Advances in Pressure Swing Adsorption for Gas Separation
Open accessThe DOI matches its Crossref record; 157 of the 216 references it cites were found in a registry or an index.
Abstract
Pressure swing adsorption (PSA) is a well-established gas separation technique in air separation, gas drying, and hydrogen purification separation. Recently, PSA technology has been applied in other areas like methane purification from natural and biogas and has a tremendous potential to expand its utilization. It is known that the adsorbent material employed in a PSA process is extremely important in defining its properties, but it has also been demonstrated that process engineering can improve the performance of PSA units significantly. This paper aims to provide an overview of the fundamentals of PSA process while focusing specifically on different innovative engineering approaches that contributed to continuous improvement of PSA performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1 Schematic design of the first two-column pressure swing adsorption unit and valve sequencing for different steps in the cycle [1].](https://figures.cochat.ai/paper-figures/a153b9bb50094d0db58df2abc1ef2dec/advances-in-pressure-swing-adsorption-for-gas-separation-figure-1.png)



















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“the large flexibility of PSA is the main advantage of this process, which may because of this reason, it has a broad applications in the various areas [21,50].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [50]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242 · cited 1×
“Figure 1: Schematic design of the first two-column pressure swing adsorption unit and valve sequencing for different steps in the cycle [1].”
BackgroundTriblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundA New Zirconium Inorganic Building Brick Forming Metal Organic Frameworks with Exceptional Stability
Cavka, J. H., Jakobsen, S., Olsbye, U., Guillou, N., Lamberti, C., Bordiga, S., & Lillerud, K. P. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8057953 · Cited by 7,336 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundThermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
Metal–organic frameworks: a new class of porous materials
Rowsell, J. L. C., & Yaghi, O. M. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.03.034 · Cited by 2,963
Synthesis of New, Nanoporous Carbon with Hexagonally Ordered Mesostructure
Jun, S., Joo, S. H., Ryoo, R., Kruk, M., Jaroniec, M., Liu, Z., Ohsuna, T., & Terasaki, O. (2000) · Journal of the American Chemical Society · doi:10.1021/ja002261e · Cited by 2,424 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundMetal–organic frameworks—prospective industrial applications
Mueller, U., Schubert, M., Teich, F., Puetter, H., Schierle-Arndt, K., & Pastré, J. (2006) · J. Mater. Chem. · doi:10.1039/b511962f · Cited by 2,325 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundWeiner, J., & Ho, P.-T. (2003) · Wiley eBooks · Cited by 2,020
Adsorption Analysis: Equilibria and Kinetics: (With CD Containing Computer Matlab Programs)
Do, D. D. (1998) · Series on Chemical Engineering · doi:10.1142/p111 · Cited by 1,919 · cited 2×
“There are several pristine works that explain this phenomenon in detail [1–18].”
BackgroundLuz Martínez, S., Romero, R., López, J. C., Romero, A., Sánchez Mendieta, V., & Natividad, R. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1006867 · Cited by 1,669
Research works printed but not linked: 13
- 2001, Oil and Gas Journal, 99, 42
- 2008, Current Science, 95, 1684
- 1988, AIChE Symposium Series, 84, 70
- 2004, Hydrocarbon Engineering, 9, 53
- 1962, Chemical & Engineering News, 40, 59
- 2011, SAE International Journal of Aerospace, 4, 488
- 1993, Studies in Surface Science and Catalysis, 80, 788
- 2000, European Journal of Inorganic Chemistry, 801
- 1975, AIChE Symposium Series, 71, 69
- 1995, The Chemical Engineering Journal, 57, 137
- 1996, Adsorption, 3, 7
- 2008, European Patent Application, 1, 917
- 2012, Energy Procedia, 26, 2, 10.1016/j.egypro.2012.06.004 · DOI
Cited by
Items 101–200 of 285
Tingelinhas, J., Saragoça, C., Mohtar, A. A., Mateus, M. M., & Pinto, M. L. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c04209 · Cited by 20
Desorption strategies in CO₂ capture technologies: Novel approaches and future perspectives
Gómez, I. C., & Gutiérrez, C. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.116109 · Cited by 21
Prajapati, B. K., Anand, A., Gautam, S., & Singh, P. (2022) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-021-02249-y · Cited by 21
“However, hydrogen separation from the pyrolytic gas can be through pressure swing adsorption (PSA) (Grande 2012; Siew et al.”
