve [3].”
Solar PV fed standalone DC microgrid with hybrid energy storage system
Sinha, S., Sinha, A., & Bajpai, P. (2017) · International Conference on Computer Applications in Electrical Engineering-Recent Advances (CERA) · doi:10.1109/cera.2017.8343296 · Cited by 16
Simple Spec-Based Modeling of Lithium-Ion Batteries
Kazhamiaka, F., Keshav, S., Rosenberg, C., & Pettinger, K. (2018) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2018.2838441 · Cited by 16
“A later publication [16] describes improvements to the model equations that are specific to each battery chemistry, and presents experiments that are used to evaluate the accuracy of the models.”
BackgroundMethodInfluentialAn Advanced Battery Model for WSN Simulation in Environments With Temperature Variations
Rodrigues, L. M., Leão, É., Montez, C., Moraes, R., Portugal, P., & Vasques, F. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2863549 · Cited by 16
Adaptive Model Predictive Control for Real-Time Dispatch of Energy Storage Systems
Copp, D. A., Nguyen, T. A., & Byrne, R. H. (2019) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.23919/acc.2019.8814902 · Cited by 16
“, [17], and is derived from the TremblayDessaint model [18].”
MethodPassive Fault-Tolerant Control of PWM Converter in a Hybrid AC/DC Microgrid
Jadidi, S., Badihi, H., & Zhang, Y. M. (2019) · International Conference on Renewable Energy and Power Engineering (REPE) · doi:10.1109/repe48501.2019.9025123 · Cited by 16
“Finally, the BESS is modeled based on [9] as a dynamic model of a rechargeable lithium-ion battery.”
MethodTadj, M., Benmouiza, K., & Cheknane, A. (2014) · Simulation Modelling Practice and Theory · doi:10.1016/j.simpat.2014.06.010 · Cited by 16
“The battery used in this work is a lead acid battery with 12 V of voltage and 104 A h of capacity; it is expressed by the following equation [19]: Charge model (i < 0): f ðit; i ; i; ExpÞ 1⁄4 E0 K Q it 0:1Q i K Q Q it it þ Laplace 1 ExpðsÞ SelðsÞ 1 s ð9Þ Discharge model (i > 0): f ðit; i ; i; ExpÞ 1⁄4 E0 K Q Q it i K…”
MethodUse of voyage simulation to investigate hybrid fuel cell systems for marine propulsion
Bassam, A. M. (2017) · ePrints Soton (University of Southampton) · Cited by 16
Janiaud, N. (2011) · theses.fr (ABES) · doi:10.70675/b66064cfz3c6dz42b1z841bz79111fc25290 · Cited by 16
Barman, P., & Azzopardi, B. (2021) · IEEE Access · doi:10.1109/access.2021.3107421 · Cited by 15
“The dischargemodel for the leadacid battery is as in [25]”
MethodDamato, A., Iamarino, M., Ferraro, A., & D’Angola, A. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2385/1/012119 · Cited by 15
“Battery and voltage converters The Li-ion battery model follows a Shepherd-like approach [25], as improved in [26] to facilitate parameters extraction from batteries datasheets and to take into account variable charging and discharging currents.”
MethodMaghfiroh, H., Wahyunggoro, O., & Cahyadi, A. I. (2023) · Mathematical Modelling and Engineering Problems · doi:10.18280/mmep.100539 · Cited by 15
“For more detail about the battery and SC models see studies [21, 22], respectively.”
BackgroundGraber, G., Sabatino, S., Calderaro, V., & Galdi, V. (2024) · Energies · doi:10.3390/en17225629 · Cited by 15
Abdelrazek, S. A., & Kamalasadan, S. (2014) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2014.6978406 · Cited by 15
Chen, Z., Wang, L. Y., Yin, G., Lin, F., & Wang, C. (2013) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2013.2280136 · Cited by 15
“Battery models have been extensively studied that lead to several accepted model structures, including the nonlinear structure [1] that has been used in MATLAB/Simulink demonstration [2], nonlinear circuit models [3], circuits of multibranches [4], and circuits with state-dependent parameters [5].”
