The DOI matches its Crossref record; 77 of the 77 references it cites were found in a registry or an index.
Systematic evaluation of observational methods assessing biomechanical exposures at work
Open accessAbstract
OBJECTIVES: This systematic review aimed to identify published observational methods assessing biomechanical exposures in occupational settings and evaluate them with reference to the needs of different users. METHODS: We searched scientific databases and the internet for material from 1965 to September 2008. Methods were included if they were primarily based on the systematic observation of work, the observation target was the human body, and the method was clearly described in the literature. A systematic evaluation procedure was developed to assess concurrent and predictive validity, repeatability, and aspects related to utility. At least two evaluators independently carried out this evaluation. RESULTS: We identified 30 eligible observational methods. Of these, 19 had been compared with some other method(s), varying from expert evaluation to data obtained from video recordings or through the use of technical instruments. Generally, the observations showed moderate to good agreement with the corresponding assessments made from video recordings; agreement was the best for large-scale body postures and work actions. Postures of wrist and hand as well as trunk rotation seemed to be more difficult to observe correctly. Intra- and inter-observer repeatability were reported for 7 and 17 methods, respectively, and were judged mostly to be good or moderate. CONCLUSIONS: With training, observers can reach consistent results on clearly visible body postures and work activities. Many observational tools exist, but none evaluated in this study appeared to be generally superior. When selecting a method, users should define their needs and assess how results will influence decision-making.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Meta-analysis of Observational Studies in Epidemiology<SUBTITLE>A Proposal for Reporting</SUBTITLE>
Stroup, D. F. (2000) · JAMA · doi:10.1001/jama.283.15.2008 · Cited by 20,623
Health Measurement Scales: A Practical Guide to Their Development and Use
Streiner, D. L., Norman, G. R., & Cairney, J. (1989) · Cited by 9,595
Vandenbroucke, J. P., von Elm, E., Altman, D. G., Gøtzsche, P. C., Mulrow, C. D., Pocock, S. J., Poole, C., Schlesselman, J. J., Egger, M., & Initiative, F. T. S. (2007) · PLoS Medicine · doi:10.1371/journal.pmed.0040297 · Cited by 8,613
Moher, D., Schulz, K. F., & Altman, D. G. (2001) · The Lancet · doi:10.1016/s0140-6736(00)04337-3 · Cited by 5,373
Moher, D., Cook, D. J., Eastwood, S., Olkin, I., Rennie, D., & Stroup, D. F. (1999) · The Lancet · doi:10.1016/s0140-6736(99)04149-5 · Cited by 4,826
Vandenbroucke, J. P., Elm, E. V., Altman, D. G., Gøtzsche, P. C., Mulrow, C. D., Pocock, S. J., Poole, C., Schlesselman, J. J., Egger, M., & initiative, F. T. S. (2007) · Annals of Internal Medicine · doi:10.7326/0003-4819-147-8-200710160-00010-w1 · Cited by 3,543
