Advances in Pressure Swing Adsorption for Gas Separation
Open accessThe DOI matches its Crossref record; 157 of the 216 references it cites were found in a registry or an index.
Abstract
Pressure swing adsorption (PSA) is a well-established gas separation technique in air separation, gas drying, and hydrogen purification separation. Recently, PSA technology has been applied in other areas like methane purification from natural and biogas and has a tremendous potential to expand its utilization. It is known that the adsorbent material employed in a PSA process is extremely important in defining its properties, but it has also been demonstrated that process engineering can improve the performance of PSA units significantly. This paper aims to provide an overview of the fundamentals of PSA process while focusing specifically on different innovative engineering approaches that contributed to continuous improvement of PSA performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1 Schematic design of the first two-column pressure swing adsorption unit and valve sequencing for different steps in the cycle [1].](https://figures.cochat.ai/paper-figures/a153b9bb50094d0db58df2abc1ef2dec/advances-in-pressure-swing-adsorption-for-gas-separation-figure-1.png)



















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“the large flexibility of PSA is the main advantage of this process, which may because of this reason, it has a broad applications in the various areas [21,50].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [50]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242 · cited 1×
“Figure 1: Schematic design of the first two-column pressure swing adsorption unit and valve sequencing for different steps in the cycle [1].”
BackgroundTriblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundA New Zirconium Inorganic Building Brick Forming Metal Organic Frameworks with Exceptional Stability
Cavka, J. H., Jakobsen, S., Olsbye, U., Guillou, N., Lamberti, C., Bordiga, S., & Lillerud, K. P. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8057953 · Cited by 7,336 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundThermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
Metal–organic frameworks: a new class of porous materials
Rowsell, J. L. C., & Yaghi, O. M. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.03.034 · Cited by 2,963
Synthesis of New, Nanoporous Carbon with Hexagonally Ordered Mesostructure
Jun, S., Joo, S. H., Ryoo, R., Kruk, M., Jaroniec, M., Liu, Z., Ohsuna, T., & Terasaki, O. (2000) · Journal of the American Chemical Society · doi:10.1021/ja002261e · Cited by 2,424 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundMetal–organic frameworks—prospective industrial applications
Mueller, U., Schubert, M., Teich, F., Puetter, H., Schierle-Arndt, K., & Pastré, J. (2006) · J. Mater. Chem. · doi:10.1039/b511962f · Cited by 2,325 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundWeiner, J., & Ho, P.-T. (2003) · Wiley eBooks · Cited by 2,020
Adsorption Analysis: Equilibria and Kinetics: (With CD Containing Computer Matlab Programs)
Do, D. D. (1998) · Series on Chemical Engineering · doi:10.1142/p111 · Cited by 1,919 · cited 2×
“There are several pristine works that explain this phenomenon in detail [1–18].”
BackgroundLuz Martínez, S., Romero, R., López, J. C., Romero, A., Sánchez Mendieta, V., & Natividad, R. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1006867 · Cited by 1,669
Computers and Chemical Engineering
Biegler, L. T., & Zavala, V. M. (2008) · Cited by 1,389
Diffusion in Zeolites and Other Microporous Solids
Kärger, J., & Ruthven, D. M. (1992) · Medical Entomology and Zoology · Cited by 1,195
(1995) · Filtration & Separation · doi:10.1016/s0015-1882(97)84188-2 · Cited by 1,169
(1996) · The Kluwer International Series in Engineering and Computer Science · doi:10.1007/978-1-4613-1375-5 · Cited by 703
A titanosilicate molecular sieve with adjustable pores for size-selective adsorption of molecules
Kuznicki, S. M., Bell, V. A., Nair, S., Hillhouse, H. W., Jacubinas, R. M., Braunbarth, C. M., Toby, B. H., & Tsapatsis, M. (2001) · Nature · doi:10.1038/35089052 · Cited by 616 · cited 1×
“A special kind of titanosilicates, ETS-4, cation exchanged with alkaliearth metals can be used for kinetic separations [35, 41, 174, 175].”