BackgroundEnergy Management Strategy for a Bioethanol Isolated Hybrid System: Simulations and Experiments
Rullo, P., Costa‐Castelló, R., Roda, V., & Feroldi, D. (2018) · Energies · doi:10.3390/en11061362 · Cited by 15
Cortés, A., Merino, J., Torres, E., & Mazón, A. J. (2020) · Electric Power Systems Research · doi:10.1016/j.epsr.2020.106785 · Cited by 15
Shevchenko, S., Danylchenko, D. O., Dryvetskyi, S., & Potryvai, A. (2021) · IEEE KhPI Week on Advanced Technology (KhPIWeek) · doi:10.1109/khpiweek53812.2021.9570030 · Cited by 15
Milios, K., Hall, C., Burrell, A., Brooks, J. D., Kenny, J. D., Gladin, J. C., & Mavris, D. N. (2022) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec53557.2022.9813981 · Cited by 15
“Bus voltage is set by the battery according to battery current and capacity based on a discharge curve equation from the work performed by Tremblay et al. [7].”
Effects of the Structure and Operating Parameters on the Performance of an Electric Scooter
Hieu, L. T., & Lim, O. (2023) · Sustainability · doi:10.3390/su15118976 · Cited by 15
“It can correctly describe the dynamics of voltage when the current varies, taking into account the OCV (open-circuit voltage) [29].”
BackgroundData-driven MPPT techniques for optimizing vehicular fuel cell performance in hybrid DC microgrid
Çelık, Ö. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.07.033 · Cited by 15
Selection and implementation of a generic battery model for PHIL applications
Seitl, C., Kathan, J., Lauss, G. F., & Lehfuß, F. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6700016 · Cited by 15
Modeling of vibration energy harvesting system with power PZT stack loaded on Li-Ion battery
Shevtsov, S. N., & Chang, S. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.03.183 · Cited by 15
Load and Source Battery Simulator Based on Z-Source Rectifier
Choi, S.-C., Lee, J.-H., Noh, Y.-S., Kim, D.-Y., Kim, B.-J., & Won, C.-Y. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2617742 · Cited by 15
Pareek, A., Singh, P. K., & Rao, P. N. (2018) · International Conference on Current Trends towards Converging Technologies (ICCTCT) · doi:10.1109/icctct.2018.8551164 · Cited by 15
“During charging mode, polarization resistance will increase till the battery becomes fully charged (it=0) [13], [14].”
BackgroundIntegrated Management of Powertrain and Engine Cooling System for Parallel Hybrid Electric Vehicles
Li, X., Evangelou, S. A., & Lot, R. (2018) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2018.8604994 · Cited by 15
“1) Battery: The Li-ion battery model in this work is based on the battery model from the SimPowerSystems library in Simulink that has been described in [28].”
MethodPerin, I., Walker, G. R., & Ledwich, G. F. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2818641 · Cited by 15
“well suited for implementation within simulation algorithms [39]–[41].”
BackgroundRapid Prototyping Station for Batteries-Supercapacitors Hybrid Energy Storage Systems
Peresada, S. M., Nikonenko, Y., Ковбаса, С. М., Kuznietsov, A., & Pushnitsyn, D. (2019) · IEEE International Conference on Electronics and Nanotechnology (ELNANO) · doi:10.1109/elnano.2019.8783731 · Cited by 15
“The Lead-acid Battery Model Lead-acid battery model [16] is given by”
MethodMeasuring battery discharge characteristics for accurate UAV endurance estimation
Mariga, L., Tiburcio, I. S., Martins, C. A., Prado, A. N. A., & Nascimento, C. L. (2020) · The Aeronautical Journal · doi:10.1017/aer.2020.16 · Cited by 15
“0% of the measured voltage during discharge with a slight increase in lower SOC values as it does not consider the Peukert Effect(10).”
BackgroundMethodInfluentialKommuri, N. K., McGordon, A., Allen, A., & Truong, D. Q. (2020) · Energies · doi:10.3390/en13123122 · Cited by 15
Aaltonen, H., Sierla, S., Kyrki, V., Pourakbari‐Kasmaei, M., & Vyatkin, V. V. (2022) · Energies · doi:10.3390/en15144960 · Cited by 15
“In both implementations, the battery voltage is dependent on the extracted capacity [83], which affects SoC directly.”
