Dynamic Mechanical Properties and Thermal Stability of Poly(lactic Acid) and Poly(butylene Succinate) Blends Composites
The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
The blend of poly(lactic acid) (PLA) and poly(butylene succinate) (PBS) were prepared and extruded with various compositions and their molded properties were examined. Thermogravimetric analysis showed that thermal stability of the blends was higher than that of pure PLA and the weight loss of PLA/PBS (40/60 wt%) was lower than neat polymers. Difierential scanning calorimetry thermograms of blends indicated that the thermal properties of PLA did not change noticeably when blended with PBS. The tensile strength and modulus of blends decreased with the increasing PBS content. But impact strength has improved about two times compared to pure PLA. Rheological results revealed that the addition of 10% and 20% of PBS increased the storage modulus, loss modulus and viscosity of the blend at nearly all frequencies, and decreased viscosity with increasing shear stress. Dynamic mechanical properties results showed the lowering of storage modulus of all blended PLA which indicated the increase of molecular mobility by adding PBS due to lower glass transition.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Jain, R. A. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00115-0 · Cited by 2,214 · cited 1×
“Biodegradable PLA is perhaps the most important polyester in biomedical applications [9, 10].”
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360 · cited 1×
“PLA has attracted an increasing interest in various markets, such as packaging, textile [11-15], and automotive industries [16, 17].”
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767 · cited 1×
“Among a few commercially available biobased or partially biobased thermoplastic polymers, poly(lactic acid) (PLA) has been investigated extensively [2, 3].”
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607 · cited 1×
“It is a linear aliphatic thermoplastic polyester, produced from renewable resources with good biocompatibility, non-toxic byproducts, excellent transparency, and high strength and modulus [4-8].”
Structure and properties for biomass-based polyester blends of PLA and PBS
Yokohara, T., & Yamaguchi, M. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.01.008 · Cited by 439
New Polylactide/Layered Silicate Nanocomposites, 6
Sinha Ray, S., & Okamoto, M. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300156 · Cited by 333
Strengthening blends of poly(lactic acid) and starch with methylenediphenyl diisocyanate
Wang, H., Sun, X., & Seib, P. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2018 · Cited by 279
Bhatia, A., Gupta, R. K., Bhattacharya, S. N., & Choi, H. J. (2007) · RMIT Research Repository (RMIT University Library) · Cited by 272
Toughening modification of PLLA/PBS blends via in situ compatibilization
Wang, R., Wang, S., Zhang, Y., Wan, C., & Ma, P. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21210 · Cited by 266 · cited 1×
“It is a linear aliphatic thermoplastic polyester, produced from renewable resources with good biocompatibility, non-toxic byproducts, excellent transparency, and high strength and modulus [4-8].”
Harada, M., Ohya, T., Iida, K., Hayashi, H., Hirano, K., & Fukuda, H. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26717 · Cited by 254 · cited 1×
“Although many reports about PLA/PBS blends are reported in literature [27-31], the results have shown that the PLA/PBS blends that with 20 wt% of PBS has good compatibility.”
Phase behavior and morphology in blends of poly(L‐lactic acid) and poly(butylene succinate)
Park, J. W., & Im, S. S. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10923 · Cited by 240 · cited 1×
“Although many reports about PLA/PBS blends are reported in literature [27-31], the results have shown that the PLA/PBS blends that with 20 wt% of PBS has good compatibility.”
Polylactide‐pine wood flour composites
Pilla, S., Gong, S., O'Neill, E., Rowell, R. M., & Krzysik, A. M. (2008) · Polymer Engineering & Science · doi:10.1002/pen.20971 · Cited by 188
Mechanical Properties of Natural Fibre Mat Reinforced Thermoplastic
Oksman, K. (2000) · Applied Composite Materials · doi:10.1023/a:1026546426764 · Cited by 182
Preparation and properties of absorbable fibres from l-lactide copolymers
Penning, J. P., Dijkstra, H., & Pennings, A. J. (1993) · Polymer · doi:10.1016/0032-3861(93)90212-s · Cited by 168 · cited 1×
“PLA has attracted an increasing interest in various markets, such as packaging, textile [11-15], and automotive industries [16, 17].”