BackgroundElectrochemical gas separation and inerting system
Aryal, U. R., Chouhan, A. P. S., Darling, R. M., Yang, Z., Perry, M. L., & Prasad, A. K. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229959 · Cited by 20
Hypercrosslinked waste polymers as adsorbents for O2/N2 separation
Maleki, F., Mashhadimoslem, H., Ghaemi, A., & Sadeghi, G. M. M. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.126779 · Cited by 18
Chen, D., Yang, F. L., Karousos, D. S., Lei, L., Favvas, E. P., & He, X. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.122842 · Cited by 17
Sunder, N., Fong, Y. Y., Bustam, M. A., & Lau, W. (2023) · Separations · doi:10.3390/separations10010041 · Cited by 19
Hsu, E., Peters, D., Çıtmacı, B., Chheda, P., Cui, X., Wang, Y., Morales‐Guio, C. G., & Christofides, P. D. (2024) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2024.07.052 · Cited by 18
Readiness and challenges of carbon capture technologies based on the shipping industry
Wu, H., Zhang, X., Wu, Q. H., Zhou, X., & Yue, S. (2024) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2024.116878 · Cited by 18
Adsorption characteristics of light gases on basalt rock-based zeolite 4A
Hwang, K., Hwang, M. J., Balathanigaimani, M. S., Nwe, K., Youn, Y., Choi, W., Kim, H., Nah, J. W., & Shim, W. G. (2019) · Adsorption · doi:10.1007/s10450-019-00086-6 · Cited by 19
“In the case of the adsorption process, pressure swing adsorption (PSA) method is considered as a useful method for CH4 separation from biogas (Grande 2012).”
MethodA Short Review on Various Purification Techniques Suitable for Biohydrogen-Mixed Gases
Muin, N. A. A., Isah, A., Asli, U. A., Sadikin, A. N., Norazahar, N., Kamaruddin, M. J., Hassim, M. H., Shin, H. W., & Azman, N. R. (2021) · Journal of Energy and Safety Technology (JEST) · doi:10.11113/jest.v3n2.52 · Cited by 18
“During the PSA process, the hydrogen is revered and purified at a pressure close to the feed pressure, while adsorbed impurities are removed by lowering the pressure[27].”
BackgroundSupercapacitive Swing Adsorption of Carbon Dioxide: Current Status and Perspectives
Wang, Y., Zhang, K., Feng, J., Sun, X., Li, C., Wang, K., Zhang, X., & Ma, Y. (2023) · Batteries & Supercaps · doi:10.1002/batt.202300283 · Cited by 19
CO2 adsorption by swing technologies and challenges on industrialization
Fouladi, N., Makarem, M. A., Sedghamiz, M. A., & Rahimpour, H. R. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819657-1.00011-6 · Cited by 18
Efficient separation of He/CH4 mixture by functionalized graphenylene membranes: A theoretical study
Pakdel, S., Erfan‐Niya, H., & Azamat, J. (2022) · Journal of Molecular Graphics and Modelling · doi:10.1016/j.jmgm.2022.108211 · Cited by 16
Evaluation of Mg-MOF-74 for post-combustion carbon dioxide capture through pressure swing adsorption
Mansour, R. B., Bamidele, O. E., & Habib, M. A. (2015) · International Journal of Energy Research · doi:10.1002/er.3428 · Cited by 16
“relatively high) because it enhances quick and easy change of gas pressure thereby reducing the time interval required between cycles of adsorption and desorption processes [5].”
BackgroundPerformance determination of high-purity N2-PSA-plants
Marcinek, A., Guderian, J., & Bathen, D. (2020) · Adsorption · doi:10.1007/s10450-020-00204-9 · Cited by 15
“Table 2 (Grande 2012) itemises PI for the N2-PSA technology—operated with a constant feed flow rate—as the purity, the productivity, the recovery, and the air demand.”
