The Rheological Properties of Elastohydrodynamic Lubricants
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
The methods of measuring the rheological properties of EHD lubricants are reviewed, but for pressures in excess of 1.0 GPa there is currently no simple alternative to the disc machine. A technique has been developed which enables disc machine traction tests to be carried out at constant mean film temperature. Isothermal tests provide further evidence for the existence of a limiting shear stress τ c at which the fluid shears in the manner of a plastic solid. At stresses below this limit the experimental data are found to be in very good accord with the non-linear Maxwell rheological model based on the Eyring theory of fluid flow proposed by Johnson and Tevaarwerk and by Hirst and Moore. The model incorporates three fluid properties: shear modulus G, viscosity τ and Eyring stress τ 0 . Disc machine measurements of τ, τ 0 and the limiting shear stress τ c for three fluids—a mineral oil HVI 650, a synthetic polyphenyl ether 5P4E and a traction fluid Santotrac 50—are presented for a range of pressures (0.6–2.5 GPa) and temperatures (40–120°C).
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“These equations provide quick estimates of certain key parameters, such as central [5] and minimum film thickness [6] and viscous [7] and boundary friction [8].”
From Application of Tribological Artificial Neural Networks in Machine Elements (2023) · cites this paper as [7]
Citations
Cites
Viscosity, Plasticity, and Diffusion as Examples of Absolute Reaction Rates
Eyring, H. (1936) · The Journal of Chemical Physics · doi:10.1063/1.1749836 · Cited by 3,218
Elasto-Hydrodynamic Lubrication
(1977) · Elsevier eBooks · doi:10.1016/c2013-0-05764-7 · Cited by 591
Shear behaviour of elastohydrodynamic oil films
Johnson, K. L., & Tevaarwerk, J. L. (1977) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1977.0129 · Cited by 515
Self-citationA simple theory of asperity contact in elastohydro-dynamic lubrication
Johnson, K. L., Greenwood, J. A., & Poon, S. Y. (1972) · Wear · doi:10.1016/0043-1648(72)90445-0 · Cited by 452
Self-citationA Rheological Model for Elastohydrodynamic Contacts Based on Primary Laboratory Data
Bair, S., & Winer, W. O. (1979) · Journal of Lubrication Technology · doi:10.1115/1.3453342 · Cited by 360
The dynamic properties of supercooled liquids
Harrison, G. (1976) · CERN Document Server (European Organization for Nuclear Research) · Cited by 251
Shear Strength Measurements of Lubricants at High Pressure
Bair, S., & Winer, W. O. (1979) · Journal of Lubrication Technology · doi:10.1115/1.3453339 · Cited by 230
The lubrication of rollers IV. Measurements of friction and effective viscosity
Crook, A. W. (1963) · Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences · doi:10.1098/rsta.1963.0005 · Cited by 152
The dynamic properties of supercooled liquids
Hutton, J. F. (1976) · Tribology International · doi:10.1016/0301-679x(76)90085-2 · Cited by 143
Microscopic aspects of adhesion and lubrication
Archard, J. F. (1982) · Tribology International · doi:10.1016/0301-679x(82)90076-7 · Cited by 134
Research works printed but not linked: 9
- Johnson K. L., Cameron R. Shear behaviour of EHD oil films at high rolling contact pressures. Proc. Instn Mech. Engrs, Part 1, 1967, 182, 307–319.
- Lanov J. L., Peterkin M. E. Traction and film temperature as related to the glass transition and freezing. Trans. ASLE, 1977, 21, 250–256.
- Dowson D., Higginson G. R. Elastohydrodynamic lubrication, 2nd edition, 1977 (Pergamon Press, Oxford).
- Evans C. R., Johnson K. L. Regimes of traction in elastohydrodynamic lubrication. Proc. Instn Mech. Engrs, Part C, 1986, 200(C5), this issue.
- Johnson K. L., Nayak L., Moore A. J. Determination of elastic modulus from disc machine tests. Proceedings of 5th Leeds-Lyon Symposium on Tribology, Leeds, 1978, p. 204 (Mechanical Engineering Publications, London).
- Conry T. F., Johnson K. L., Owen S. Viscosity in the thermal region of EHD traction. Proceedings of 6th Leeds–Lyon Symposium on Tribology, Lyon, 1979, (Mechanical Engineering Publications, London).
- Hutton J. F., Phillips M. C., Ellis J., Powell G., Wyn-Jones E. Viscoelastic studies of lubricants and other liquids in shear and bulk deformation. Proceedings of 5th Leeds–Lyon Symposium on Tribology, Leeds, 1978, p. 173 (Mechanical Engineering Publications, London).
- Hutton J. F. Re-assessment of rheological properties of LVI 260 oil measured in a disc machine. Trans. ASME, J. Tribology, Ser. F, 1984, 106, 537.
- Tevaarwerk J. L. Shear of elastohydrodynamic on films. PhD dissertation, University of Cambridge, 1976.
Cited by
Elastohydrodynamic and micro-elastohydrodynamic lubrication
Dowson, D. (1995) · Wear · doi:10.1016/0043-1648(95)06660-8 · Cited by 213
Stress-augmented thermal activation: Tribology feels the force
Spikes, H. (2018) · Friction · doi:10.1007/s40544-018-0201-2 · Cited by 176
Spikes, H. A. (2006) · Lubrication Science · doi:10.1002/ls.23 · Cited by 171
History, Origins and Prediction of Elastohydrodynamic Friction
Spikes, H. A., & Zhang, J. (2014) · Tribology Letters · doi:10.1007/s11249-014-0396-y · Cited by 167
Atomic-Scale Issues in Tribology: Interfacial Junctions and Nano-elastohydrodynamics
Landman, U., Luedtke, W. D., & Gao, J. (1996) · Langmuir · doi:10.1021/la950890+ · Cited by 164
Metadata
- Authors
- Evans, C. R., & Johnson, K. L.
- Affiliations
- University of Cambridge (GB)
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science
- Publisher
- SAGE Publications
- Published
- 1986-09
- Volume
- 200
- Issue
- 5
- Pages
- 303-312
- ISSN
- 0263-7154 (ISSN-L)
- 2058-3397
- OpenAlex
- W2051777498
- Cited by
- 243
- References
- 24
- Citations by year
- 2026: 2 · 2025: 4 · 2024: 3 · 2023: 5 · 2022: 3 · 2021: 8 · 2020: 7 · 2019: 14 · 2018: 5 · 2017: 8 · 2016: 8 · 2015: 8 · 2014: 6 · 2013: 4 · 2012: 4
- FWCI
- 7.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Keywords
- elastohydrodynamic lubrication, lubricant rheology, limiting shear stress, shear modulus, viscosity, mineral oil, traction fluids, high-pressure lubrication
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Rheological Properties of Elastohydrodynamic Lubricants. https://app.cochat.ai/papers/10.1243/pime_proc_1986_200_134_02
- The paper
- Evans, C. R., & Johnson, K. L. (1986). The Rheological Properties of Elastohydrodynamic Lubricants. Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science. https://doi.org/10.1243/pime_proc_1986_200_134_02
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.