Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index; none of the 17 sources its claims cite is checked for support yet.

Calibration of channel depth and friction parameters in the LISFLOOD-FP hydraulic model using medium resolution SAR data

Open access
Wood, M., Hostache, R., Neal, J., Wagener, T., Giustarini, L., Chini, M., Corato, G., Matgen, P., Bates, P. · 2016 · Hydrology and earth system sciences

Abstract

Single satellite Synthetic Aperture Radar (SAR) data are now regularly used to estimate hydraulic model parameters such as channel roughness, depth and water slope. However despite channel geometry being critical to the application of hydraulic models and poorly known a priori, it is not frequently the object of calibration. This paper presents a unique method to calibrate simultaneously the bankfull channel depth and channel roughness parameters within a 2D LISFLOOD-FP hydraulic model using an archive of moderate (75m) resolution SAR satellite-derived flood extent maps and a binary performance measure for a 30x50km domain covering the confluence of the rivers Severn and Avon in the UK. The unknown channel parameters are located by a novel technique utilising the Information Content and identifiability of single and combinations of SAR flood extent maps to find the optimum images for model calibration. Highest Information Content is found in those SAR flood maps acquired near to the peak of the flood hydrograph, and improves when more images are combined. We found model sensitivity to variation in channel depth is greater than for channel roughness and a successful calibration for depth could only be obtained when channel roughness values were confined to a plausible range. The calibrated reach-average channel depth was within 0.9m (16% error) of the equivalent value determined from river cross section survey data, demonstrating that a series of moderate resolution SAR data can be used to successfully calibrate the depth parameters of a 2D hydraulic model.

Overview

CoChat Summary

TL;DR

The paper tests whether moderate-resolution (150 m) ENVISAT SAR-derived flood extent maps can simultaneously calibrate bankfull channel depth and channel roughness in a 2-D LISFLOOD-FP model for the Severn/Avon confluence. It finds depth is identifiable and can be calibrated within 0.9 m (16 %) of the surveyed equivalent, while channel roughness is much less sensitive and could not be confidently identified when depth was also unknown.

Key findings

Model sensitivity to channel depth parameter *r* was greater than to channel roughness *n_c*; *n_c* could not be identified with confidence while *r* was also unknown. With *n_c* constrained to 0.035–0.055, the top model had *r* = 0.086 (*n_c* = 0.036), giving a reach-average depth of about 6.51 m versus a surveyed equivalent of 5.63 m, a difference of 0.88 m (16 % error).

  • Information content for *r* from single SAR images ranged from 0.10 to 0.19, with the July 2007 images highest (0.16 and 0.19). Grouping improved information content: falling limb 0.64, March 2007 event 0.50, July 2007 event 0.37, January 2008 event 0.25, January 2010 event 0.14, and all SAR 0.68.
  • Identifiability for *r* was weak for individual SAR observations; all 11 SAR images combined gave strongest identifiability for *r* between approximately 0.10 and 0.12. When *n_c* was constrained to 0.035–0.055, the identifiable *r* range moved to approximately 0.08–0.10, translating to reach-average depth between 6 and 7.2 m.
  • CSI validation scores: aerial-photograph-derived versus ENVISAT-derived flood extent = 0.47; observed model versus aerial = 0.74 and versus ENVISAT = 0.43; test model versus aerial = 0.75 and versus ENVISAT = 0.46.

Methods

The study used a 2-D LISFLOOD-FP subgrid hydraulic model at 75 m resolution over a 30.5 × 52.4 km domain around Tewkesbury, UK, for four flood events (March 2007, July 2007, January 2008, January 2010). It used 11 ENVISAT wide swath mode SAR acquisitions (150 m resolution, resized to 75 m), converted to binary flood extent maps with the Matgen et al./Giustarini et al./Chini et al. algorithm, and compared simulated and observed maps using the critical success index (CSI), which ignores correct rejections.

  • The calibration sampled 1000 parameter sets with Latin hypercube sampling for *r* (0–0.5) and channel Manning *n_c* (0.015–0.100), then applied dynamic identifiability analysis (DYNIA) to CSI scores to compute information content and identifiability. SAR data were grouped by flood event, position on the hydrograph, and all available images.
  • An “observed” model used surveyed cross sections with fixed *n_c* = 0.038; the “test” model calibrated *r* and *n_c*. Floodplain Manning roughness was fixed at 0.06, the DEM was a 2 m lidar DSM spatially averaged to 75 m, inflows came from EA gauges, and the downstream boundary used a fixed energy slope of 0.00007. Validation used a 0.2 m aerial photograph from 24 July 2007 upscaled to 75 m.