BackgroundLee, C.-M., & Lin, W. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.02.062 · Cited by 15
Modeling and Analysis of a Photovoltaic System with a Distributed Energy Storage System
Ma, A. W. (2012) · DigitalCommons - CalPoly (California State Polytechnic University) · doi:10.15368/theses.2012.42 · Cited by 15
Moreno‐Torres, P. (2016) · UPM Digital Archive (Technical University of Madrid) · doi:10.20868/upm.thesis.41040 · Cited by 15
Bridier, L. (2016) · theses.fr (ABES) · doi:10.70675/fe25341az6b4fz4e63z8581ze250cdbf426b · Cited by 15
“, 2015], par exemple avec les batteries embarquées dans les véhicules électriques [Nair and Garimella, 2010][Tremblay and Dessaint, 2009].”
BackgroundDesign and control of battery charger for electric vehicles using modular multilevel converters
Quraan, M., Abu‐Khaizaran, M., Sa'ed, J. A., Hashlamoun, W. A., & Tricoli, P. (2020) · IET Power Electronics · doi:10.1049/pel2.12018 · Cited by 14
“In this paper, the Li-ion cells are modelled during the discharge and recharge modes using battery dynamic model for EV applications given in [38].”
MethodModeling of Batteries and their Assemblies Taking into Account the Degradation of Pa-rameters
Dobrego, K. V., & Bladyko, V. V. (2021) · ENERGETIKA Proceedings of CIS higher education institutions and power engineering associations · doi:10.21122/1029-7448-2021-64-1-27-39 · Cited by 14
Reconfigurable Battery Management System for Microgrid Application
Saravanan, S., Pandiyan, P., Chinnadurai, T., Tiwari, R., Prabaharan, N., Kumar, R. S., & Pugalhanthi, P. L. (2021) · Wiley eBooks · doi:10.1002/9781119710905.ch6 · Cited by 14
Chen, W., Zhang, S., & Dinavahi, V. (2022) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2022.3160416 · Cited by 14
Energy management strategy of hybrid energy system for a multi-lobes hybrid air vehicle
Meng, J., Ma, N., Meng, F., Zhang, X., & Liu, L. (2022) · Energy · doi:10.1016/j.energy.2022.124539 · Cited by 14
Reddy, N. P., Skjetne, R., Os, O. S., & Papageorgiou, D. (2023) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2023.3331230 · Cited by 14
“8, which is based on the dynamic battery model developed by Tremblay et al. [50].”
BackgroundMethodInfluentialShahir, F. M., & Babaei, E. (2017) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc.2017.7910388 · Cited by 14
A cyber physical energy system design (CPESD) for electric vehicle applications
Tehrani, K., & Maurice, O. (2017) · International Conference on System of Systems Engineering · doi:10.1109/sysose.2017.7994969 · Cited by 14
Ameur, K., Hadjaissa, A., Cheknane, A., & Essounbouli, N. (2017) · Electric Power Components and Systems · doi:10.1080/15325008.2017.1318976 · Cited by 14
“It is totally based on the battery model presented in [25] and [26].”
MethodPower management for hybrid distributed generation systems
Yousef, H., Al‐Badi, A. H., & Polycarpou, A. (2017) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2017.1387825 · Cited by 14
“The most common type of electrolyser is the one based on Alkaline water electrolysis (Tremblay and Dessaint 2009) The terminal voltage of each electrolyser cell, Vc, is expressed as (14)NH2 = Ifc 2F (15) MFCCFC dTFC dt = qnet qnet = qch − qel − qsl − qloss (16)Vc = Vrc +…”
BackgroundInfluentialDesign methodology for a dc–dc power conversion system with EIS capability for battery packs
Díaz‐González, F., Heredero-Peris, D., & Arellano, S. G. (2018) · Simulation Modelling Practice and Theory · doi:10.1016/j.simpat.2018.05.008 · Cited by 14
“This R-C association acts as a low pass filter for the charge-transfer reactions with a time constant yielded by Rct∆Cct, so at high frequencies (typically above 100 Hz [45, 42] for lead-acid and lithium-ion cells, for instance).”
