Simplified Elasto-Hydrodynamic Friction Model of the Cam-Tappet Contact
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
The paper analyses the particularities of the lubricating conditions at the contact between the cam and a flat tappet in the valve train of an internal combustion engine and develops a method for the calculation of the friction force. The existing lubrication models show the predominance of the entraining speed and oil viscosity on the thickness of the oil film entrapped between cam and tappet, predicting a very small value (less than 0.1 μm) of the oil film thickness (OFT). The oil viscosity increases exponentially with pressure in the Hertzian contact, determining non-Newtonian behavior of the oil in the contact zone. Using the model developed by Greenwood and Tripp [11] for the contact of two rough surfaces and the Eyring model [2] for the oil it is shown that non-Newtonian behavior of the oil prevails and that the OFT plays a secondary role on the friction force. The simplified friction model developed according to these assumptions is experimentally validated by measurements made on a single cylinder diesel engine. An original technique was developed to permit the measurement of the friction forces on the tappet. This technique is based on a modified design of the tappet, which is equipped with strain gauges that measure the forces and moments applied on the tappet. The processing of the measured data permits to evaluate the friction force cam-tappet and tappet-bore and, to determine the angular rotation of the tappet.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
The Contact of Two Nominally Flat Rough Surfaces
Greenwood, J. A., & Tripp, J. H. (1970) · Proceedings of the Institution of Mechanical Engineers · doi:10.1243/pime_proc_1970_185_069_02 · Cited by 1,754
The Rheological Properties of Elastohydrodynamic Lubricants
Evans, C. R., & Johnson, K. L. (1986) · Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science · doi:10.1243/pime_proc_1986_200_134_02 · Cited by 243
Dowson, D., & Higginson, G. R. (1977) · Elsevier eBooks · doi:10.1016/b978-0-08-021302-6.50012-6 · Cited by 122
An Analysis of Valve Train Friction in Terms of Lubrication Principles
Staron, J. T., & Willermet, P. A. (1983) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/830165 · Cited by 103
Experimental Analysis of Dynamics and Friction in Valve Train Systems
Teodorescu, M., Taraza, D., Henein, N. A., & Bryzik, W. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-0484 · Cited by 33
Self-citationA Valve Train Friction and Lubrication Analysis Model and Its Application in a Cam/Tappet Wear Study
Yang, L., Ito, A., & Negishi, H. (1996) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/962030 · Cited by 27
A Process to Predict Friction in an Automotive Valve Train
Crane, M. E., & Meyer, R. C. (1990) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/901728 · Cited by 26
Dynamic Friction in Cam/Tappet Lubrication
van Helden, A. K., van der Meer, R. J., van Staaden, J. J., & van Gelderen, E. (1985) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/850441 · Cited by 25
Simulation and Observation of Transient Effects in Elastohydrodynamic Lubrication
Scales, L. E., Rycroft, J. E., Horswill, N. R., & Williamson, B. P. (1996) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/961143 · Cited by 24
Pieprzak, J. M., Willermet, P. A., & Dailey, D. P. (1990) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/902086 · Cited by 20
Cited by
Styles, G., Rahmani, R., Rahnejat, H., & Fitzsimons, B. (2014) · International Journal of Engine Research · doi:10.1177/1468087413519783 · Cited by 106
Rahmani, R., Theodossiades, S., Rahnejat, H., & Fitzsimons, B. (2012) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/1350650111431028 · Cited by 103
A New Tool to Perform Global Energy Balances in DI Diesel Engines
Payri, F., Olmeda, P., Martín, J., & Carreño, R. (2014) · SAE International Journal of Engines · doi:10.4271/2014-01-0665 · Cited by 97
On the dynamics of lubricated hypoid gears
Karagiannis, I., Theodossiades, S., & Rahnejat, H. (2011) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2011.08.012 · Cited by 74
