The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Plastics waste management: A review of pyrolysis technology
Open accessAbstract
The world is today faced with the problem of plastic waste pollution more than ever before. Global plastic production continues to accelerate, despite the fact that recycling rates are comparatively low, with only about 15% of the 400 million tonnes of plastic currently produced annually being recycled. Although recycling rates have been steadily growing over the last 30 years, the rate of global plastic production far outweighs this, meaning that more and more plastic is ending up in dump sites, landfills and finally into the environment, where it damages the ecosystem. Better end-of-life options for plastic waste are needed to help support current recycling efforts and turn the tide on plastic waste. A promising emerging technology is plastic pyrolysis; a chemical process that breaks plastics down into their raw materials. Key products are liquid resembling crude oil, which can be burned as fuel and other feedstock which can be used for so many new chemical processes, enabling a closed-loop process. The experimental results on the pyrolysis of thermoplastic polymers are discussed in this review with emphasis on single and mixed waste plastics pyrolysis liquid fuel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
The Physical Impacts of Microplastics on Marine Organisms: A Review
Wright, S. L., Thompson, R. C., & Galloway, T. S. (2013) · Environmental Pollution · doi:10.1016/j.envpol.2013.02.031 · Cited by 4,524
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
Transport and release of chemicals from plastics to the environment and to wildlife
Teuten, E. L., Saquing, J. M., Knappe, D. R. U., Barlaz, M. A., Jonsson, S., Björn, A., Rowland, S. J., Thompson, R. C., Galloway, T. S., Yamashita, R., et al. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0284 · Cited by 2,938
Microplastics in freshwater ecosystems: what we know and what we need to know
Wagner, M., Scherer, C., Alvarez-Muñoz, D., Brennholt, N., Bourrain, X., Buchinger, S., Fries, E., Grosbois, C., Klasmeier, J., Marti, T., et al. (2014) · Environmental Sciences Europe · doi:10.1186/s12302-014-0012-7 · Cited by 1,543
Sourcing Personal Protective Equipment During the COVID-19 Pandemic
Livingston, E., Desai, A., & Berkwits, M. (2020) · JAMA · doi:10.1001/jama.2020.5317 · Cited by 637
Plastic roads: Not all they’re paved up to be
Conlon, K. (2022) · International Journal of Sustainable Development & World Ecology · doi:10.1080/13504509.2021.1915406 · Cited by 22
Cited by
The world of plastic waste: A review
Nayanathara Thathsarani Pilapitiya, P. G. C., & Ratnayake, A. S. (2024) · Cleaner Materials · doi:10.1016/j.clema.2024.100220 · Cited by 1,034
Catalytic disconnection of C–O bonds in epoxy resins and composites
Ahrens, A., Bonde, A., Sun, H., Wittig, N. K., Hammershøj, H. C. D., Batista, G. M. F., Sommerfeldt, A., Frølich, S., Birkedal, H., & Skrydstrup, T. (2023) · Nature · doi:10.1038/s41586-023-05944-6 · Cited by 368
Catalytic Upcycling of Polyolefins
Sun, J., Dong, J., Gao, L., Zhao, Y.-Q., Moon, H., & Scott, S. L. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00943 · Cited by 317
Zabaniotou, A., & Vaskalis, I. (2023) · Energies · doi:10.3390/en16020593 · Cited by 29
Chasioti, A., & Zabaniotou, A. (2024) · Sustainability · doi:10.3390/su16145852 · Cited by 15
Metadata
- Authors
- Eze, W. U., Department of Polymer Technology, N. I. O. L. A. S. T., Umunakwe, R., Obasi, H. C., Ugbaja, M. I., Uche, C. C., Madufor, I. C., Department of Metallurgical and Material Engineering, F. U., Department of Polymer and Textile Engineering, S. O. E. A. E. T., & Department of Environmental Management, S. O. E. S.
- Venue
- Clean Technologies and Recycling
- Published
- 2021
- Volume
- 1
- Issue
- 1
- Pages
- 50-69
- ISSN
- 2770-4580 (ISSN-L)
- OpenAlex
- W3192804425
- Cited by
- 162
- References
- 8
- FWCI
- 6.72
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.