Limitations

The paper states that SAR processing errors were not considered; it assumes no errors in return signals or processing and that derived flood maps represent the true and full flood extent. It also states that the importance of SAR resolution was not tested, that through-hydrograph categorization used only a single gauge at Saxons Lode and may oversimplify flood dynamics, and that *n_c* was less sensitive and could not be located when *r* varied, likely because the initial *n_c* range was too broad and depth dominates at this model scale.

  • The paper states model assumptions: *r* is a linear scaling of depth to width, depth and width are uniform along the modelled reach, and results represent a reach-average depth. It notes this may be more appropriate for smaller subreaches or medium-sized catchments, and that no bridges or weirs were included and floodplain roughness was constant.
  • Evident from the text: only 11 SAR images were available, with limited numbers per hydrograph category; the observed model’s channel roughness was not calibrated; SAR flood maps can have missing sections and bias; and no formal propagation of SAR processing uncertainty into the calibration results was performed.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.5194/hess-2015-511

Cites

73 of 73 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 General scheme of the three processing steps of the flood detection algorithm.
Figure 1 General scheme of the three processing steps of the flood detection algorithm.CC-BY · From the PDF
Figure 2 Extent of the River Severn model.
Figure 2 Extent of the River Severn model.CC-BY · From the PDF
Image 3
CC-BY · From the PDF
Image 4
CC-BY · From the PDF
Image 5
CC-BY · From the PDF
Figure 6 Identifiability against parameter r for flood events.
Figure 6 Identifiability against parameter r for flood events.CC-BY · From the PDF
Figure 7 Identifiability against r parameter for different stages in hydrograph.
Figure 7 Identifiability against r parameter for different stages in hydrograph.CC-BY · From the PDF
Figure 8 Identifiability against r parameter for all hydrographs.
Figure 8 Identifiability against r parameter for all hydrographs.CC-BY · From the PDF
Figure 9 Identifiability for 23 July 2007 at 10:27 GMT showing all data (solid line) and with n c restricted to between 0.035 and 0.055 (dashed line).
Figure 9 Identifiability for 23 July 2007 at 10:27 GMT showing all data (solid line) and with n c restricted to between 0.035 and 0.055 (dashed line).CC-BY · From the PDF

Verification

Claims the paper makes

0 Valid · 4 Not valid · 14 Not checked · 88 Own results and interpretations

60 more claims

Create a free account to see all 106 claims and to verify the 13 references still open.

See all claims — free account
  • It may state two separate claims as one. 27
  • Probably not a substantial claim. 21

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Research works printed but not linked: 2

  1. Chini, M., Hostache, R., Giustarini, L., and Matgen, P.: A Hierar- chical Split-Based Approach (HSBA) for automatically mapping flooded areas using SAR images of variable size and resolution, IEEE T. Geosci. Remote, in review, 2016.
  2. Mason, I. B.: Binary Events. Forecast verification: a practitioner's guide in atmospheric science, John Wiley and Sons, Chichester, 2003.

Cited by

See all 123

Metadata

Authors
Wood, M., Hostache, R., Neal, J., Wagener, T., Giustarini, L., Chini, M., Corato, G., Matgen, P., & Bates, P.
Affiliations
  • University of Bristol (GB)
  • Luxembourg Institute of Science and Technology (LU)
Corresponding author
Wood, M.
Venue
Hydrology and earth system sciences
Published
2016-01-18
Volume
20
Issue
12
Pages
4983-4997
ISSN
1027-5606 (ISSN-L)
OpenAlex
W2550967757
Cited by
123
References
73
Citations by year
2026: 7 · 2025: 6 · 2024: 7 · 2023: 13 · 2022: 15 · 2021: 18 · 2020: 19 · 2019: 14 · 2018: 15 · 2017: 7 · 2016: 2
FWCI
5.55
Type
journal article
Language
en
Open access
Locations
  • Hydrology and earth system sciences (publishedVersion, cc-by)
  • Bristol Research (University of Bristol) (publishedVersion, cc-by)
  • HAL (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
Funders
Fonds National de la Recherche Luxembourg
Topics
  • Physical Sciences › Environmental Science › Global and Planetary Change › Flood Risk Assessment and Management
  • Physical Sciences › Environmental Science › Water Science and Technology › Hydrology and Watershed Management Studies
  • Physical Sciences › Environmental Science › Environmental Engineering › Soil Moisture and Remote Sensing
Keywords
LISFLOOD-FP, hydraulic model calibration, channel depth, channel roughness, friction parameters, information content, parameter identifiability, 2D hydraulic modelling, flood hydrograph

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-19, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-19 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.