Poly(lactide) nanofibers produced by a melt‐electrospinning system with a laser melting device
Ogata, N., Yamaguchi, S., Shimada, N., Lu, G., Iwata, T., Nakane, K., & Ogihara, T. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25782 · Cited by 151 · cited 1×
“PLA has attracted an increasing interest in various markets, such as packaging, textile [11-15], and automotive industries [16, 17].”
Improvement of impact fracture properties of PLA/PCL polymer blend due to LTI addition
Takayama, T., & Todo, M. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-0137-1 · Cited by 149 · cited 1×
“Many reports about blending of PLA with ductile polymers are available [24-26].”
Vilay, V., Mariatti, M., Ahmad, Z., Pasomsouk, K., & Todo, M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30683 · Cited by 129 · cited 1×
“Many reports about blending of PLA with ductile polymers are available [24-26].”
Lee, S.-M., & Lee, J. W. (2005) · Cited by 128
Tsuji, H., Mizuno, A., & Ikada, Y. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19981212)70:11<2259::aid-app20>3.0.co;2-j · Cited by 126 · cited 1×
“Many reports about blending of PLA with ductile polymers are available [24-26].”
Mechanical and thermal properties of poly(lactic acid)/starch blends with dioctyl maleate
Zhang, J., & Sun, X. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21078 · Cited by 107
Effects of hydrophilic fillers on the thermal degradation of poly(lactic acid)
Liu, X., Khor, S., Petinakis, E., Yu, L. F., Simon, G. P., Dean, K., & Bateman, S. A. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2010.06.015 · Cited by 82
Gupta, B., Revagade, N., Anjum, N., Atthoff, B., & Hilborn, J. G. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23497 · Cited by 82 · cited 1×
“PLA has attracted an increasing interest in various markets, such as packaging, textile [11-15], and automotive industries [16, 17].”
Melt Rheology of Poly(Lactic Acid)/Low Density Polyethylene Polymer Blends
Hamad, K., Kaseem, M., & Deri, F. (2011) · Advances in Chemical Engineering and Science · doi:10.4236/aces.2011.14030 · Cited by 72 · cited 1×
“The high viscosity at a low shear rate provided the integrity of the product during extrusion, and the low viscosity at a high shear rate enables low injection pressure, high injection speed and less time of the injection cycle [38].”
FABRICATION OF HIBISCUS SABDARIFFA FIBRE REINFORCED POLYMER COMPOSITES
Singha, A. S., & Thakur, V. K. (2008) · Cited by 70
Finkenstadt, V. L., Liu, C., Cooke, P. H., Liu, L., & Willett, J. L. (2008) · Journal of Polymers and the Environment · doi:10.1007/s10924-008-0085-8 · Cited by 66 · cited 1×
“The lower G′ of the blends is supposed to be originated from the decrease in molecular entanglements in the blends [37].”
Blom, H. P., Teh, J. W., & Rudin, A. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19981212)70:11<2081::aid-app2>3.0.co;2-4 · Cited by 37
Vannaladsaysy, V., Todo, M., Takayama, T., Mariatti, M., Ahmad, Z., & Pasomsouk, K. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3428-5 · Cited by 36 · cited 1×
“Although many reports about PLA/PBS blends are reported in literature [27-31], the results have shown that the PLA/PBS blends that with 20 wt% of PBS has good compatibility.”
Electric field analysis of spinneret design for needleless electrospinning of nanofibers
Wang, X., Wang, X., & Lin, T. (2012) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2012.346 · Cited by 34 · cited 1×
“Morphology and the mechanical properties of electrospun PA 6/66 nanofibers and the electric field analysis of spinneret design for needleless electrospinning of nanofibers were also investigated [34, 35].”