BackgroundTowards a Battery Characterization Methodology for Performance Evaluation of Micro-Grid Systems
Boulmrharj, S., NaitMalek, Y., Elmouatamid, A., Ouladsine, R., Bakhouya, M., Moussa, M. O., Zine-Dine, K., Khaidar, M., & Abid, R. (2018) · International Conference on Smart Energy Systems and Technologies (SEST) · doi:10.1109/sest.2018.8495829 · Cited by 14
“The OCV is then expressed as a function of the battery’s SoC.”
BackgroundMethodInfluentialModeling Battery under Discharge Using Improved Thevenin-Shepherd Electrical Battery Model
Hidalgo-León, R., Urquizo, J., Ruiz, P. J., Litardo, J., Singh, P., Wu, J., & Soriano, G. (2018) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2018.8604958 · Cited by 14
“The Shepherd equation of open circuit voltage (E) used in the present paper [6], [7] is as follows:”
MethodYazvinskaya, N. N., Galushkin, N. E., Galushkin, D. N., & Kalmykov, B. (2019) · International Journal of Electrochemical Science · doi:10.20964/2020.01.18 · Cited by 14
Abdelrazek, S. A., Kamalasadan, S., Enslin, J. H. R., & Fenimore, T. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7309670 · Cited by 14
“The lithium polymer battery model was developed and validated based on methods similar to that in [13].”
BackgroundMethodNassef, A. M., Fathy, A., & Rezk, H. (2019) · Energies · doi:10.3390/en12193796 · Cited by 14
BATTERY DYNAMIC MODEL IMPROVEMENT WITH PARAMETERS ESTIMATION AND EXPERIMENTAL VALIDATIONPreprint
Cabello, J. M., Bru, É., Roboam, X., Lacressonnière, F., & Junco, S. (2015) · HAL · Cited by 14
Brondani, M. D. F. (2015) · Americanae (AECID Library) · Cited by 14
Álvarez, J. N. (2020) · UPM Digital Archive (Technical University of Madrid) · doi:10.20868/upm.thesis.66547 · Cited by 14
Implementation of a 6U CubeSat Electrical Power System Digital Twin
Casado, P., Torres, C., Blanes, J. M., Garrigós, A., & Marroquí, D. (2024) · Aerospace · doi:10.3390/aerospace11080688 · Cited by 13
“A notable feature of this The steady-state general battery model described in [18] was utilized; this model comprises a nonlinear voltage source (E) with a series resistance (Rbat). ba tt ery model is that its parameters can be easily deduced from experimental discharge curves.”
MethodMiniguano, H., Barrado, A., & Lázaro, A. (2021) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2021.3112284 · Cited by 13
“mental data, including mathematical equations based on statistical analysis and equations representing a general approximation, as described in [10] and [11] for batteries and in [12] and [13] for supercapacitors.”
MethodPerformance evaluation of a hybrid photovoltaic-vapor compression system serving a refrigerated van
Maiorino, A., Petruzziello, F., Cilenti, C., Llopis, R., & Aprea, C. (2024) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2024.10.021 · Cited by 13
Tabinе, A., Laadissi, Е. M., Еlachhab, A., Bouzaid, S., Ennawaoui, C., & Hajjaji, A. (2024) · e-Prime - Advances in Electrical Engineering Electronics and Energy · doi:10.1016/j.prime.2024.100822 · Cited by 13
Coordinated control strategy for hybrid multi-PEMFC/BESS in a shipboard power system
Aziz, M., Trinh, P.-H., Hudaya, C., & Chung, I. (2025) · Electric Power Systems Research · doi:10.1016/j.epsr.2025.111495 · Cited by 13
Multi-Criteria Experimental Comparison of Batteries Circuital Models for Automotive Applications
Nobile, G., Cacciato, M., Scarcella, G., & Scelba, G. (2018) · Communications - Scientific letters of the University of Zilina · doi:10.26552/com.c.2018.1.97-104 · Cited by 13
“J See [8],[11] See [8],[11] K See [8],[12] See [8],[12]”
BackgroundMethodJaraniya, D., & Kumar, S. (2021) · Journal of The Institution of Engineers (India) Series B · doi:10.1007/s40031-021-00689-0 · Cited by 13
Application of the Voltage Control Technique and MPPT of Stand-alone PV System with Storage
Hivziefendić, J., Vuić, L., Lale, S., & SARIC, M. (2022) · Advances in Electrical and Computer Engineering · doi:10.4316/aece.2022.01003 · Cited by 13
A Hybrid Multi-Loop Controlled FACTS-based Smart V2G Battery Chargers
Khaki, B., & Sharaf, A. M. (2013) · International Journal of Renewable Energy Research · Cited by 13
Battery energy storage emulation in a converter-based power system emulator
Boles, J. D., Ma, Y., Cao, W., Tolbert, L. M., & Wang, F. (2017) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2017.7931029 · Cited by 13
“The battery’s voltage stays close to its rated voltage throughout most of its typical SOC range, and it begins to drop very quickly when the SOC decreases below 20% [15] - [16].”