BackgroundSimulation of Binary CO2/CH4 Mixture Breakthrough Profiles in MIL‐53 (Al)
Gomez, L. F., Zacharia, R., Bénard, P., & Chahine, R. (2015) · Journal of Nanomaterials · doi:10.1155/2015/439382 · Cited by 15
“Our results are in agreement with Grande who recommends using the pellets instead of powder materials for efficient PSA separation [50].”
ResultOxygen storage properties and catalytic activity of layer-ordered perovskites BaY1−Gd Mn2O5+
Klimkowicz, A., Świerczek, K., Rząsa, T., Takasaki, A., & Dąbrowski, B. (2016) · Solid State Ionics · doi:10.1016/j.ssi.2016.01.038 · Cited by 15
Sinonasal Inverted Papilloma: A Narrative Review
Upadhya, I. B., & Rao, K. (2020) · Indian Journal of Otolaryngology and Head & Neck Surgery · doi:10.1007/s12070-020-02089-0 · Cited by 14
Multiscale design of a pressure swing adsorption process for natural gas purification
Quaranta, I. C. C., Pinheiro, L. S., Gonçalves, D. V., Peixoto, H. R., & Lucena, S. M. P. (2021) · Adsorption · doi:10.1007/s10450-021-00330-y · Cited by 14
“Generally, adsorbents should present favorable attributes, such as: high capacity, and selectivity, easily regenerability, and low cost [24, 25].”
BackgroundDodoo, D., Merkling, P. J., Madero‐Castro, R. M., Calero, S., & Gutiérrez‐Sevillano, J. J. (2024) · ACS Applied Energy Materials · doi:10.1021/acsaem.4c01162 · Cited by 19
Hybrid Framework Materials: Next‐Generation Engineering Materials
McCarron, J., Turner, B., & McHugh, L. (2025) · Advanced Engineering Materials · doi:10.1002/adem.202402554 · Cited by 16
Daalen, J. M. J., Meinders, M. J., Giardina, F., Roes, K. C. B., Stunnenberg, B. C., Mathur, S., Ainslie, P. N., Thijssen, D. H. J., & Bloem, B. R. (2022) · BMC Neurology · doi:10.1186/s12883-022-02770-7 · Cited by 15
“Instead of oxygen-rich air, the resultant hypoxic gas is administered to the patient [45].”
BackgroundPotential theory for prediction of high-pressure gas mixture adsorption on activated carbon and MOFs
Dundar, E., Zacharia, R., Chahine, R., & Bénard, P. (2014) · Separation and Purification Technology · doi:10.1016/j.seppur.2014.08.021 · Cited by 16
“Selective adsorption of certain gases from gaseous mixtures forms the fundamental basis of several industrial gas separation and purification processes, such as pressure swing adsorption (PSA) and temperature swing adsorption (TSA) [1,2].”
BackgroundKanhaiya, K., & Heinz, H. (2022) · Nano Letters · doi:10.1021/acs.nanolett.2c00490 · Cited by 13
Kheimi, M., & Salamah, S. K. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.139454 · Cited by 15
Breakthrough analysis of the CO2/CH4 separation on electrospun carbon nanofibers
Selmert, V., Kretzschmar, A., Kungl, H., Tempel, H., & Eichel, R. (2024) · Adsorption · doi:10.1007/s10450-023-00435-6 · Cited by 12
“The regeneration of the adsorbent saturated with CO 2 can be performed by a change of pressure using either pressure swing adsorption (PSA) [13, 14] or vacuum swing adsorption (VSA) [15, 16] or by a change of temperature by purging with a hot gas (temperature swing adsorption, TSA) [17] or heating…”
Rahimalimamaghani, A., Tanaka, D. A. P., Tanco, M. A. L., d’Angelo, M. F. N., & Gallucci, F. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.02.198 · Cited by 13
Shrotri, A. R., Birje, A. R., & Nandanwar, S. U. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.06.011 · Cited by 12
Solares, R. A. A., & Wood, J. (2020) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2020.04.039 · Cited by 12
Nadamani, M. N., Shadloo, M. S., & Dbouk, T. (2025) · Energies · doi:10.3390/en18246418 · Cited by 17
Roafi, H., Farrukh, S., Salahuddin, Z., Raza, A., Karim, S. S., & Waheed, H. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-03125-0 · Cited by 12
Li, Y., Wang, K., & Sun, Q. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.05.160 · Cited by 13
Optimal startup operation of a pressure swing adsorption
Sinha, P., & Padhiyar, N. U. (2019) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2019.06.049 · Cited by 11
Highly propylene equilibrium selective carbon molecular sieve adsorbent
Andrade, M., Relvas, F. M., & Mendes, A. M. M. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.116853 · Cited by 12
Sebastiani, F., Lücking, L., Sarić, M., James, J., Boon, J., van Dijk, H. A. J., Cobden, P. D., & Pieterse, J. A. Z. (2022) · Separations · doi:10.3390/separations9010020 · Cited by 10
“It is widely applied, as an example, to separate H2 and O2, respectively, from natural gas reformate and air [6,8,9].”