MethodSynthesis and characterization of wool keratin/hydroxyapatite nanocomposite
Li, J., Liu, X., Zhang, J., Zhang, Y., Han, Y., Hu, J., & Li, Y. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32645 · Cited by 34 · cited 1×
“, discussed the properties biocompatible fibers obtained by blending the cellulose nanowhiskers and the cellulose matrix, and latter the characteristics of wool/keratin hydroxyapatite were also investigated [32, 33].”
Wang, L. (2008) · Journal of Fiber Bioengineering and Informatics · doi:10.3993/jfbi06200807 · Cited by 12 · cited 1×
“Morphology and the mechanical properties of electrospun PA 6/66 nanofibers and the electric field analysis of spinneret design for needleless electrospinning of nanofibers were also investigated [34, 35].”
MethodProperties of Biocomposite Fibers from Cellulose Nanowhiskers and Cellulose Matrix
null, L. L., & Yao, J.-M. (2012) · Journal of Fiber Bioengineering and Informatics · doi:10.3993/jfbi06201209 · Cited by 12 · cited 1×
“, discussed the properties biocompatible fibers obtained by blending the cellulose nanowhiskers and the cellulose matrix, and latter the characteristics of wool/keratin hydroxyapatite were also investigated [32, 33].”
Effect of hot drawing on properties of wet‐spun poly( L,D ‐lactide) copolymer multifilament fibers
Rissanen, M., Puolakka, A., Hukka, T. I., Ellä, V., Kellomäki, M., & Nousiainen, P. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.31015 · Cited by 5 · cited 1×
“PLA has attracted an increasing interest in various markets, such as packaging, textile [11-15], and automotive industries [16, 17].”
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e · cited 1×
“It is a linear aliphatic thermoplastic polyester, produced from renewable resources with good biocompatibility, non-toxic byproducts, excellent transparency, and high strength and modulus [4-8].”
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Poly(butylene succinate) (PBS): Materials, processing, and industrial applications
Barletta, M., Aversa, C., Ayyoob, M., Gisario, A., Hamad, K., Mehrpouya, M., & Vahabi, H. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101579 · Cited by 443
A Review on Properties and Application of Bio-Based Poly(Butylene Succinate)
Rafiqah, S. A., Khalina, A., Harmaen, A. S., Tawakkal, I. A., Zaman, K., Asim, M., Nurrazi, M. N., & Lee, C. H. (2021) · Polymers · doi:10.3390/polym13091436 · Cited by 398
Blending poly(butylene succinate) with poly(lactic acid): Ductility and phase inversion effects
Deng, Y., & Thomas, N. L. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.08.029 · Cited by 191
“Hassan et al [13] found that strain-to-break of PLA/PBS blends increased gradually with increasing PBS content, although high ductilities were only reached at PBS levels in excess of 80 weight %.”
Background
Metadata
- Authors
- Hassan, E., Wei, Y., null, H. J., & Muhuo, Y.
- Affiliations
- Donghua University (CN)
- Corresponding author
- Hassan, Elwathig
- Venue
- Journal of Fiber Bioengineering and Informatics
- Published
- 2013-06
- Volume
- 6
- Issue
- 1
- Pages
- 85-94
- ISSN
- 1940-8676 (ISSN-L)
- 2617-8699
- OpenAlex
- W2099509921
- Cited by
- 124
- References
- 36
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 5 · 2023: 10 · 2022: 10 · 2021: 17 · 2020: 8 · 2019: 18 · 2018: 18 · 2017: 9 · 2016: 8 · 2015: 8 · 2014: 4
- FWCI
- 2.54
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Fiber Bioengineering and Informatics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- polylactic acid, poly(butylene succinate), polymer blends, biodegradable plastics, thermal stability, dynamic mechanical properties, impact strength, tensile strength, rheology, glass transition, molecular mobility, extrusion molding
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.