RULA: a survey method for the investigation of work-related upper limb disorders
McAtamney, L., & Nigel Corlett, E. (1993) · Applied Ergonomics · doi:10.1016/0003-6870(93)90080-s · Cited by 3,361
Moher, D., Schulz, K. F., & Altman, D. G. (2001) · BMC Medical Research Methodology · doi:10.1186/1471-2288-1-2 · Cited by 2,755
Health Measurement Scales: A Practical Guide to Their Development and Use
Vogelzang, J. L. (2015) · Journal of Nutrition Education and Behavior · doi:10.1016/j.jneb.2015.03.007 · Cited by 2,337
Rapid entire body assessment (REBA)
Hignett, S., & McAtamney, L. (2000) · Applied Ergonomics · doi:10.1016/s0003-6870(99)00039-3 · Cited by 2,260
Porta, M. (2026) · doi:10.1093/acref/9780197663639.001.0001 · Cited by 2,175
Revised NIOSH equation for the design and evaluation of manual lifting tasks
WATERS, T. R., PUTZ-ANDERSON, V., GARG, A., & FINE, L. J. (1993) · Ergonomics · doi:10.1080/00140139308967940 · Cited by 2,042
Moher, D., Schulz, K. F., Altman, D. G., & for the CONSORT Group* (2001) · Annals of Internal Medicine · doi:10.7326/0003-4819-134-8-200104170-00011 · Cited by 1,426
Correcting working postures in industry: A practical method for analysis
Karhu, O., Kansi, P., & Kuorinka, I. (1977) · Applied Ergonomics · doi:10.1016/0003-6870(77)90164-8 · Cited by 1,348
Ergonomic methods for assessing exposure to risk factors for work-related musculoskeletal disorders
David, G. C. (2005) · Occupational Medicine · doi:10.1093/occmed/kqi082 · Cited by 859
Handbook of Human Factors and Ergonomics Methods
(2004) · CRC Press eBooks · doi:10.1201/9780203489925 · Cited by 836
The Strain Index: A Proposed Method to Analyze Jobs For Risk of Distal Upper Extremity Disorders
Steven Moore, J., & Garg, A. (1995) · American Industrial Hygiene Association Journal · doi:10.1080/15428119591016863 · Cited by 751
Handbook of Human Factors and Ergonomics
(2012) · Wiley eBooks · doi:10.1002/9781118131350 · Cited by 742
A conceptual model for work-related neck and upper-limb musculoskeletal disorders.
Armstrong, T. J., Buckle, P., Fine, L. J., Hagberg, M., Jonsson, B., Kilbom, A., Kuorinka, I. A., Silverstein, B. A., Sjogaard, G., & Viikari-Juntura, E. R. (1993) · Scandinavian Journal of Work, Environment & Health · doi:10.5271/sjweh.1494 · Cited by 732
LI, G., & BUCKLE, P. (1999) · Ergonomics · doi:10.1080/001401399185388 · Cited by 556
WINKEL, J., & MATHIASSEN, S. E. (1994) · Ergonomics · doi:10.1080/00140139408963711 · Cited by 466
Self-citationThe occupational ergonomics handbook
Karwowski, W., & Marras, W. S. (2006) · Cited by 394
Buchholz, B., Paquet, V., Punnett, L., Lee, D., & Moir, S. (1996) · Applied Ergonomics · doi:10.1016/0003-6870(95)00078-x · Cited by 374
David, G., Woods, V., Li, G., & Buckle, P. (2008) · Applied Ergonomics · doi:10.1016/j.apergo.2007.03.002 · Cited by 369
Diversity and variation in biomechanical exposure: What is it, and why would we like to know?
Mathiassen, S. E. (2006) · Applied Ergonomics · doi:10.1016/j.apergo.2006.04.006 · Cited by 326
Self-citationAssessment of mechanical exposure in ergonomic epidemiology.