Benchaabane, M.-E. A., Gonçalves, G. T., Bloch, E., Paillaud, J., Daou, T. J., Bourrelly, S., Chaplais, G., & Llewellyn, P. L. (2022) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2022.112211 · Cited by 13
Dynamic Study of VSA and TSA Processes for VOCs Removal from Air
Talmoudi, R., Abdeljaoued, A., & Chahbani, M. H. (2018) · International Journal of Chemical Engineering · doi:10.1155/2018/2316827 · Cited by 12
Bordonhos, M., Severino, M. I., Marandi, A., Nouar, F., Jorge, M., Gomes, J. R. B., Serre, C., & Pinto, M. L. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.169276 · Cited by 14
Marzouk, O. A. (2025) · Processes · doi:10.3390/pr13051455 · Cited by 14
Riboldi, L., & Bolland, O. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.01.030 · Cited by 10
Czyrnek-Delêtre, M. M., Ahern, E., & Murphy, J. D. (2016) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.1627 · Cited by 13
Review of Membrane Oxygen Enrichment for Efficient Combustion
Ariono, D., & Wardani, A. K. (2017) · Journal of Physics Conference Series · doi:10.1088/1742-6596/877/1/012050 · Cited by 10
Daou, A. S. S., Fang, H., Boulfelfel, S. E., Ravikovitch, P. I., & Sholl, D. S. (2024) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.4c00066 · Cited by 10
Bashir, F. I., Porter, R., Catalanotti, E., & Mahgerefteh, H. (2025) · Energies · doi:10.3390/en18102440 · Cited by 11
Developing Advanced Mg‐Based Solid‐State Materials for Gas Separation and Purification: A Review
Zhang, N., Lin, X., Hu, Z., Ding, W., & Zou, J. (2025) · Interdisciplinary materials · doi:10.1002/idm2.12250 · Cited by 18
“After the sorbent is fully regenerated and the system is re ‐ pressurized, the PSA cycle is complete [22].”
Amponsah, J., Archibong-Eso, A., Fiagbe, Y. A. K., Opoku, D. O. A., Apatika, A. A., Adorkor, E., Adjei, S., & Ekpenyong, U. (2025) · ACS Omega · doi:10.1021/acsomega.5c03466 · Cited by 9
“17 CFD has become a cornerstone in modern engineering analysis because it lets researchers visualize velocity, pressure, and species-transport fields that are difficult and often impossible to measure experimentally.”
Trends in renewable energy: an overview
(2022) · Global NEST Journal · doi:10.30955/gnj.004286 · Cited by 12
Novel one-stage process for manufacturing 1,3-butadiene from ethanol
Dimian, A. C., & Bîldea, C. S. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2023.03.041 · Cited by 9
Remote control of desorption by radiofrequency heating: Single pellet experiments
Zadražil, A., & Štĕpánek, F. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.06.012 · Cited by 9
Novel Adsorption-Based Gas Treating Technology Platform for Upstream Gas Separations
Barnes, W., Chen, C., Fowler, T., McMahon, P., Nagavarapu, A. K., & Shatto, D. (2018) · Offshore Technology Conference · doi:10.4043/29001-ms · Cited by 9
Balasubramanian, V., Haque, N., Bhargava, S. K., & Parthasarathy, R. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.150904 · Cited by 8
Petrovic, B., Gorbounov, M., & Soltani, S. M. (2024) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2024.100245 · Cited by 8
“…slow diffusion of CO 2 into the zeolite pores would hinder mass transfer and result in a tendency for the CO 2 to flow through the bed rather than be adsorbed ( Boer et al., 2023 ), reducing the breakthrough time and increasing the required bed height, cycle time and ultimately cost ( Grande, 2012 ).”
