CoChat

The DOI matches its Crossref record; 123 of the 125 references it cites were found in a registry or an index, and 2 are not checked yet.

Tectono-thermal evolution of Oman’s Mesozoic passive continental margin under the obducting Semail Ophiolite: A case study of Jebel Akhdar, Oman

Open access

Published version of a preprint

Abstract

We present a study of pressure and temperature evolution in the passive continental margin under the Oman Ophiolite using numerical basin models calibrated with thermal maturity data, fluid-inclusion thermometry, and low-temperature thermochronometry and building on the results of recent work on the tectonic evolution. Because the Oman mountains experienced only weak post-obduction overprint, they offer a unique natural laboratory for this study. Thermal maturity data from the Adam Foothills constrain burial in the basin in front of the advancing nappes to at least 4 km. Peak temperature evolution in the carbonate platform under the ophiolite depends on the burial depth and only weakly on the temperature of the overriding nappes, which have cooled during transport from the oceanic subduction zone to emplacement. Fluid-inclusion thermometry yields pressure-corrected homogenization temperatures of 225 to 266 ∘ C for veins formed during progressive burial, 296–364 ∘ C for veins related to peak burial, and 184 to 213 ∘ C for veins associated with late-stage strike-slip faulting. In contrast, the overlying Hawasina nappes have not been heated above 130–170 ∘ C, as witnessed by only partial resetting of the zircon (U-Th)/He thermochronometer. In combination with independently determined temperatures from solid bitumen reflectance, we infer that the fluid inclusions of peak-burial-related veins formed at minimum pressures of 225–285 MPa. This implies that the rocks of the future Jebel Akhdar Dome were buried under 8–10 km of ophiolite on top of 2 km of sedimentary nappes, in agreement with thermal maturity data from solid bitumen reflectance and Raman spectroscopy. Rapid burial of the passive margin under the ophiolite results in sub-lithostatic pore pressures, as indicated by veins formed in dilatant fractures in the carbonates. We infer that overpressure is induced by rapid burial under the ophiolite. Tilting of the carbonate platform in combination with overpressure in the passive margin caused fluid migration towards the south in front of the advancing nappes. Exhumation of the Jebel Akhdar, as indicated by our zircon (U-Th)/He data and in agreement with existing work on the tectonic evolution, started as early as the Late Cretaceous to early Cenozoic, linked with extension above a major listric shear zone with top-to-NNE shear sense. In a second exhumation phase the carbonate platform and obducted nappes of the Jebel Akhdar Dome cooled together below ca. 170 ∘ C between 50 and 40 Ma before the final stage of anticline formation.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.5194/se-10-149-2019