BackgroundThe use of steam and CO2 as activating agents in the preparation of activated carbons
Rodríguez-Reinoso, F., Molina-Sabio, M., & González, M. T. (1995) · Carbon · doi:10.1016/0008-6223(94)00100-e · Cited by 600 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundDietzel, P. D. C., Morita, Y., Blom, R., & Fjellvåg, H. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200501508 · Cited by 591
Adsorption calculations and modeling
Tien, C. (1994) · Cited by 584
Purification of Hydrogen by Pressure Swing Adsorption
SIRCAR, S., & GOLDEN, T. C. (2000) · Separation Science and Technology · doi:10.1081/ss-100100183 · Cited by 570 · cited 2×
“Over the years it has been demonstrated that PSA technology can be used in a large variety of applications: hydrogen purification [58–72], air separation [57, 73– 80], OBOGS (on-board gas generation system) [81], CO2 removal [82–84], noble gases (He, Xe, Ar) purification [85– 87], CH4 upgrading [31, 34, 37, 40, 42, 88…”
BackgroundChue, K. T., Kim, J. N., Yoo, Y. J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499 · cited 2×
“Over the years it has been demonstrated that PSA technology can be used in a large variety of applications: hydrogen purification [58–72], air separation [57, 73– 80], OBOGS (on-board gas generation system) [81], CO2 removal [82–84], noble gases (He, Xe, Ar) purification [85– 87], CH4 upgrading [31, 34, 37, 40, 42, 88…”
BackgroundPolanyi, M. (1932) · Trans. Faraday Soc. · doi:10.1039/tf9322800316 · Cited by 473 · cited 2×
“[2] M.”
BackgroundNatural gas treating by selective adsorption: Material science and chemical engineering interplay
Tagliabue, M., Farrusseng, D., Valencia, S., Aguado, S., Ravon, U., Rizzo, C., Corma, A., & Mirodatos, C. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.010 · Cited by 471 · cited 1×
“Utilization of PSA for natural gas upgrading (CH4-CO2 separation basically) still also remains a challenge [229, 230].”
BackgroundAdsorption technology and design
Thomas, W. J., & Crittenden, B. D. (1998) · Cited by 441
CO2 capture by adsorption: Materials and process development
Chaffee, A. L., Knowles, G. P., Liang, Z., Zhang, J., Xiao, P., & Webley, P. A. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00031-x · Cited by 416 · cited 2×
“Over the years it has been demonstrated that PSA technology can be used in a large variety of applications: hydrogen purification [58–72], air separation [57, 73– 80], OBOGS (on-board gas generation system) [81], CO2 removal [82–84], noble gases (He, Xe, Ar) purification [85– 87], CH4 upgrading [31, 34, 37, 40, 42, 88…”
BackgroundA Mesh‐Adjustable Molecular Sieve for General Use in Gas Separation
Ma, S., Sun, D., Wang, X., & Zhou, H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604353 · Cited by 380
Humphrey, J. L., & Keller, G. (1997) · McGraw-Hill eBooks · Cited by 351
Sircar, S. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0109758 · Cited by 319
Separation of CH4/CO2/N2 mixtures by layered pressure swing adsorption for upgrade of natural gas
Cavenati, S., Grande, C. A., & Rodrigues, A. E. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.01.023 · Cited by 302 · cited 2×
“This approach has also been applied in other separations [66, 70, 79, 154–160].”
ResultSelf-citationMicroporous Titanosilicates and other Novel Mixed Octahedral-Tetrahedral Framework Oxides
Rocha, J., & Anderson, M. W. (2000) · European Journal of Inorganic Chemistry · doi:10.1002/(sici)1099-0682(200005)2000:5<801::aid-ejic801>3.0.co;2-e · Cited by 281 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundOptimization of a Pressure-Swing Adsorption Process Using Zeolite 13X for CO2 Sequestration
Ko, D., Siriwardane, R., & Biegler, L. T. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0204540 · Cited by 257 · cited 2×
“For the selected cycle, all the step times, blowdown pressure, and flowrates of rinse and purge steps should be determined [25, 188–192].”