Wang, L., Shahri, S. M. K., & Rioux, R. M. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b02860 · Cited by 8
Huang, Q., Niu, C. H., & Dalai, A. K. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b01662 · Cited by 8
Biogas upgrading and life cycle assessment of different biogas upgrading technologies
Hiloidhari, M., & Kumari, S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822808-1.00015-5 · Cited by 14
Simple energy-efficient electrochemically-driven CO2 scrubbing for biogas upgrading
Mohammadpour, H., Cord‐Ruwisch, R., Pivrikas, A., & Ho, G. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.05.155 · Cited by 8
Kakiuchi, T., Yajima, T., Shigaki, N., & Kawajiri, Y. (2022) · Adsorption · doi:10.1007/s10450-022-00371-x · Cited by 8
“An alternative approach to pressure equalization is rinse, which supplies high-purity CO2 gas into the column before desorption [27] to displace impurities.”
BackgroundInfluentialPerformance-Based Screening of Porous Materials for Carbon Capture
Farmahini, A. H., Krishnamurthy, S., Friedrich, D., Brandani, S., & Sarkisov, L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01266 · Cited by 7
“In fact, a significant amount of literature and studies have been accumulated over the years on design and optimization of pressure, vacuum, temperature, concentration, electric, and microwave swing adsorption processes, from simplified equilibrium models to more advanced numerical approaches [7-18].”
BackgroundReliability evaluation of a medical oxygen supply system by FTA based on intuitionistic fuzzy sets
Yousofnejad, Y., & Es’haghi, M. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e34649 · Cited by 9
“Y. Yousofnejad and M. Es ’ haghi maintain a stable flow and prevent any pulses caused by system interruptions [23,24].”
BackgroundBenkirane, L., Metyouy, K., & Chafik, T. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.125886 · Cited by 7
Optimal Design Procedure of Dual-Reflux Pressure Swing Adsorption Units for Nonlinear Separations
Rossi, E., Storti, G., & Rota, R. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b05889 · Cited by 7
Rossi, E., Storti, G., & Rota, R. (2020) · Adsorption · doi:10.1007/s10450-020-00274-9 · Cited by 7
“It has been demonstrated that the PSA technology can be successfully applied to several separations of industrial interest, such as hydrogen purification, air separation, CO2 capture, and CH4 upgrading (Grande 2012).”
BackgroundAcha, E., Requies, J., & Cambra, J. F. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-361-4.00013-3 · Cited by 7
Effects of activated carbon types on the CO2 supercapacitive swing adsorption performances
Wang, Y., Sun, X., Zhang, K., Feng, J., Sun, X., Li, C., Wang, K., Zhang, X., & Ma, Y. (2025) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-025-06271-8 · Cited by 7
“At present, the main CO 2 separation techniques available include amine-scrubbing [9], pressure swing adsorption (PSA) [10–17], temperature swing adsorption (TSA) [18–20], and electrochemical CO 2 separation technology.”