Cites

123 of 125 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 (a) Tectonic setting of the Oman mountains. In dark gray are the three tectonic windows of Hawasina, Jebel Akhdar, and Saih Hatat, as well as the Adam Foothills. Brown areas show the exposed Semail Ophiolite, black lines denote the obduction fronts of Semail and Masirah ophiolites, and red lines denote lithosphere-scale active faults. The modeled transect (black line) crosscuts the Jebel Akhdar window and continues to the Natih and Fahud oil fields in the southwestern mountain foreland. (b) Geologic map of the Jebel Akhdar window with the location of the modeled transect (solid black line) and the locations of thermal maturity data (x).
Figure 1 (a) Tectonic setting of the Oman mountains. In dark gray are the three tectonic windows of Hawasina, Jebel Akhdar, and Saih Hatat, as well as the Adam Foothills. Brown areas show the exposed Semail Ophiolite, black lines denote the obduction fronts of Semail and Masirah ophiolites, and red lines denote lithosphere-scale active faults. The modeled transect (black line) crosscuts the Jebel Akhdar window and continues to the Natih and Fahud oil fields in the southwestern mountain foreland. (b) Geologic map of the Jebel Akhdar window with the location of the modeled transect (solid black line) and the locations of thermal maturity data (x).CC-BY · From the PDF
Figure 2 Structural transect used for modeling the Jebel Akhdar Dome and its southern foreland (Al-Lazki et al., 2002; Filbrandt et al., 2006; Searle, 2007; Warburton et al., 1990). Highlighted are the locations of the pseudo-wells (black circles) in Wadi Nakhr, Wadi Yiqah, and at Jebel Qusaybah, Adam Foothills, which were used for model calibration.
Figure 2 Structural transect used for modeling the Jebel Akhdar Dome and its southern foreland (Al-Lazki et al., 2002; Filbrandt et al., 2006; Searle, 2007; Warburton et al., 1990). Highlighted are the locations of the pseudo-wells (black circles) in Wadi Nakhr, Wadi Yiqah, and at Jebel Qusaybah, Adam Foothills, which were used for model calibration.CC-BY · From the PDF
Figure 3 Stratigraphy of the Jebel Akhdar area with its two passive margin sequences Autochthon A and B overthrust by Hawasina and Semail nappes and unconformably overlain by neo-autochthonous units. Thermal calibration data are shown: ZHe ages (Table 2) show two different grain age clusters. Peak burial temperatures from organic matter maturity (Table 1) outline the temperature increase with stratigraphic age. Temperatures shown relate to the measurements and related uncertainties of the calculations (U: unit, P: period). Note that the Semail and Hawasina nappes are shown in their structural rather than stratigraphic positions; lithological data are compiled from Beurrier et al. (1986), Loosveld et al. (1996), Terken et al. (2001), and Forbes et al. (2010).
Figure 3 Stratigraphy of the Jebel Akhdar area with its two passive margin sequences Autochthon A and B overthrust by Hawasina and Semail nappes and unconformably overlain by neo-autochthonous units. Thermal calibration data are shown: ZHe ages (Table 2) show two different grain age clusters. Peak burial temperatures from organic matter maturity (Table 1) outline the temperature increase with stratigraphic age. Temperatures shown relate to the measurements and related uncertainties of the calculations (U: unit, P: period). Note that the Semail and Hawasina nappes are shown in their structural rather than stratigraphic positions; lithological data are compiled from Beurrier et al. (1986), Loosveld et al. (1996), Terken et al. (2001), and Forbes et al. (2010).CC-BY · From the PDF
Figure 4 Map view of ZHe ages (in Ma). Data outline a general cooling between 58 : 9 7 : 0 and 39 : 8 3 : 0 Ma. Some samples outside of the dome show two age clusters, with an additional age of ca. 100 Ma. Additional temperature data refer to zircon fission track ages from (*) Saddiqi et al. (2006), apatite fission track ages from ( 1 ) Poupeau et al. (1998) and (+) Mount et al. (1998), and AHe, AFT, and ZFT ages from ( , gray) Hansman et al. (2017). Moreover, the locations of samples used for fluid-inclusion measurements are shown. Colors in the background depict geological units (brown: ophiolite, pink: Hawasina units, light green: Muti Fm., dark green: Wasia and Kahmah Gp., blue: Sahtan Gp., purple: Mahil Fm., orange: Saiq Fm., gray: pre-Permian, shaded DEM from Esri, Digital Globe, swisstopo, and the GIS user community).
Figure 4 Map view of ZHe ages (in Ma). Data outline a general cooling between 58 : 9 7 : 0 and 39 : 8 3 : 0 Ma. Some samples outside of the dome show two age clusters, with an additional age of ca. 100 Ma. Additional temperature data refer to zircon fission track ages from (*) Saddiqi et al. (2006), apatite fission track ages from ( 1 ) Poupeau et al. (1998) and (+) Mount et al. (1998), and AHe, AFT, and ZFT ages from ( , gray) Hansman et al. (2017). Moreover, the locations of samples used for fluid-inclusion measurements are shown. Colors in the background depict geological units (brown: ophiolite, pink: Hawasina units, light green: Muti Fm., dark green: Wasia and Kahmah Gp., blue: Sahtan Gp., purple: Mahil Fm., orange: Saiq Fm., gray: pre-Permian, shaded DEM from Esri, Digital Globe, swisstopo, and the GIS user community).CC-BY · From the PDF
