CoChat

Aliphatic Polyester-Based Biodegradable Microbeads for Sustainable Cosmetics

Nam, Hyeong Chan, Park, Won Ho · 2020 · ACS Biomaterials Science & Engineering

The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.

Abstract

Marine pollution stemming from plastic microbeads (MBs) in personal care products has been substantially increased because of their nonbiodegradability and high adsorption capacity against persistent organic pollutants (POPs) in seawater. Moreover, the manufacturing process of MBs has been based on wet processes, such as emulsification, microfluidics, and precipitation. Therefore, a green process for obtaining biodegradable MBs is urgently necessary. Aliphatic polyesters, such as poly(lactic acid) (PLA, radiation-degradable) and poly(ε-caprolactone) (PCL, radiation-cross-linkable), have biodegradability and melt processability. The eco-friendly melt electrospraying process is a simple and cost-effective method for the preparation of MBs without the need for organic reagents. In this study, the PLA and PCL MBs were obtained by adjusting the main processing parameters during the melt electrospraying process. The weight losses of PLA and PCL MBs in aqueous environments occurred faster than those of positive controls, and the thermal transition parameters were decreased with the hydrolytic degradation of MBs. In the POP adsorption test, the biodegradable MBs showed poor adsorption because of their low specific surface area. The results of the cleansing efficiency test indicated that biodegradable MBs have great potential as more sustainable cosmetics to replace nondegradable MBs.

Overview

Integrity signals

Registry

Crossref · 10.1021/acsbiomaterials.0c00017

Cites

43 of 43 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 43 references

Research works printed but not linked: 2

  1. Leslie H. A., 2014, Review of Microplastics in Cosmetics
  2. Ritter, L.; Solomon, K.; Forget, J. R.; Stemeroff, M.; O’leary, C. A review of selected persistent organic pollutants. International Programme on Chemical Safety (IPCS), 1995.

Cited by

See all 29

Metadata

Authors
Nam, H. C., & Park, W. H.
Affiliations
Chungnam National University (KR)
Corresponding author
Park, Won Ho
Venue
ACS Biomaterials Science & Engineering
Published
2020-03-09
Volume
6
Issue
4
Pages
2440-2449
ISSN
2373-9878 (ISSN-L)
OpenAlex
W3012314086
Cited by
29
References
43
Citations by year
2026: 5 · 2025: 2 · 2024: 9 · 2023: 3 · 2022: 4 · 2021: 3 · 2020: 3
FWCI
0.80
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Biomaterials Science & Engineering (publishedVersion)
  • PubMed (publishedVersion)
Funders
National Research Foundation of Korea (2018R1A2A2A05021100)
Topics
  • Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
Keywords
aliphatic polyesters, polylactic acid, polycaprolactone, marine plastic pollution, personal care products, persistent organic pollutants, adsorption, hydrolytic degradation, sustainable cosmetics
MeSH terms
Biocompatible Materials, Capsules, Cosmetics, Microspheres, Polyesters

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Aliphatic Polyester-Based Biodegradable Microbeads for Sustainable Cosmetics. https://app.cochat.ai/papers/10.1021/acsbiomaterials.0c00017
The paper
Nam, H. C., & Park, W. H. (2020). Aliphatic Polyester-Based Biodegradable Microbeads for Sustainable Cosmetics. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.0c00017

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.