van der Beek, A. J., & Frings-Dresen, M. H. (1998) · Occupational and Environmental Medicine · doi:10.1136/oem.55.5.291 · Cited by 300
Kee, D., & Karwowski, W. (2001) · Applied Ergonomics · doi:10.1016/s0003-6870(01)00006-0 · Cited by 265
Moher, D., Cook, D. J., Eastwood, S., Olkin, I., Rennie, D., & Stroup, D. F. (2000) · Oncology Research and Treatment · doi:10.1159/000055014 · Cited by 235
Latko, W. A., Armstrong, T. J., Franzblau, A., Ulin, S. S., Werner, R. A., & Albers, J. W. (1999) · American Journal of Industrial Medicine · doi:10.1002/(sici)1097-0274(199908)36:2<248::aid-ajim4>3.0.co;2-q · Cited by 235
Kilbom, Å. (1994) · PubMed · Cited by 223
Classroom posture and self-reported back and neck pain in schoolchildren
Murphy, S., Buckle, P., & Stubbs, D. (2004) · Applied Ergonomics · doi:10.1016/j.apergo.2004.01.001 · Cited by 213
(2004) · Handbook of Human Factors and Ergonomics Methods · doi:10.1201/9780203489925-17 · Cited by 212
Development and Evaluation of an Observational Method for Assessing Repetition in Hand Tasks
Latko, W. A., Armstrong, T. J., Foulke, J. A., Herrin, G. D., Rabourn, R. A., & Ulin, S. S. (1997) · American Industrial Hygiene Association Journal · doi:10.1080/15428119791012793 · Cited by 210
A Comparison of Three Observational Techniques for Assessing Postural Loads in Industry
Kee, D., & Karwowski, W. (2007) · International Journal of Occupational Safety and Ergonomics · doi:10.1080/10803548.2007.11076704 · Cited by 209
Mathiassen, S. E., Möller, T., & Forsman, M. (2003) · Ergonomics · doi:10.1080/0014013031000090125 · Cited by 196
Self-citationLAST, J. M. (1986) · International Journal of Epidemiology · doi:10.1093/ije/15.2.277 · Cited by 196
A survey of tools and methods used by certified professional ergonomists
Dempsey, P. G., McGorry, R. W., & Maynard, W. S. (2005) · Applied Ergonomics · doi:10.1016/j.apergo.2005.01.007 · Cited by 195
Marras, W. S., Fine, L. J., Ferguson, S. A., & Waters, T. R. (1999) · Ergonomics · doi:10.1080/001401399185919 · Cited by 147
Fransson‐Hall, C., Gloria, R., Kilbom, Å., Winkel, J., Karlqvist, L., & Wiktorin, C. (1995) · Applied Ergonomics · doi:10.1016/0003-6870(95)00003-u · Cited by 135
Self-citationTime—A key issue for musculoskeletal health and manufacturing
Wells, R. P., Mathiassen, S. E., Medbo, L., et al. (2007) · Applied Ergonomics · doi:10.1016/j.apergo.2006.12.003 · Cited by 135
Self-citationJanowitz, I. L., Gillen, M., Ryan, G., et al. (2005) · Applied Ergonomics · doi:10.1016/j.apergo.2005.08.004 · Cited by 135
Evaluation of the Revised NIOSH Lifting Equation: A Cross-Sectional Epidemiologic Study
Waters, T., Baron, S., Piacitelli, L. A., Anderson, V. P., Skov, T., Sweeney, M. H., Wall, D. K., & Fine, L. J. (1999) · Spine · doi:10.1097/00007632-199902150-00019 · Cited by 126
Postural load and back pain of workers in the manufacturing of prefabricated concrete elements
Burdorf, A., GOVAERT, G., & Elders, L. A. M. (1991) · Ergonomics · doi:10.1080/00140139108964834 · Cited by 125
An observational method for classifying exposure to repetitive movements of the upper limbs
Colombini, D. (1998) · Ergonomics · doi:10.1080/001401398186306 · Cited by 118
McAtamney, L., & Hignett, S. M. (2004) · CRC Press eBooks · doi:10.1201/9780203489925.ch8 · Cited by 101
Validity of fixed-interval observations for postural assessment in construction work