BackgroundMethodInfluentialScaling of wind energy conversion system for time-accelerated and size-scaled experiments
Varais, A., Roboam, X., Lacressonnière, F., Turpin, C., Cabello, J. M., Bru, É., & Pulido, J. (2018) · Mathematics and Computers in Simulation · doi:10.1016/j.matcom.2018.05.015 · Cited by 13
“The battery model is based on the Tremblay–Dessaint model [21], in which scaling is carried out in [16].”
MethodNarrow Band State of Charge (SOC) Control Strategy for Hybrid Container Cranes
Bolonne, S., & Chandima, D. P. (2019) · Energies · doi:10.3390/en12040743 · Cited by 13
“The discharge model of Li-ion cell used in Simpowersystems has been developed in [16] and it can represent accurately the voltage dynamics during current variations.”
MethodSabhadia, H., Das, B., & Pant, V. (2019) · IET Generation Transmission & Distribution · doi:10.1049/iet-gtd.2018.5203 · Cited by 13
Introduction to Model Engineering for Simulation
Li, Z., Zeigler, B. P., & Laili, Y. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-813543-3.00001-9 · Cited by 13
Faults diagnosis in Stand-Alone photovoltaic system using Artificial Neural Network
Sabri, N., Tlemçani, A., & Chouder, A. (2018) · International Conference on Control, Engineering & Information Technology · doi:10.1109/ceit.2018.8751924 · Cited by 13
“The charge and discharge equation of dynamic model lead-acid battery model used in this work [20], is written consecutively as follows :”
MethodModel Predictive Control for the Energy Management of A Hybrid PV/Battery /Fuel Cell Power Plant
Gonzalez, A. A., Bottarini, M., Vechiu, I., Gautier, L., Ollivier, L., & Larre, L. (2019) · International Conference on Smart Energy Systems and Technologies (SEST) · doi:10.1109/sest.2019.8849051 · Cited by 13
“In the study case, the MPC is based on the storage system linear model proposed by the authors in [16] for the Li-ION battery bank and for the PEMFC system [17].”
Method
Metadata
- Authors
- Tremblay, O., & Dessaint, L.-A.
- Affiliations
- École de Technologie Supérieure (CA)
- Corresponding author
- Tremblay, Olivier
- Venue
- World Electric Vehicle Journal
- Publisher
- MDPI AG
- Published
- 2009-06-26
- Volume
- 3
- Issue
- 2
- Pages
- 289-298
- ISSN
- 2032-6653 (ISSN-L)
- OpenAlex
- W2334134865
- Cited by
- 1,223
- References
- 8
- Citations by year
- 2026: 48 · 2025: 62 · 2024: 76 · 2023: 100 · 2022: 120 · 2021: 99 · 2020: 130 · 2019: 109 · 2018: 85 · 2017: 85 · 2016: 85 · 2015: 52 · 2014: 64 · 2013: 59 · 2012: 33
- FWCI
- 36.10
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- World Electric Vehicle Journal (publishedVersion, cc-by)
- Espace ÉTS (ETS) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Vehicles and Infrastructure
- Keywords
- electric vehicles, SimPowerSystems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.