Figure 5 Fluid-inclusion isochores (solid black lines) of analyzed fluid-inclusion populations with corresponding standard deviations (shaded areas; for Sahtan Group data from Holland et al., 2009b, conservatively 10 C are assumed). To estimate the pressure conditions during vein formation, calculated temperatures from thermal maturity data are added for the Sahtan Group (red line with error) and result in minimum trapping pressures of 254 30 MPa during peak burial (blue line with error).
Figure 5 Fluid-inclusion isochores (solid black lines) of analyzed fluid-inclusion populations with corresponding standard deviations (shaded areas; for Sahtan Group data from Holland et al., 2009b, conservatively 10 C are assumed). To estimate the pressure conditions during vein formation, calculated temperatures from thermal maturity data are added for the Sahtan Group (red line with error) and result in minimum trapping pressures of 254 30 MPa during peak burial (blue line with error).CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Figure 7 Modeling results: temperature distribution and temporal evolution along the transect of Fig. 6. Highlighted with vertical lines in the background are the locations of present-day oil fields and sampled valley locations.
Figure 7 Modeling results: temperature distribution and temporal evolution along the transect of Fig. 6. Highlighted with vertical lines in the background are the locations of present-day oil fields and sampled valley locations.CC-BY · From the PDF
Image 8
CC-BY · From the PDF
Figure 9 Sensitivity analysis of paleo-overburden and its influences on temperature in comparison to calculated peak temperatures (gray area) for pseudo-wells at Jebel Qusaybah (a) , Wadi Nakhr (b) , and Wadi Yiqah (c) .
Figure 9 Sensitivity analysis of paleo-overburden and its influences on temperature in comparison to calculated peak temperatures (gray area) for pseudo-wells at Jebel Qusaybah (a) , Wadi Nakhr (b) , and Wadi Yiqah (c) .CC-BY · From the PDF
Figure 10 Sensitivity analysis of paleo-overburden and its influences on thermal maturity in comparison to calibration data (gray area). Data are used to calibrate burial depth of the foredeep at the Jebel Qusaybah (a) and the paleo-ophiolite thickness at the southern flank of the mountains at Nakhr (b) . Its northern counterpart at Yiqah (c) is in agreement with the temperature data in Fig. 9, but too mature to be reconstructed by standard maturity modeling (Sweeney and Burnham, 1990).
Figure 10 Sensitivity analysis of paleo-overburden and its influences on thermal maturity in comparison to calibration data (gray area). Data are used to calibrate burial depth of the foredeep at the Jebel Qusaybah (a) and the paleo-ophiolite thickness at the southern flank of the mountains at Nakhr (b) . Its northern counterpart at Yiqah (c) is in agreement with the temperature data in Fig. 9, but too mature to be reconstructed by standard maturity modeling (Sweeney and Burnham, 1990).CC-BY · From the PDF
Figure 11 Sensitivity analysis: (a, b) different degrees of serpentinization of the peridotite within the Semail Ophiolite affect the temperature (a) and thermal maturity (b) evolution (modeled for Natih B Fm. at Wadi Nakhr). Pure peridotite (0 % serpentinization) requires an additional 3 km of ophiolite in addition to the 8-10 km of the best-fit model to equally match the calibration data; 100 % refers to complete serpentinization of the peridotite in the ophiolite. (c, d) The influence of variable heat flow values at peak burial on temperature (a) and thermal maturity (b) .
Figure 11 Sensitivity analysis: (a, b) different degrees of serpentinization of the peridotite within the Semail Ophiolite affect the temperature (a) and thermal maturity (b) evolution (modeled for Natih B Fm. at Wadi Nakhr). Pure peridotite (0 % serpentinization) requires an additional 3 km of ophiolite in addition to the 8-10 km of the best-fit model to equally match the calibration data; 100 % refers to complete serpentinization of the peridotite in the ophiolite. (c, d) The influence of variable heat flow values at peak burial on temperature (a) and thermal maturity (b) .CC-BY · From the PDF
Figure 12 Summary sketch of burial and exhumation for the top of the carbonate platform (Natih Fm.) integrating all presented datasets. Headings refer to the tectonic phases and captions to the structural generations I-IX (Grobe et al., 2018); enlarged ages reflect deepest burial reached at ca. 79 Ma, the onset of initial dome formation at 64 Ma (top-to-NNE shearing), and rapid exhumation active at 40 Ma. Temperatures on the right are based on RSCM and FI thermometry. Pressure at peak burial is calculated from FI measurements and independently determined temperature data to p p D 254 30 MPa and p L D 340 MPa. The exhumation history is reconstructed from ZHe ages.
Figure 12 Summary sketch of burial and exhumation for the top of the carbonate platform (Natih Fm.) integrating all presented datasets. Headings refer to the tectonic phases and captions to the structural generations I-IX (Grobe et al., 2018); enlarged ages reflect deepest burial reached at ca. 79 Ma, the onset of initial dome formation at 64 Ma (top-to-NNE shearing), and rapid exhumation active at 40 Ma. Temperatures on the right are based on RSCM and FI thermometry. Pressure at peak burial is calculated from FI measurements and independently determined temperature data to p p D 254 30 MPa and p L D 340 MPa. The exhumation history is reconstructed from ZHe ages.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 123 references

