KCl-Induced High Temperature Corrosion of the Austenitic Stainless Steel 304L – The Influence of SO2
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The effect of SO 2 on the oxidation of alloy 304L in O 2+H 2 O and O 2+H 2 O+KCl environment has been investigated at 600°C. Exposure time was 1-168 hours. The exposed samples were analyzed by SEM/EDX, XRD and IC. In dry O 2, a protective and chromium-rich corundum-type oxide forms. In the presence of H 2 O(g), chromium is volatilized in the form of CrO 2(OH)2(g). The corresponding chromium depletion of the protective oxide triggers a partial loss of protective properties resulting in the formation of oxide islands on the alloy grain centers. The oxide islands consist of an outward growing hematite layer and an inward growing FeCrNi spinel layer. By coating the samples with KCl the chromia depletion of the protective oxide dramatically increases due to the formation of K 2 CrO 4. This leads to breakaway corrosion, a rapidly growing scale forming all over the surface. The resulting thick scale has a similar structure as the oxide islands formed in the absence of KCl. The addition of 300 ppm SO 2 to the O 2+H 2 O and O 2+H 2 O+KCl environments results in a drastic reduction of corrosion rate. In O 2+H 2 O environment the effect of SO 2 is attributed to the formation of a thin sulphate film on the oxide surface that impedes chromium volatilization and decreases the rate of oxygen reduction on the oxide surface. In O 2+H 2 O+KCl environment the corrosion mitigating effect of SO 2 is mainly attributed to the rapid conversion of KCl to K 2 SO 4. In contrast to KCl, K 2 SO 4 does not deplete the protective oxide in chromium by forming K 2 CrO 4.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Asteman, H., Svensson, J.-E., Norell, M., & Johansson, L.-G. (2000) · Oxidation of Metals · doi:10.1023/a:1004642310974 · Cited by 325
Self-citationKCl Induced Corrosion of a 304-type Austenitic Stainless Steel at 600°C; The Role of Potassium
Pettersson, J., Asteman, H., Svensson, J. E., & Johansson, L. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-005-5704-3 · Cited by 182
Self-citationHalvarsson, M., Tang, J. E., Asteman, H., Svensson, J.-E., & Johansson, L.-G. (2006) · Corrosion Science · doi:10.1016/j.corsci.2005.08.012 · Cited by 146 · cited 2×
“The thick scale corresponding to the “islands” consists of an outer hematite (Fe2O3) and inner (inward-growing) spinel-type ((FeCrNi)3O4) layer [4].”
BackgroundSelf-citationJonsson, T., Froitzheim, J., Pettersson, J., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M. (2009) · Oxidation of Metals · doi:10.1007/s11085-009-9156-z · Cited by 76 · cited 1×
“The resulting scale is reported to be duplex, consisting of an outer hematite layer and a (FeCrNi) spinel type oxide at the bottom[8].”
BackgroundSelf-citationThe Influence of Sulfur Additions on the Corrosive Environments in a Waste-Fired CFB Boiler
Pettersson, J., Pettersson, C., Folkeson, N., Johansson, L. G., Skog, E., & Svensson, J. E. (2006) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.522-523.563 · Cited by 31
Self-citation
Cited by
Karlsson, S., Åmand, L.-E., & Liske, J. (2015) · Fuel · doi:10.1016/j.fuel.2014.09.007 · Cited by 79
“This has been shown in both laboratory exposures [18,39,40] as well as in field exposures by using elemental S, S-rich additives or by co-combustion with a suitable S-rich fuel [15,22,23,26–29].”
BackgroundMethodSelf-citationCorrosion Problems in Incinerators and Biomass-Fuel-Fired Boilers
Mudgal, D., Singh, S., & Prakash, S. (2014) · International Journal of Corrosion · doi:10.1155/2014/505306 · Cited by 56
Phother-Simon, J., Hanif, I., Liske, J., & Jonsson, T. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109315 · Cited by 37
“rapid breakaway oxidation of the primary oxide scale formed on the stainless steel 304 L and that the protection is dominated by the secondary protection regime [12,18,59,60].”
BackgroundOkoro, S. C., Kiamehr, S., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2017) · Materials and Corrosion · doi:10.1002/maco.201609173 · Cited by 27
High temperature corrosion memory in a waste fired boiler – Influence of sulfur
Paz, M. D., Phother-Simon, J., Andersson, S., & Jonsson, T. (2021) · Waste Management · doi:10.1016/j.wasman.2021.05.005 · Cited by 17
Metadata
- Authors
- Karlsson, S., Pettersson, J., Svensson, J. E., & Johansson, L. G.
- Venue
- Materials Science Forum
- Publisher
- Trans Tech Publications, Ltd.
- Published
- 2011-09
- Volume
- 696
- Pages
- 224-229
- ISSN
- 0255-5476 (ISSN-L)
- 1662-9752
- OpenAlex
- W2053421554
- Cited by
- 20
- References
- 5
- FWCI
- 2.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: KCl-Induced High Temperature Corrosion of the Austenitic Stainless Steel 304L – The Influence of SO2. https://app.cochat.ai/papers/10.4028/www.scientific.net/msf.696.224
- The paper
- Karlsson, S., Pettersson, J., Svensson, J. E., & Johansson, L. G. (2011). KCl-Induced High Temperature Corrosion of the Austenitic Stainless Steel 304L – The Influence of SO2. Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.696.224
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.