Dynamic Mechanical Properties and Thermal Stability of Poly(lactic Acid) and Poly(butylene Succinate) Blends Composites
The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
The blend of poly(lactic acid) (PLA) and poly(butylene succinate) (PBS) were prepared and extruded with various compositions and their molded properties were examined. Thermogravimetric analysis showed that thermal stability of the blends was higher than that of pure PLA and the weight loss of PLA/PBS (40/60 wt%) was lower than neat polymers. Difierential scanning calorimetry thermograms of blends indicated that the thermal properties of PLA did not change noticeably when blended with PBS. The tensile strength and modulus of blends decreased with the increasing PBS content. But impact strength has improved about two times compared to pure PLA. Rheological results revealed that the addition of 10% and 20% of PBS increased the storage modulus, loss modulus and viscosity of the blend at nearly all frequencies, and decreased viscosity with increasing shear stress. Dynamic mechanical properties results showed the lowering of storage modulus of all blended PLA which indicated the increase of molecular mobility by adding PBS due to lower glass transition.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Jain, R. A. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00115-0 · Cited by 2,214 · cited 1×
“Biodegradable PLA is perhaps the most important polyester in biomedical applications [9, 10].”
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360 · cited 1×
“PLA has attracted an increasing interest in various markets, such as packaging, textile [11-15], and automotive industries [16, 17].”
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767 · cited 1×
“Among a few commercially available biobased or partially biobased thermoplastic polymers, poly(lactic acid) (PLA) has been investigated extensively [2, 3].”
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607 · cited 1×
“It is a linear aliphatic thermoplastic polyester, produced from renewable resources with good biocompatibility, non-toxic byproducts, excellent transparency, and high strength and modulus [4-8].”
Structure and properties for biomass-based polyester blends of PLA and PBS
Yokohara, T., & Yamaguchi, M. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.01.008 · Cited by 439
New Polylactide/Layered Silicate Nanocomposites, 6
Sinha Ray, S., & Okamoto, M. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300156 · Cited by 333
Cited by
Items 101–125 of 125
Parida, S., Ashok, N., & Kurapati, R. (2025) · Materials Advances · doi:10.1039/d5ma00690b · Cited by 2
Hot‐Melt Adhesives from Renewable Resources
Utekar, P., Gabale, H., Khandelwal, A., & Mhaske, S. T. (2017) · Wiley eBooks · doi:10.1002/9781119407485.ch4 · Cited by 2
Biobased Polymers from Food Waste Feedstock and Their Synthesis
Cecchi, T. (2021) · Springer eBooks · doi:10.1007/978-3-030-63436-0_6 · Cited by 2
Melt Characteristics of Poly-Lactide (PLA) Natural Fibre-Composites
Akpan, E. I., Adeosun, S. O., Lawal, G. I., & Balogun, S. A. (2015) · Springer eBooks · doi:10.1007/978-3-319-48138-8_15 · Cited by 1
Karaca, A. E., Caggiano, A., & Barletta, M. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70911 · Cited by 1
Extruded films of bio-based plastics for packaging applications
Svidler, R., Hartmann, T., Buschbeck, S., & Rinberg, R. (2014) · Common Library Network (Der Gemeinsame Bibliotheksverbund) · Cited by 1
Improvement of Poly(Lactic Acid) Properties by Ethylene-Octene Copolymer and Organoclay
Wacharawichanant, S., Hanjai, P., Khongaio, S., & Phankokkruad, M. (2020) · Materials science forum · doi:10.4028/www.scientific.net/msf.1009.43 · Cited by 1
Lule, Z. C., Wondu, E., & Kim, J. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6167 · Cited by 1
Wiriya-Amornchai, A., Jittreetat, K., Champirom, M., & Hortha, S. (2023) · Materials science forum · doi:10.4028/p-f9ethk · Cited by 1
“Where ΔH m was the area of melting enthalpy (J/g) of each polymer, Δ H cc was the area of cold crystallization (J/g) of each polymer, Δ H m,100% was the melting enthalpy for complete crystalline polymer using from the literature (PLA about 97.3 J/g and PBS about 110.3 J/g [4]).”