Research works printed but not linked: 4

  1. Neumaier, M.: Structural Restoration and Basin and Petroleum Systems Modeling: Case Studies from the Monagas Fold and Thrust Belt, Venezuela and the Moroccan Atlantic Margin, Dissertation, RWTH Aachen University, 2015.
  2. Stenhouse, P.: Reactive Transport and Fluid Pathways in Fracture-Controlled Flow Systems, Doctoral Dissertation, Australian National University, 2014.
  3. Virgo, S.: Aspects of crack-seal vein system evolution, Doctoral Dissertation, available at: http://nbn-resolving.de/urn/resolver.pl?urn=urn:nbn:de:hbz:82-opus-33858 (last access: January 2019), RWTH Aachen University, 2015.
  4. Virgo, S. and Arndt, M.: Evolution of a crack-seal calcite vein network in limestone: a high resolution structural, microstructural and geochemical study from the Jebel Akhdar high pressure cell, Oman Mountains, Diploma Thesis, RWTH Aachen, available at: https://d-nb.info/1008285536/34 (last access: January 2019), 2010.

Cited by

See all 71

Metadata

Authors
Grobe, A., von Hagke, C., Littke, R., Dunkl, I., Wübbeler, F., Muchez, P., & Urai, J. L.
Affiliations
  • RWTH Aachen University (DE)
  • University of Göttingen (DE)
  • KU Leuven (BE)
  • German University of Technology (OM)
Corresponding author
Grobe, Arne
Venue
Solid Earth
Published
2019-01-18
Volume
10
Issue
1
Pages
149-175
ISSN
  • 1869-9510 (ISSN-L)
  • 1869-9529
OpenAlex
W2885470008
Cited by
71
References
123
Citations by year
2026: 3 · 2025: 7 · 2024: 2 · 2023: 11 · 2022: 15 · 2021: 17 · 2020: 9 · 2019: 7
FWCI
8.13
Type
journal article
Language
en
Open access
Locations
  • Solid Earth (publishedVersion, cc-by)
  • Lirias (acceptedVersion, other-oa)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • GoeScholar The Publication Server of the Georg-August-Universität Göttingen (Georg-August-Universität Göttingen) (submittedVersion, cc-by)
  • RWTH Publications (RWTH Aachen) (submittedVersion, other-oa)
Funders
  • KU Leuven
  • RWTH Aachen University
Topics
  • Physical Sciences › Earth and Planetary Sciences › Geochemistry and Petrology › Geological and Geochemical Analysis
  • Physical Sciences › Earth and Planetary Sciences › Geology › Geological Studies and Exploration
  • Physical Sciences › Earth and Planetary Sciences › Geology › Geological and Geophysical Studies
Keywords
tectonothermal evolution, Samail ophiolite, passive continental margin, obduction, zircon (U-Th)/He thermochronology, low-temperature thermochronology, thermal maturity, overpressure, fluid migration, exhumation, thrust sheets, Oman Mountains

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Tectono-thermal evolution of Oman’s Mesozoic passive continental margin under the obducting Semail Ophiolite: A case study of Jebel Akhdar, Oman. https://app.cochat.ai/papers/10.5194/se-10-149-2019
The paper
Grobe, A., von Hagke, C., Littke, R., Dunkl, I., Wübbeler, F., Muchez, P., & Urai, J. L. (2019). Tectono-thermal evolution of Oman’s Mesozoic passive continental margin under the obducting Semail Ophiolite: A case study of Jebel Akhdar, Oman. Solid Earth. https://doi.org/10.5194/se-10-149-2019

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.