BackgroundCapture of CO2 from flue gas streams with zeolite 13X by vacuum-pressure swing adsorption
Xiao, P., Zhang, J., Webley, P., Li, G., Singh, R., & Todd, R. (2008) · Adsorption · doi:10.1007/s10450-008-9128-7 · Cited by 248 · cited 2×
“It has been potentially demonstrated that CO2 can be captured using PSA [224–227] but more fundamental and long-term pilot plant studies are required to properly benchmark this technique against amines.”
BackgroundAdsorption equilibrium data handbook
Valenzuela, D. P., & Myers, A. L. (1989) · Cited by 244
Kinetic separation of methane—carbon dioxide mixture by adsorption on molecular sieve carbon
Kapoor, A., & Yang, R. T. (1989) · Chemical Engineering Science · doi:10.1016/0009-2509(89)80014-4 · Cited by 237
Habgood, H. W. (1958) · Canadian Journal of Chemistry · doi:10.1139/v58-204 · Cited by 211 · cited 1×
“The “kinetic processes” were recognized soon [28].”
Optimum structured adsorbents for gas separation processes
Rezaei, F., & Webley, P. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.08.029 · Cited by 210 · cited 2×
“Alternatively, it can be shaped into honeycomb monolithic structures resulting in reduced pressure drop of the system [44–54].”
BackgroundLopes, F. V. S., Grande, C. A., & Rodrigues, A. E. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.10.034 · Cited by 207 · cited 1×
“When several columns are employed, several pressure equalization steps can be done [114–116] and as a consequence, the overall recovery is increased [65, 117, 118].”
MethodSelf-citationMetal Organic Framework Adsorbent for Biogas Upgrading
Cavenati, S., Grande, C. A., Rodrigues, A. E., Kiener, C., & Müller, U. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8005269 · Cited by 207 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundSelf-citationMulti-bed Vacuum Pressure Swing Adsorption for carbon dioxide capture from flue gas
Liu, Z., Grande, C. A., Li, P., Yu, J., & Rodrigues, A. E. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.07.037 · Cited by 196
Self-citationSeparation process engineering
Wankat, P. C. (2007) · Cited by 195
Clinoptilolites for nitrogen/methane separation
Jayaraman, A., Hernandez-Maldonado, A. J., Yang, R. T., Chinn, D., Munson, C. L., & Mohr, D. H. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2003.10.030 · Cited by 194 · cited 2×
“Most recently, several inorganic materials have proved to be useful for kinetic separations [34, 36, 168–173].”
BackgroundPropylene/propane separation by vacuum swing adsorption using 13X zeolite
Silva, F. A. D., & Rodrigues, A. E. (2001) · AIChE Journal · doi:10.1002/aic.690470212 · Cited by 185 · cited 3×
“” Although the rinse step aimed to provide a solution to concentration of low-per cent light compounds, it has been widely used for other purposes: concentration of the more adsorbed species [32, 120–122, 129–132].”
BackgroundMethodA superstructure‐based optimal synthesis of PSA cycles for post‐combustion CO2 capture
Agarwal, A., Biegler, L. T., & Zitney, S. E. (2010) · AIChE Journal · doi:10.1002/aic.12107 · Cited by 182
Needs, status, techniques and problems with binary gas adsorption experiments
Talu, O. (1998) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(98)00048-7 · Cited by 173 · cited 2×
“[15] O.”
BackgroundA General Package for the Simulation of Cyclic Adsorption Processes
Da Silva, F. A., Silva, J. A., & Rodrigues, A. E. (1999) · Adsorption · doi:10.1023/a:1008974908427 · Cited by 166
Adsorption dynamics of a layered bed PSA for H2 recovery from coke oven gas
Yang, J., & Lee, C. (1998) · AIChE Journal · doi:10.1002/aic.690440610 · Cited by 162 · cited 2×
“This approach has also been applied in other separations [66, 70, 79, 154–160].”
ResultOn the Optimisation of Periodic Adsorption Processes
Nilchan, S., & Pantelides, C. C. (1998) · Adsorption · doi:10.1023/a:1008823102106 · Cited by 156 · cited 2×
“Although the model can be solved by numerical methods [55, 113, 178–183], there are several commercial programs that can be already used for that purpose: ASPEN, COMSOL, gPROMS, PROSIM, and so forth [18, 184–187].”