BackgroundMethodInfluentialBio-Inspired Polymer-Polymer Hybrids for Medical ApplicationsPreprint
Demirci, G., Niedźwiedź, M., Kantor-Malujdy, N., & Fray, M. E. (2021) · Preprints.org · doi:10.20944/preprints202106.0026.v1 · Cited by 1
“7 100-224 [72][73][74] PGA physical 6900 68.”
Flame retardancy of polybutylene succinate by multiple approaches
Hu, C. (2018) · theses.fr (ABES) · doi:10.70675/eee109a5z8feaz4a91z84c9zce897a8f1750 · Cited by 1
Shojaeiarani, J. (2018) · NDSU Repository (North Dakota State University) · Cited by 2
Gregori, P. L. (2018) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/115935 · Cited by 2
Bio‐derived Polymers for Packaging
Kasemsiri, P., Pongsa, U., Okhawilai, M., Hızıroǧlu, S., Petchwattana, N., Kraisuwan, W., & Sukkaneewat, B. (2022) · Wiley eBooks · doi:10.1002/9781119655749.ch15
Melt Characteristics of Poly‐Lactide (PLA) Natural Fibre–Composites
Akpan, E. I., Adeosun, S. O., Lawal, G. I., & Balogun, S. A. (2015) · Wiley eBooks · doi:10.1002/9781119179856.ch15
Kathuria, A., Detyothin, S., Jaruwattanayon, W., Selke, S. E. M., & Auras, R. A. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch14 · Cited by 1
Stefens, J. L., Zehetmeyer, G., Araujo, D. R., Rasia, G. M., Gheller, J., Canavez, A. D. P. M., Vita, N. D. A., Saorin, F., Gonçalves, L. C., & dos Santos, M. P. P. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4674751
Jeong, Y.-D., Cho, H. J., Seo, M. J., & Kim, J. (2025) · Polymers · doi:10.3390/polym18010073
Kesarwani, A., Singh, C., & Singh, I. V. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70602
Masbernat, L. (2021) · theses.fr (ABES) · doi:10.70675/0307cb41z7749z4cc3z93a9za02ef1a375c8 · Cited by 6
Rubinstein, J. (2022) · theses.fr (ABES) · doi:10.70675/047b3f4dzb04ez4208zbab6zf10bb8566748 · Cited by 2
ポリエチレンカーボネート/ポリ乳酸ブレンドの物性および分解性評価
Ramlee, N. A. (2019) · Institutional Repositories DataBase (IRDB)
Lima, L. C. G., Caetano, D., Pinto, L. A., Pessan, L. A., & Backes, E. H. (2026) · Journal of Polymer Research · doi:10.1007/s10965-026-05004-3
“A comparable behavior was reported by Hassan et al. [40], who observed that the PLA/PBS showed lower thermal stability, which may be attributed to the thermal stability of PBS.”
Metadata
- Authors
- Hassan, E., Wei, Y., null, H. J., & Muhuo, Y.
- Affiliations
- Donghua University (CN)
- Corresponding author
- Hassan, Elwathig
- Venue
- Journal of Fiber Bioengineering and Informatics
- Published
- 2013-06
- Volume
- 6
- Issue
- 1
- Pages
- 85-94
- ISSN
- 1940-8676 (ISSN-L)
- 2617-8699
- OpenAlex
- W2099509921
- Cited by
- 124
- References
- 36
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 5 · 2023: 10 · 2022: 10 · 2021: 17 · 2020: 8 · 2019: 18 · 2018: 18 · 2017: 9 · 2016: 8 · 2015: 8 · 2014: 4
- FWCI
- 2.54
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Fiber Bioengineering and Informatics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- polylactic acid, poly(butylene succinate), polymer blends, biodegradable plastics, thermal stability, dynamic mechanical properties, impact strength, tensile strength, rheology, glass transition, molecular mobility, extrusion molding
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.