Li, N., Xiao, P., Liu, W., Liu, L., Wang, Z., Wang, J., Gao, P., Wu, Q., Ma, X., & Li, G. K. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.133271 · Cited by 7
Kuloglija, S., KOLUR, N. A., Kalman, V., Jordan, C., Golda, M., Makaruk, A., Engin, E., Balla, A., & Harasek, M. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.05.090 · Cited by 6
Shigaki, N., Okida, T., & Kawajiri, Y. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.134461 · Cited by 6
CFD modelling of CO2 adsorption onto activated carbon: Insights into reactor and process design
Sefidan, A. M., & Vepsäläinen, J. (2025) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2025.107055 · Cited by 7
Modelling and optimization of vacuum pressure swing adsorption CO2 capture pilot using MIL-160(Al)
Henrotin, A., Heymans, N., Duprez, M., & Weireld, G. D. (2025) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2025.12.030 · Cited by 6
Fe-mordenite for high-performance N2 rejection
Yu, Z., Yang, J., Mousavi, S. H., Xiao, P., Xue, Y., Zavabeti, A., Wang, Y., Chen, K., Liu, Z. J., Hu, G., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.157224 · Cited by 6
Applying membrane techniques to separate hydrogen from natural gas for hydrogen technologies
Wiciak, G., Szykowska, K., & Janusz-Szymańska, K. (2024) · Desalination and Water Treatment · doi:10.1016/j.dwt.2024.100863 · Cited by 7
Conceptual design of adsorptive recovery of ethane from residue gas stream using Na-ETS-10
Avila, A. M., Pérez, L. E., & Rajendran, A. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.117302 · Cited by 6
Study of CO2 Sorption Kinetics on Electrospun Polyacrylonitrile‐Based Carbon Nanofibers
Kretzschmar, A., Selmert, V., Weinrich, H., Kungl, H., Tempel, H., & Eichel, R. (2021) · Chemical Engineering & Technology · doi:10.1002/ceat.202000463 · Cited by 6
Dynamic Modeling of Nitrogen Adsorption on Zeolite 13X Bed
Shokroo, E. J., Kakavandi, I. A., Baghbani, M., & Farniaei, M. (2017) · Fluid Mechanics Research International Journal · doi:10.15406/fmrij.2017.01.00004 · Cited by 6
“CA Grande (2012) Advances in pressure swing adsorption for gas separation.”
BackgroundBasha, O. M., Weng, L., Men, Z., Xu, W. Q., & Morsi, B. I. (2016) · Frontiers of Engineering Management · doi:10.15302/j-fem-2016049 · Cited by 6
“Also, the tail gas stream was heated/cooled to 40°C before entering the PSA unit following the work by Grande (2012), who reported that the optimum absorption temperature for PSA is about 32°C–49°C.”
MethodGas Transport Mechanisms and Applications Through Graphene‐Based Membranes
Yang, J., Zhuang, Z., Wu, N., Zhang, D., Feng, B., Hou, D., & Wang, L. (2025) · Small · doi:10.1002/smll.202502473 · Cited by 8
Delikonstantis, E., Papaioannou, I., Geem, K. M. V., & Stefanidis, G. D. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2023.117008 · Cited by 5
Berezovsky, V. V., & Öberg, S. (2018) · Adsorption · doi:10.1007/s10450-018-9948-z · Cited by 7
“The pressure range 102–106 Pa is of greatest interest in terms of practical use, see Grande (2012) and references therein.”
BackgroundTan, Z. (2014) · Green energy and technology · doi:10.1007/978-981-287-212-8_12 · Cited by 5
Hydrogen Purification and Technologies
Haghighatjoo, F., Lak, S. Z., & Rahimpour, M. R. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-93940-9.00210-3 · Cited by 5
Abdollahi, M., Fatemi, S., Sadri, A., & Fakhroleslam, M. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.135214 · Cited by 4
Avola, T., Cavallaro, G. P., Diamanti, M. V., & Meroni, D. (2026) · Thermal advances. · doi:10.1016/j.thradv.2026.100099 · Cited by 7
Small-scale medical oxygen production unit using PSA technology: modeling and sensitivity analysis
Benkirane, L., Samid, A., & Chafik, T. (2023) · Journal of Medical Engineering & Technology · doi:10.1080/03091902.2024.2331693 · Cited by 4
“In 2012, Grande’s work highlighted advances in the basic principles of PSA [6], focusing on various engineering approaches that have led to continuous improvements in PSA performance.”
BackgroundBokare, M., Bano, S., Antony, P. S., Pal, S., & Biniwale, R. B. (2019) · Adsorption · doi:10.1007/s10450-019-00170-x · Cited by 5
“…Pollution & Transport Modelling Division, Indian Institute of Tropical Meteorology, Pune 411008, India 4 Present Address: Department of Botany, Goa University, Taleigao Plateau 403206, India 1 3 particularly preferred where trace amounts of CO2 are acceptable (Grande 2012; Oreggioni 2015).”