MethodCarbon molecular sieves: production from coal and application in gas separation
Jüntgen, H., Knoblauch, K., & Harder, K. (1981) · Fuel · doi:10.1016/0016-2361(81)90144-7 · Cited by 151 · cited 3×
“Another example of kinetic materials is the carbon molecular sieves (CMS) [29–31, 33, 38, 163–167].”
BackgroundPropane/Propylene Separation by Pressure Swing Adsorption Using Zeolite 4A
Grande, C. A., & Rodrigues, A. E. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050671b · Cited by 141 · cited 3×
“[122] C.”
BackgroundMethodSelf-citationTwo-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
Shen, C., Liu, Z., Li, P., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202097y · Cited by 138
Adsorber dynamics and optimal design of layered beds for multicomponent gas adsorption
Park, J., Kim, J., Cho, S., Kim, J.-D., & Yang, R. T. (1998) · Chemical Engineering Science · doi:10.1016/s0009-2509(98)00196-1 · Cited by 135 · cited 2×
“[157] J.”
ResultAdsorption rate on molecular sieving carbon by chromatography
Chihara, K., Suzuki, M., & Kawazoe, K. (1978) · AIChE Journal · doi:10.1002/aic.690240212 · Cited by 127 · cited 3×
“Another example of kinetic materials is the carbon molecular sieves (CMS) [29–31, 33, 38, 163–167].”
BackgroundMolecular sieve sorbents for kinetic separation of propane/propylene
Padin, J., Rege, S. U., Yang, R. T., & Cheng, L. S. (2000) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00099-3 · Cited by 126 · cited 3×
“Most recently, several inorganic materials have proved to be useful for kinetic separations [34, 36, 168–173].”
BackgroundGrande, C. A., & Rodrigues, A. E. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie061341+ · Cited by 126 · cited 2×
“[95] C.”
BackgroundSelf-citationShape Selectivity in Adsorption on the All-Silica DD3R
Zhu, W., Kapteijn, F., Moulijn, J. A., den Exter, M. C., & Jansen, J. C. (2000) · Langmuir · doi:10.1021/la9914007 · Cited by 124 · cited 2×
“Most recently, several inorganic materials have proved to be useful for kinetic separations [34, 36, 168–173].”
BackgroundEvaluation of dual-bed pressure swing adsorption for CO2 recovery from boiler exhaust gas
Takamura, Y. (2001) · Separation and Purification Technology · doi:10.1016/s1383-5866(01)00151-4 · Cited by 123 · cited 2×
“A solution that is already in use and should be more explored is the dual PSA concept [231–235].”
Pressure swing adsorption: Development of an equilibrium theory for gas separations
Knaebel, K. S., & Hill, F. B. (1985) · Chemical Engineering Science · doi:10.1016/0009-2509(85)85139-3 · Cited by 122 · cited 2×
“Information about the adsorption equilibrium of the different species is vital to design and model adsorption processes [19–27].”
BackgroundGas Adsorption Equilibria: Experimental Methods and Adsorption Isotherms
Keller, J., & Staudt, R. (2005) · CERN Document Server (European Organization for Nuclear Research) · Cited by 122
Hydrogen purification from refinery fuel gas by pressure swing adsorption
Malek, A., & Farooq, S. (1998) · AIChE Journal · doi:10.1002/aic.690440906 · Cited by 116 · cited 2×
“[64] A.”
BackgroundSantos, M. P. S., Grande, C. A., & Rodrigues, A. E. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie100757u · Cited by 116
Self-citationGascón, J., Blom, W., van Miltenburg, A., Ferreira, A. F. P., Berger, R. J., & Kapteijn, F. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.02.038 · Cited by 114 · cited 2×
“Most recently, several inorganic materials have proved to be useful for kinetic separations [34, 36, 168–173].”
BackgroundAdsorption and diffusion of nitrogen and oxygen in a carbon molecular sieve
Ruthven, D. M., Raghavan, N. S., & Hassan, M. M. (1986) · Chemical Engineering Science · doi:10.1016/0009-2509(86)87105-6 · Cited by 113 · cited 1×
“[76] D.”