An investigation of manual transmission drive rattle
la Cruz, M. D., Theodossiades, S., & Rahnejat, H. (2009) · Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics · doi:10.1243/14644193jmbd232 · Cited by 74
Transient mixed thermo-elastohydrodynamic lubrication in multi-speed transmissions
la Cruz, M. D., Chong, W. W. F., Teodorescu, M., Theodossiades, S., & Rahnejat, H. (2011) · Tribology International · doi:10.1016/j.triboint.2011.12.006 · Cited by 70
Self-citationMohammadpour, M., Theodossiades, S., Rahnejat, H., & Kelly, P. C. (2013) · Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics · doi:10.1177/1464419313496559 · Cited by 68
Investigation of dynamic characteristics of a valve train system
Guo, J. Q., Zhang, W., & Zou, D. (2011) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2011.07.014 · Cited by 67
Cavitation induced starvation for piston-ring/liner tribological conjunction
Chong, W. W. F., Teodorescu, M., & Vaughan, N. D. (2010) · Tribology International · doi:10.1016/j.triboint.2010.12.008 · Cited by 63
Self-citationIntegrated Tribological Analysis within a Multi- physics Approach to System Dynamics
Teodorescu, M., Balakrishnan, S., & Rahnejat, H. (2005) · Tribology & interface engineering/Tribology and interface engineering · doi:10.1016/s0167-8922(05)80074-4 · Cited by 62
Self-citationMulti-physics analysis of valve train systems: From system level to microscale interactions
Teodorescu, M., Kushwaha, M., Rahnejat, H., & Rothberg, S. (2007) · Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics · doi:10.1243/14644193jmbd77 · Cited by 45
Self-citationElastodynamic transient analysis of a four-cylinder valvetrain system with camshaft flexibility
Teodorescu, M., Kushwaha, M., Rahnejat, H., & Taraza, D. (2005) · Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics · doi:10.1243/146441905x9962 · Cited by 41
Self-citationModelling Transitions in Regimes of Lubrication for Rough Surface Contact
Chong, W. W. F., Hamdan, S. H., Wong, K. J., & Yusup, S. B. (2019) · Lubricants · doi:10.3390/lubricants7090077 · Cited by 40
Application of Tribological Artificial Neural Networks in Machine Elements
Walker, J., Questa, H., Raman, A., Ahmed, M., Mohammadpour, M., Bewsher, S. R., & Offner, G. (2023) · Tribology Letters · doi:10.1007/s11249-022-01673-5 · Cited by 39
“F 5 ∕ 2 ( 𝜆 ) and F 2 ( 𝜆 ) are statistical functions dependent upon the Stribeck Oil Parameter 𝜆 , which can be approximated by polynomial curve fitting [37].”
MethodNon-Newtonian mixed elastohydrodynamics of differential hypoid gears at high loads
Mohammadpour, M., Theodossiades, S., Rahnejat, H., & Saunders, T. (2014) · Meccanica · doi:10.1007/s11012-013-9857-x · Cited by 38
Tormos, B., Martín, J., Carreño, R., & Ramírez, L. (2018) · Tribology International · doi:10.1016/j.triboint.2018.03.007 · Cited by 37
Calabretta, M., Cacciatore, D., & Carden, P. (2010) · SAE International Journal of Engines · doi:10.4271/2010-01-1492 · Cited by 33
Combined lubricant–surface system perspective: Multi-scale numerical–experimental investigation
Leighton, M., Nicholls, T., la Cruz, M. D., Rahmani, R., & Rahnejat, H. (2016) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/1350650116683784 · Cited by 31
Prölß, M., Schwarze, H., Hagemann, T., Zemella, P., & Winking, P. (2018) · Lubricants · doi:10.3390/lubricants6040105 · Cited by 31
Jounce and Impact in Cam-Tappet Conjunction Induced by the Elastodynamics of Valve train System
Teodorescu, M., Votsios, V., Rahnejat, H., & Taraza, D. (2006) · Meccanica · doi:10.1007/s11012-005-1609-0 · Cited by 26
Self-citationThe influence of inter-ring pressures on piston-ring/liner tribological conjunction
Chong, W., Howell-Smith, S., Teodorescu, M., & Vaughan, N. (2012) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/1350650112461579 · Cited by 25
Self-citationFriction and lubrication in diesel engine system design
Xin, Q. (2011) · Elsevier eBooks · doi:10.1533/9780857090836.3.651 · Cited by 24
Mathematical modelling of layered contact mechanics of cam–tappet conjunction
Teodorescu, M., & Rahnejat, H. (2006) · Applied Mathematical Modelling · doi:10.1016/j.apm.2006.10.019 · Cited by 24
