CoChat

Simplified Elasto-Hydrodynamic Friction Model of the Cam-Tappet Contact

Teodorescu, Mircea, Taraza, Dinu, Henein, Naeim A., Bryzik, Walter · 2003 · SAE Technical Paper Series

The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.

Abstract

The paper analyses the particularities of the lubricating conditions at the contact between the cam and a flat tappet in the valve train of an internal combustion engine and develops a method for the calculation of the friction force. The existing lubrication models show the predominance of the entraining speed and oil viscosity on the thickness of the oil film entrapped between cam and tappet, predicting a very small value (less than 0.1 μm) of the oil film thickness (OFT). The oil viscosity increases exponentially with pressure in the Hertzian contact, determining non-Newtonian behavior of the oil in the contact zone. Using the model developed by Greenwood and Tripp [11] for the contact of two rough surfaces and the Eyring model [2] for the oil it is shown that non-Newtonian behavior of the oil prevails and that the OFT plays a secondary role on the friction force. The simplified friction model developed according to these assumptions is experimentally validated by measurements made on a single cylinder diesel engine. An original technique was developed to permit the measurement of the friction forces on the tappet. This technique is based on a modified design of the tappet, which is equipped with strain gauges that measure the forces and moments applied on the tappet. The processing of the measured data permits to evaluate the friction force cam-tappet and tappet-bore and, to determine the angular rotation of the tappet.

Overview

Integrity signals

Registry

Crossref · 10.4271/2003-01-0985

Cites

15 of 15 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 15 references

Cited by

See all 67

Metadata

Authors
Teodorescu, M., Taraza, D., Henein, N. A., & Bryzik, W.
Affiliations
  • Wayne State University (US)
  • United States Department of the Army (US)
Venue
SAE Technical Paper Series
Published
2003-03-03
Volume
1
ISSN
  • 0148-7191 (ISSN-L)
  • 2688-3627
OpenAlex
W2279574349
Cited by
59
References
15
Citations by year
2026: 1 · 2024: 3 · 2022: 3 · 2021: 6 · 2020: 2 · 2019: 6 · 2018: 4 · 2017: 1 · 2016: 2 · 2015: 2 · 2014: 5 · 2013: 3 · 2012: 2
FWCI
4.19
Type
conference paper
Language
en
Open access
closed
Locations
SAE technical papers on CD-ROM/SAE technical paper series (publishedVersion)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
  • Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
  • Physical Sciences › Engineering › Mechanical Engineering › Electrical Contact Performance and Analysis
Keywords
elastohydrodynamic lubrication, friction force, valve train, internal combustion engines, oil film thickness, Eyring model, diesel engines

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.