Paquet, V. L., Punnett, L., & Buchholz, B. (2001) · Applied Ergonomics · doi:10.1016/s0003-6870(01)00002-3 · Cited by 98
Lee, E. C., Rafiq, A., Merrell, R. C., Ackerman, R., & Dennerlein, J. T. (2005) · Surgical Endoscopy · doi:10.1007/s00464-004-8213-6 · Cited by 96
Measurement of trunk bending during work by direct observation and continuous measurement
Burdorf, A., DERKSEN, J. C. M., Naaktgeboren, B., et al. (1992) · Applied Ergonomics · doi:10.1016/0003-6870(92)90154-n · Cited by 92
Kadefors, R., & Forsman, M. (2000) · International Journal of Industrial Ergonomics · doi:10.1016/s0169-8141(99)00042-6 · Cited by 91
Self-citationBao, S. S., Howard, N. L., Spielholz, P. O., & Silverstein, B. A. (2006) · Ergonomics · doi:10.1080/00140130600555938 · Cited by 87
Occhipinti, E., & Colombini, D. (2007) · Ergonomics · doi:10.1080/00140130701674331 · Cited by 86
Bao, S. S., Howard, N. L., Spielholz, P. O., & Silverstein, B. A. (2007) · Ergonomics · doi:10.1080/00140130701458230 · Cited by 86
Comparison of ergonomic risk assessments in a repetitive high-risk sawmill occupation: Saw-filer
Jones, T. M., & Kumar, S. (2007) · International Journal of Industrial Ergonomics · doi:10.1016/j.ergon.2007.05.005 · Cited by 84
Drinkaus, P., Sesek, R. F., Bloswick, D. S., et al. (2003) · Work · doi:10.3233/wor-2003-00317 · Cited by 82
Carpal Tunnel Syndrome and Manual Work: A Longitudinal Study
Violante, F. S., Armstrong, T. J., Fiorentini, C., Graziosi, F., Risi, A., Venturi, S., Curti, S., Zanardi, F., Cooke, R. M. T., Bonfiglioli, R., et al. (2007) · Journal of Occupational and Environmental Medicine · doi:10.1097/jom.0b013e3181594873 · Cited by 82
Comparing the results of five lifting analysis tools
Russell, S. J., Winnemuller, L., Camp, J., & Johnson, P. W. (2006) · Applied Ergonomics · doi:10.1016/j.apergo.2005.12.006 · Cited by 80
Barrero, L. H., Katz, J. N., & Dennerlein, J. T. (2009) · Scandinavian Journal of Work Environment & Health · doi:10.5271/sjweh.1335 · Cited by 80
Observational Analysis of the Hand and Wrist: A Pilot Study
Stetson, D. S., Keyserling, W. M., Silverstein, B. A., & Leonard, J. A. (1991) · Applied Occupational and Environmental Hygiene · doi:10.1080/1047322x.1991.10387994 · Cited by 79
Accuracy and validity of observational estimates of wrist and forearm posture
Lowe, B. D. (2004) · Ergonomics · doi:10.1080/00140130310001653057 · Cited by 77
Paquet, V. L., Punnett, L., Woskie, S., et al. (2005) · Ergonomics · doi:10.1080/00140130500197302 · Cited by 73
Svendsen, S. W., Mathiassen, S. E., & Bonde, J. P. (2004) · Occupational and Environmental Medicine · doi:10.1136/oem.2004.015966 · Cited by 72
Self-citationPredictors of Persistent Elbow Tendonitis Among Auto Assembly Workers
Werner, R. A., Franzblau, A., Gell, N., Hartigan, A. G., Ebersole, M. L., & Armstrong, T. J. (2005) · Journal of Occupational Rehabilitation · doi:10.1007/s10926-005-5945-6 · Cited by 67
Quantitative postural load assessment for whole body manual tasks based on perceived discomfort
Chung, M. K., Lee, I.-H., & Kee, D. (2005) · Ergonomics · doi:10.1080/00140130400029217 · Cited by 67
Predictive Validity of the Strain Index in Manufacturing Facilities
Rucker, N. P., & Moore, J. S. (2002) · Applied Occupational and Environmental Hygiene · doi:10.1080/104732202753306177 · Cited by 60
Spielholz, P. O., Bao, S. S., Howard, N. L., Silverstein, B. A., Fan, J., Smith, C. K., & Salazar, C. (2008) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459620801922211 · Cited by 59