Reynolds, S. P., Ebner, A. D., & Ritter, J. A. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051232f · Cited by 113 · cited 2×
“[132] S.”
BackgroundNumerical Analysis on the Power Consumption of the PSA Process for Recovering CO2 from Flue Gas
Park, J.-H., Beum, H.-T., Kim, J.-N., & Cho, S.-H. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010716i · Cited by 113 · cited 2×
“[83] J.”
BackgroundDiffusion in ion‐exchanged clinoptilolites
Ackley, M. W., & Yang, R. T. (1991) · AIChE Journal · doi:10.1002/aic.690371107 · Cited by 111 · cited 2×
“Most recently, several inorganic materials have proved to be useful for kinetic separations [34, 36, 168–173].”
BackgroundPast Progress and Future Challenges in Adsorption Research
Ruthven, D. M. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000060d · Cited by 108 · cited 1×
“PSA technology can be considered a mature technology in air separation, drying, and hydrogen purification, but there is plenty of work to do to establish this technique in other fields [223].”
BackgroundHydrogen production by hybrid SMR–PSA–SSF membrane system
Sircar, S. (1999) · Separation and Purification Technology · doi:10.1016/s1383-5866(99)00021-0 · Cited by 107 · cited 2×
“Over the years it has been demonstrated that PSA technology can be used in a large variety of applications: hydrogen purification [58–72], air separation [57, 73– 80], OBOGS (on-board gas generation system) [81], CO2 removal [82–84], noble gases (He, Xe, Ar) purification [85– 87], CH4 upgrading [31, 34, 37, 40, 42, 88…”
BackgroundJee, J.-G., Kim, M.-B., & Lee, C.-H. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0005046 · Cited by 107 · cited 3×
“[70] J.”
BackgroundResultSeparation of nitrogen and methane via periodic adsorption
Turnock, P. H., & Kadlec, R. H. (1971) · AIChE Journal · doi:10.1002/aic.690170219 · Cited by 106 · cited 1×
“This alternative was suggested many years ago [197] and has started been implemented in the 80s [198].”
BackgroundKim, M.-B., Bae, Y., Choi, D.-K., & Lee, C. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0511074 · Cited by 99 · cited 3×
“Over the years it has been demonstrated that PSA technology can be used in a large variety of applications: hydrogen purification [58–72], air separation [57, 73– 80], OBOGS (on-board gas generation system) [81], CO2 removal [82–84], noble gases (He, Xe, Ar) purification [85– 87], CH4 upgrading [31, 34, 37, 40, 42, 88…”
BackgroundFast solution-adaptive finite volume method for PSA/VSA cycle simulation; 1 single step simulation
Webley, P. A., & He, J. (2000) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(99)00320-8 · Cited by 96 · cited 2×
“[182] P.”
MethodIntensification of pressure swing adsorption processes
Rota, R., & Wankat, P. C. (1990) · AIChE Journal · doi:10.1002/aic.690360903 · Cited by 94 · cited 1×
“The most common PI found in PSA processes are listed in Table 1 [134].”
BackgroundNa, B.-K., Lee, H., Koo, K.-K., & Song, H. K. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0109509 · Cited by 94 · cited 2×
“[131] B.”
BackgroundSeparation of methane—nitrogen mixtures by pressure swing adsorption using a carbon molecular sieve
Fatehi, A. I., Loughlin, K. F., & Hassan, M. M. (1995) · Gas Separation & Purification · doi:10.1016/0950-4214(95)98227-c · Cited by 93 · cited 3×
“Another example of kinetic materials is the carbon molecular sieves (CMS) [29–31, 33, 38, 163–167].”
BackgroundRecent Advances in Simulation and Optimal Design of Pressure Swing Adsorption Systems
Biegler, L. T., Jiang, L., & Fox, V. G. (2005) · Separation & Purification Reviews · doi:10.1081/spm-120039562 · Cited by 92
Performance analysis of four‐bed H2 PSA process using layered beds
Park, J., Kim, J., & Cho, S. (2000) · AIChE Journal · doi:10.1002/aic.690460413 · Cited by 90 · cited 2×
“[68] J.”
