Thermal, rheological and morphological properties of poly (lactic acid) (PLA) and talc composites
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
In this study, composites based on poly(lactic acid) (PLA)/talc were prepared at different compositions by melt mixing in a twin screw extruder.The effect of a nucleating agent, talc, on the crystallization behavior, rheological and morphological properties of PLA was investigated.DSC results showed that the addition of the mineral filler in the range between 1 and 5 wt.% to the PLA matrix increases the degree of crystallinity.This finding shows that talc acted as a nucleating agent for PLA during the processing stage.The composites morphology was also studied using a scanning electron microscope (SEM).The micrographs showed that a good dispersion of talc was achieved in all compositions analyzed.The rheology of PLA/talc composites was evaluated with the dynamic mode and correlated with the aforementioned observed morphology.The results showed that the addition of the mineral filler to the PLA matrix decreased system viscosity, thus highlighting the filler's lubricant effect.As talc content increased, system's viscosity also increased, providing material with higher elastic behavior.Thermal analysis showed that the composition of 3 wt.% of talc added to polymer matrix seems to be interesting with regard to the need of articles possessing good dimension stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Melting behavior of poly(l-lactic acid): X-ray and DSC analyses of the melting process
Yasuniwa, M., Sakamo, K., Ono, Y., & Kawahara, W. (2008) · Polymer · doi:10.1016/j.polymer.2008.02.034 · Cited by 213
Crystallization kinetics of virgin and processed poly (lactic acid)
Pantani, R., De Santis, F., Sorrentino, A., De Maio, F., & Titomanlio, G. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.04.018 · Cited by 161
Xu, H., Teng, C., & Yu, M. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.090 · Cited by 113
Cited by
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Finnerty, J., Rowe, S., Howard, T., Connolly, S., Doran, C., Devine, D. M., Gately, N. M., Chyzna, V., Portela, A., Bezerra, G. S. N., et al. (2023) · Journal of Composites Science · doi:10.3390/jcs7040141 · Cited by 66
Aliphatic Polyester-Based Biodegradable Microbeads for Sustainable Cosmetics
Nam, H. C., & Park, W. H. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00017 · Cited by 29
Eco-friendly poly(lactic acid) microbeads for cosmetics via melt electrospraying
Nam, H. C., & Park, W. H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.11.240 · Cited by 27
Ecofriendly poly(3-hydroxybutyrate-co-4-hydroxybutyrate) microbeads for sanitary products
Choi, Y. H., Park, J. J., Sim, E. J., Lee, E., Yoon, K. C., & Park, W. H. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.10.237 · Cited by 16
Metadata
- Authors
- Silva, A. L. N., Cipriano, T. F., ASilva, N. H. M. D. F. T. D., Rocha, M. C. C. G., Sousa, A. F., & Silva, G. M. D.
- Venue
- Polímeros Ciência e Tecnologia
- Publisher
- FapUNIFESP (SciELO)
- Published
- 2014
- Volume
- 24
- Issue
- 3
- Pages
- 276-282
- ISSN
- 0104-1428 (ISSN-L)
- 1678-5169
- OpenAlex
- W2058133550
- Cited by
- 85
- References
- 6
- FWCI
- 2.30
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal, rheological and morphological properties of poly (lactic acid) (PLA) and talc composites. https://app.cochat.ai/papers/10.4322/polimeros.2014.067
- The paper
- Silva, A. L. N., Cipriano, T. F., ASilva, N. H. M. D. F. T. D., Rocha, M. C. C. G., Sousa, A. F., & Silva, G. M. D. (2014). Thermal, rheological and morphological properties of poly (lactic acid) (PLA) and talc composites. Polímeros Ciência e Tecnologia. https://doi.org/10.4322/polimeros.2014.067
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.