Design of strategies to assess lumbar posture during work
Burdorf, A., & van Riel, M. (1996) · International Journal of Industrial Ergonomics · doi:10.1016/0169-8141(95)00035-6 · Cited by 52
A Cross-Sectional Assessment of the ACGIH TLV for Hand Activity Level
Franzblau, A., Armstrong, T. J., Werner, R. A., et al. (2005) · Journal of Occupational Rehabilitation · doi:10.1007/s10926-005-0874-z · Cited by 48
A postural workload evaluation system based on a macro‐postural classification
Chung, M. K., Lee, I., Kee, D., et al. (2002) · Human Factors and Ergonomics in Manufacturing & Service Industries · doi:10.1002/hfm.10017 · Cited by 40
Test–retest repeatability of the Strain Index
Stephens, J.-P., Vos, G. A., Stevens, E. M., et al. (2005) · Applied Ergonomics · doi:10.1016/j.apergo.2005.07.007 · Cited by 39
Physical demands analysis of occupational tasks in neighborhood pubs
Jones, T., Strickfaden, M., & Kumar, S. (2005) · Applied Ergonomics · doi:10.1016/j.apergo.2005.03.002 · Cited by 38
Inter-Rater Reliability of the Strain Index
Stevens, E. M., Vos, G. A., Stephens, J.-P., & Moore, J. S. (2004) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459620490521142 · Cited by 36
Sources of variance in exposure to nonneutral trunk postures in varying working situations
van der Beek, A. J., Kuiper, J. I., Dawson, M., et al. (1995) · Scandinavian Journal of Work Environment & Health · doi:10.5271/sjweh.30 · Cited by 30
Denis, D., Lortie, M., & Bruxelles, M. (2002) · Ergonomics · doi:10.1080/00140130210136044 · Cited by 21
Winnemuller, L., Spielholz, P. O., Daniell, W., & Kaufman, J. D. (2004) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459620490453409 · Cited by 19
van der Molen, H. F., Mol, E., Kuijer, P., & Frings‐Dresen, M. H. W. (2006) · Applied Ergonomics · doi:10.1016/j.apergo.2006.06.007 · Cited by 13
The ACGIH TLV w for Hand Activity Level
Armstrong, T. J. (2006) · Cited by 13
Washington State Ergonomics Tool: predictive validity in the waste industry
Eppes, S. E. (2004) · OakTrust (Texas A&M University Libraries) · Cited by 8
Cited by
Detection of Physical Activity Types Using Triaxial Accelerometers
Skotte, J., Korshøj, M., Kristiansen, J., Hanisch, C., & Holtermann, A. (2014) · Journal of Physical Activity and Health · doi:10.1123/jpah.2011-0347 · Cited by 446
Chiasson, M.-È., Imbeau, D., Aubry, K., & Delisle, A. (2012) · International Journal of Industrial Ergonomics · doi:10.1016/j.ergon.2012.07.003 · Cited by 297
Colim, A., Sousa, N., Carneiro, P., Costa, N., Arezes, P., & Cardoso, A. (2020) · Work · doi:10.3233/wor-203144 · Cited by 26
Análisis postural del trabajador forestal en aserraderos de El Salto, Durango, México
Aragón-Vásquez, A. Y., Silva-Lugo, E. D., Nájera-Luna, J. A., Méndez-González, J., Hernández, F. J., & De la Cruz-Carrera, R. (2019) · Madera y Bosques · doi:10.21829/myb.2019.2531904 · Cited by 1
Metadata
- Authors
- Takala, E.-P., Pehkonen, I., Forsman, M., Hansson, G.-Å., Mathiassen, S. E., Neumann, W. P., Sjøgaard, G., Veiersted, K. B., Westgaard, R. H., & Winkel, J.
- Venue
- Scandinavian Journal of Work, Environment & Health
- Published
- 2009-11-24
- Volume
- 36
- Issue
- 1
- Pages
- 3-24
- ISSN
- 0355-3140 (ISSN-L)
- 1795-990X
- OpenAlex
- W2096212303
- Cited by
- 581
- References
- 77
- FWCI
- 25.28
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.