BackgroundSynthesis of Periodic Mesoporous Silica Thin Films
Martin, J. E., Anderson, M. T., Odinek, J. G., & Newcomer, P. P. (1997) · Langmuir · doi:10.1021/la960714g · Cited by 90
Applications of Pressure Swing Adsorption Technology
Voß, C. (2005) · Adsorption · doi:10.1007/s10450-005-5979-3 · Cited by 87 · cited 2×
“The PSA processes are normally associated to low energy consumption when compared to other technologies [12, 55, 100–102].”
BackgroundSimulation and optimal design of multiple‐bed pressure swing adsorption systems
Jiang, L., Fox, V. G., & Biegler, L. T. (2004) · AIChE Journal · doi:10.1002/aic.10223 · Cited by 86 · cited 2×
“[183] L.”
MethodEffects of carbon‐to‐zeolite ratio on layered bed H2 PSA for coke oven gas
Lee, C., Yang, J., & Ahn, H. (1999) · AIChE Journal · doi:10.1002/aic.690450310 · Cited by 83 · cited 3×
“Over the years it has been demonstrated that PSA technology can be used in a large variety of applications: hydrogen purification [58–72], air separation [57, 73– 80], OBOGS (on-board gas generation system) [81], CO2 removal [82–84], noble gases (He, Xe, Ar) purification [85– 87], CH4 upgrading [31, 34, 37, 40, 42, 88…”
BackgroundResultDiagne, D., Goto, M., & Hirose, T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00048a020 · Cited by 79 · cited 2×
“[130] D.”
BackgroundAdsorption of propane and propylene in zeolite 4A honeycomb monolith
Grande, C. A., Cavenati, S., Bárcia, P. S., Hammer, J., Fritz, H.-G., & Rodrigues, A. E. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2005.11.058 · Cited by 78 · cited 2×
“Alternatively, it can be shaped into honeycomb monolithic structures resulting in reduced pressure drop of the system [44–54].”
BackgroundSelf-citationRevisiting Transport of Gases in the Micropores of Carbon Molecular Sieves
Qinglin, H., Sundaram, S. M., & Farooq, S. (2003) · Langmuir · doi:10.1021/la026451+ · Cited by 78 · cited 2×
“Another example of kinetic materials is the carbon molecular sieves (CMS) [29–31, 33, 38, 163–167].”
BackgroundVacuum Pressure Swing Adsorption to Produce Polymer-Grade Propylene
Grande, C. A., Poplow, F., & Rodrigues, A. E. (2010) · Separation Science and Technology · doi:10.1080/01496391003652767 · Cited by 76 · cited 1×
“Also, olefin-paraffin separation by adsorption was quite studied, but the energetic consumption of the separation by adsorption is still comparable to distillation [228].”
BackgroundSelf-citationLayered Vacuum Pressure-Swing Adsorption for Biogas Upgrading
Grande, C. A., & Rodrigues, A. E. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070942d · Cited by 73 · cited 1×
“Consecutive layers of adsorbents can also be used to improve the productivity of kinetic adsorbents by adding a material that can be easily regenerated after the kinetic adsorbent [161, 162].”
BackgroundSelf-citationValdés-Solı́s, T., Linders, M. J. G., Kapteijn, F., Marbán, G., & Fuertes, A. B. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2004.03.025 · Cited by 70 · cited 2×
“[50] T.”
BackgroundThe Potential of Energy Saving by Gas-Phase Adsorption Processes
Mersmann, A., Fill, B., Hartmann, R., & Maurer, S. (2000) · Chemical Engineering & Technology · doi:10.1002/1521-4125(200011)23:11<937::aid-ceat937>3.0.co;2-p · Cited by 70 · cited 2×
“The PSA processes are normally associated to low energy consumption when compared to other technologies [12, 55, 100–102].”
BackgroundEffect of Ion Exchange and Dehydration Temperature on the Adsorption and Diffusion of Gases in ETS-4
Marathe, R. P., Mantri, K., Srinivasan, M. P., & Farooq, S. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049818+ · Cited by 69 · cited 2×
“Many studies have confirmed that CH4 can be excluded from the structure while gases like H2S, CO2, and specially N2 can be adsorbed [43, 176, 177].”