Self-citationModeling and Analysis of Valve Train, Part I - Conventional Systems
Beloiu, D. M. (2010) · SAE International Journal of Engines · doi:10.4271/2010-01-1198 · Cited by 22
Baker, C., Rahmani, R., Theodossiades, S., Rahnejat, H., & Fitzsimons, B. (2014) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4028496 · Cited by 21
Cavalieri, F. J., Luengo, C., Risso, J., Zenklusen, F., & Cardona, A. (2014) · Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering · doi:10.1177/0954407013498862 · Cited by 20
Dynamic and exciting analysis with modal characteristics for valve train using a flexible model
Guo, J. Q., Zhang, W., Zhang, X., & Cao, Y. (2014) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2014.03.012 · Cited by 19
Tormos, B., Martín, J., Blanco-Cavero, D., & Jiménez-Reyes, A. J. (2019) · Journal of Tribology · doi:10.1115/1.4044856 · Cited by 19
Macián, V., Tormos, B., Bermúdez, V., & Bastidas, S. (2021) · Tribology International · doi:10.1016/j.triboint.2021.107034 · Cited by 18
Orgeldinger, C., & Tremmel, S. (2021) · Lubricants · doi:10.3390/lubricants9110106 · Cited by 18
Payri, F., López, J. J., Martín, J., & Carreño, R. (2018) · Energy · doi:10.1016/j.energy.2018.03.118 · Cited by 18
Teodorescu, M., & Taraza, D. (2004) · Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics · doi:10.1243/1464419042035935 · Cited by 17
Self-citationEngine Friction Model for Transient Operation of Turbocharged, Common Rail Diesel Engines
Taraza, D., Henein, N. A., Ceausu, R., & Bryzik, W. (2007) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2007-01-1460 · Cited by 15
Self-citationZavos, A., & Nikolakopoulos, P. G. (2021) · Tribology - Materials Surfaces & Interfaces · doi:10.1080/17515831.2021.1907682 · Cited by 14
Abril, S. O., Rojas, J. P., & Solano, É. N. F. (2020) · Lubricants · doi:10.3390/lubricants8120103 · Cited by 12
Popovic, S., & Tomic, M. (2013) · Thermal Science · doi:10.2298/tsci120907006p · Cited by 11
Modeling and analysis of the transient vibration of camshaft in multi-cylinder diesel engine
Guo, J. Q., Zhang, W., & Zhang, X. (2015) · Advances in Mechanical Engineering · doi:10.1177/1687814015616087 · Cited by 9
Lozano, W. O., Vigoya, M. F., & León, J. A. P. (2021) · Lubricants · doi:10.3390/lubricants9120116 · Cited by 9
Complex Diesel Engine Simulation with Focus on Transient Operation
Taraza, D., Henein, N. A., Ceausu, R., & Bryzik, W. (2008) · Energy & Fuels · doi:10.1021/ef700472x · Cited by 9
Self-citationDevelopment and validation of a rigid–flexible coupled dynamic valve-train model
Guo, J., Zhang, W. P., & Zou, D. Q. (2011) · Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering · doi:10.1177/0954407011413973 · Cited by 9
Siddiqui, M. R., Ali, M. A., Mufti, R. A., Aslam, J., Bhutta, M. U., Zahid, R., & Khurram, M. (2024) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/13506501241266116 · Cited by 7
Design Optimization Study of a Nonlinear Energy Absorber for Internal Combustion Engine Pistons
Dolatabadi, N., Theodossiades, S., & Rothberg, S. (2018) · Journal of Computational and Nonlinear Dynamics · doi:10.1115/1.4040239 · Cited by 6
Guo, J. Q., Cao, Y., Zhang, W., & Zhang, X. (2016) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4032715 · Cited by 6
Analysis of dynamics and friction resistance in the cam-tappet system
Siczek, K. J., & Stefański, A. (2019) · Journal of Theoretical and Applied Mechanics/Mechanika Teoretyczna i Stosowana · doi:10.15632/jtam-pl.57.1.273 · Cited by 6
Nikolakopoulos, P. G., Antonakakis, G., & Zavos, A. (2022) · Tribology - Materials Surfaces & Interfaces · doi:10.1080/17515831.2022.2111045 · Cited by 5
Multi-body engine simulation including elastohydrodynamic lubrication for non-conformal conjunctions
Meuter, M., Offner, G., & Haase, G. (2017) · Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics · doi:10.1177/1464419317714937 · Cited by 5
A New Numerical Method for Developing the Lumped Dynamic Model of Valve Train
Guo, J. Q., Cao, Y., Zhang, W., & Zhang, X. (2015) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4030093 · Cited by 5
A multi-scale approach to analysis of valve train systems