BackgroundOptimization of an Electrochemical Gas Separation and Inerting System
Aryal, U. R., & Prasad, A. K. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac76e1 · Cited by 6
Jamdade, S., Gurnani, R., Fang, H., Boulfelfel, S. E., Ramprasad, R., & Sholl, D. S. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c03544 · Cited by 4
Lahrami, Z. Z. (2025) · Applied Physics A · doi:10.1007/s00339-025-08824-0 · Cited by 4
Bora, D., Barbora, L., Borah, A. J., & Mahanta, P. (2021) · Energy, environment, and sustainability · doi:10.1007/978-981-16-1513-9_5 · Cited by 5
Tan, S. J., & Chew, J. W. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c03034 · Cited by 4
Shrivastava, S., Verma, A., Ramkumar, J., & Aryal, R. (2023) · Engineering Research Express · doi:10.1088/2631-8695/ad1215 · Cited by 5
Possibility of Combustion Furnace Operation with Oxygen-Enriched Gas from Nitrogen Generator
Ming, X., Borgnakke, D. S., Campos, M. A., Olszewski, P., Atreya, A., & Borgnakke, C. (2013) · Cited by 4
Dynamics of Water Adsorption from Butanol–Water Vapor in a Biosorbent Packed Column
Huang, Q., Dalai, A. K., Park, J., Diaz, A. M., Kang, H., & Niu, C. H. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b03377 · Cited by 5
Devaraj, T., Mani, Y., Aathika, S., Palaniyandi, S., Baskar, G., & Sivanesan, S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-323-85269-2.00009-5 · Cited by 5
Recent advances in carbon-based materials for carbon dioxide capture and separation applications
Singh, A., Chaturvedi, K. R., & Sharma, T. (2025) · Petroleum Science and Technology · doi:10.1080/10916466.2025.2538735 · Cited by 4
Polymeric adsorbents for gas adsorption
Penchah, H. R., & Maleki, F. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99746-1.00005-7 · Cited by 4
Aneja, R., Chauhan, A., Chauhan, T., Sharma, C., & Saini, V. K. (2024) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2024.129356 · Cited by 3
Khaerudini, D. S., Arham, & Alva, S. (2020) · Advances in Natural Sciences Nanoscience and Nanotechnology · doi:10.1088/2043-6254/ab798e · Cited by 3
3D model of a Monolithic Honeycomb Adsorber for Electric Swing Adsorption for Carbon Dioxide Capture
Đukic, I., Dučić, M. J., Nikačević, N. M., & Petkovska, M. T. (2020) · JOURNAL OF ENGINEERING & PROCESSING MANAGEMENT · doi:10.7251/jepm2001001d · Cited by 3
Adsorbtion Equipment Energy Efficiency Increase
Риполь-сарагоси, Т. Л., & Риполь-сарагоси, Л. Ф. (2020) · International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) · doi:10.1109/fareastcon50210.2020.9271276 · Cited by 3
“Next, using the data of the Table 2, let’s render graphic visualization of the dependences between power losses at engine’s drive and adsorbent type for different atmospheric air relative humidity [6,7,8].”
Method
Metadata
- Authors
- Grande, C. A.
- Affiliations
- SINTEF (NO)
- Corresponding author
- Grande, Carlos A.
- ORCID
- Grande, Carlos A.
- Venue
- ISRN Chemical Engineering
- Publisher
- Wiley
- Published
- 2012-12-03
- Volume
- 2012
- Pages
- 1-13
- ISSN
- 2090-861X (ISSN-L)
- OpenAlex
- W2101241053
- Semantic Scholar
- af8f30638e0caa5e44ee91178c3af34001091771
- Cited by
- 285
- References
- 216
- Citations by year
- 2026: 25 · 2025: 34 · 2024: 27 · 2023: 24 · 2022: 42 · 2021: 26 · 2020: 22 · 2019: 21 · 2018: 14 · 2017: 12 · 2016: 11 · 2015: 12 · 2014: 13 · 2013: 2
- FWCI
- 13.21
- Type
- journal article
- Language
- en
- Open access
- diamond
- doi.org
- Locations
- ISRN Chemical Engineering (publishedVersion, cc-by)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane Separation and Gas Transport
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Keywords
- pressure swing adsorption, gas separation, adsorbents, air separation, gas drying, hydrogen purification, methane purification, biogas upgrading, natural gas processing, process engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.