Teodorescu, M. (2010) · Elsevier eBooks · doi:10.1533/9781845699932.2.567 · Cited by 4
Self-citationPrediction of thrust bearing’s performance in Mixed Lubrication regime
Katsaros, K. P., & Nikolakopoulos, P. G. (2024) · Integrated Computer-Aided Engineering · doi:10.3233/ica-240737 · Cited by 3
Sophia, K. (2021) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/172188 · Cited by 3
Thermo-elastohydrodynamics of hypoid gears with formulated lubricants
Paouris, L. I. (2016) · doi:10.12681/eadd/59791 · Cited by 3
Chen, W., Liu, D., & Xu, J. (2024) · Lubrication Science · doi:10.1002/ls.1680 · Cited by 2
On Limiting Shear Stress-Based Friction Modeling Under Boundary Lubrication
Fome, A. T., Kelley, J., Terwey, J. T., Pape, F., Poll, G., & Marian, M. (2026) · Lubricants · doi:10.3390/lubricants14030125 · Cited by 2
Pagnoux, G. (2015) · theses.fr (ABES) · doi:10.70675/5cade07az0d76z43fdz96e1ze05f645540bf · Cited by 1
Diez-Ibarbia, A. (2016) · Tesis Doctorals en Xarxa (Consorci de Serveis Universitaris de Catalunya) · Cited by 1
Multi-scale friction modelling of lubricant-surface interaction in tribological contacts
Hamdan, S. H. (2018) · ePrints Soton (University of Southampton) · Cited by 1
Ratamero, L. D. A. (2019) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.3.2019.tde-05112020-145106 · Cited by 1
Simulation of dry and lubricated contacts in multi-body systems
Quetel, É., Müllers, J., Coutellier, D., & Hinterkausen, M. (2008) · Mécanique & Industries · doi:10.1051/meca:2008016
The effect of oil properties on engine oil pump failure mechanisms
Salehi, F. M. (2016) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York)
TRIBOLOGICAL ANALYSIS ON THE EFFECT OF HEAT TRANSFER TOWARDS ENGINE IN-CYLINDER FRICTION
Fong, J., & Chong, W. W. F. (2019) · Journal of Transport System Engineering
Predictive tool for frictional performance of piston ring-pack/liner conjunction
Tee, J. W., Hamdan, S. H., & Chong, W. W. F. (2019) · JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES · doi:10.15282/jmes.13.3.2019.19.0445
Performance prediction and experimental study of variable displacement vane oil pump
He, S. H., Liu, X., Xiao, S., Liu, G., & Cai, H. (2020) · The Journal of Engineering · doi:10.1049/joe.2020.0047
Engine Friction Optimization Approach using Multibody Simulations
Mane, P. R., Ortlieb, P., Sonnen, S., Emran, A., & Sharma, V. K. (2021) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2021-26-0409
Assessment of the finger contact surface to promote the spin motion in finger follower mechanisms
Battarra, M., & Mucchi, E. (2022) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2022.105087
Tribo-elastodynamics in the prediction of high-performance transmission efficiency
Elisaus, V. (2019) · Loughborough University Research Repository (Loughborough University) · doi:10.26174/thesis.lboro.8312513
Modelado de las pérdidas mecánicas en motores Diesel de inyección directa
Ronda González, J. M. (2018) · RiuNet (Universitat Politècnica de València)
Tribology of advanced materials in automotive applications
Manoj, A., Ali, A., & Sahdev, R. K. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-40592-1.00001-1
Metadata
- Authors
- Teodorescu, M., Taraza, D., Henein, N. A., & Bryzik, W.
- Affiliations
- Wayne State University (US)
- United States Department of the Army (US)
- ORCID
- Teodorescu, Mircea
- Venue
- SAE Technical Paper Series
- Publisher
- SAE International
- Published
- 2003-03-03
- Volume
- 1
- ISSN
- 0148-7191 (ISSN-L)
- 2688-3627
- OpenAlex
- W2279574349
- Cited by
- 59
- References
- 15
- Citations by year
- 2026: 1 · 2024: 3 · 2022: 3 · 2021: 6 · 2020: 2 · 2019: 6 · 2018: 4 · 2017: 1 · 2016: 2 · 2015: 2 · 2014: 5 · 2013: 3 · 2012: 2
- FWCI
- 4.19
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- SAE technical papers on CD-ROM/SAE technical paper series (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Physical Sciences › Engineering › Mechanical Engineering › Electrical Contact Performance and Analysis
- Keywords
- elastohydrodynamic lubrication, friction force, valve train, internal combustion engines, oil film thickness, Eyring model, diesel engines
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.