BackgroundAir Separation by a Small-Scale Two-Bed Medical O2 Pressure Swing Adsorption
Jee, J.-G., Lee, J., & Lee, C. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010101l · Cited by 69 · cited 1×
“However, the concept of RPSA has opened the possibility of portable devices with quite small size that can be used for ambulatory patients with chronic lung diseases [78, 215].”
BackgroundLandfill Gas: From Rubbish to Resource
Knaebel, K. S., & Reinhold, H. E. (2003) · Adsorption · doi:10.1023/a:1023871415711 · Cited by 68 · cited 2×
“[94] K.”
BackgroundParametric Study of a Pressure Swing Adsorption Process
Waldron, W. E., & Sircar, S. (2000) · Adsorption · doi:10.1023/a:1008925703871 · Cited by 67 · cited 2×
“[191] W.”
BackgroundGas Purification by Pressure Swing Adsorption
Tondeur, D., & Wankat, P. C. (1985) · Separation and Purification Methods · doi:10.1080/03602548508068420 · Cited by 63
Fast-cycling VPSA for hydrogen purification
Lopes, F. V. S., Grande, C. A., & Rodrigues, A. E. (2011) · Fuel · doi:10.1016/j.fuel.2011.07.005 · Cited by 59
Self-citationKinetic separation of methane/carbon dioxide by molecular sieve carbons
Jayaraman, A., Chiao, A. S., Padin, J., Yang, R. T., & Munson, C. L. (2002) · Separation Science and Technology · doi:10.1081/ss-120004450 · Cited by 57 · cited 3×
“Another example of kinetic materials is the carbon molecular sieves (CMS) [29–31, 33, 38, 163–167].”
BackgroundDong, F., Lou, H., Kodama, A., Goto, M., & Hirose, T. (1999) · Separation and Purification Technology · doi:10.1016/s1383-5866(98)00122-1 · Cited by 55 · cited 1×
“For the case of separation of a ternary mixture, feeding and one product withdrawal in intermediate positions of the column was also suggested, with a PSA design resembling the Petliuk scheme for distillation [126, 127].”
MethodRivera-Ramos, M. E., Ruiz-Mercado, G. J., & Hernández-Maldonado, A. J. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie071309v · Cited by 55 · cited 2×
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundDesign of a two‐step pulsed pressure‐swing adsorption‐based oxygen concentrator
Vemula, R. R., Farooq, S., & Krantz, W. B. (2009) · AIChE Journal · doi:10.1002/aic.11953 · Cited by 55 · cited 2×
“Although the model can be solved by numerical methods [55, 113, 178–183], there are several commercial programs that can be already used for that purpose: ASPEN, COMSOL, gPROMS, PROSIM, and so forth [18, 184–187].”
MethodLiu, Z., Ling, L., Qiao, W., & Liü, L. (1999) · Carbon · doi:10.1016/s0008-6223(98)00242-5 · Cited by 54
Equilibrium theory analysis of rectifying PSA for heavy component production
Ebner, A. D., & Ritter, J. A. (2002) · AIChE Journal · doi:10.1002/aic.690480810 · Cited by 54 · cited 2×
“[26] A.”
BackgroundOptimization of Multibed Pressure Swing Adsorption Processes
Nikolić, D., Kikkinides, E. S., & Georgiadis, M. C. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801357a · Cited by 53 · cited 2×
“Although the model can be solved by numerical methods [55, 113, 178–183], there are several commercial programs that can be already used for that purpose: ASPEN, COMSOL, gPROMS, PROSIM, and so forth [18, 184–187].”
MethodEquilibrium theory analysis of dual reflux PSA for separation of a binary mixture
Ebner, A. D., & Ritter, J. A. (2004) · AIChE Journal · doi:10.1002/aic.10191 · Cited by 53 · cited 2×
“[27] A.”
BackgroundPressure drop effects in the pressurization and blowdown steps of pressure swing adsorption
Sundaram, N., & Wankat, P. C. (1988) · Chemical Engineering Science · doi:10.1016/0009-2509(88)87133-1 · Cited by 50 · cited 2×
“[188] N.”
BackgroundDasgupta, S., Biswas, N., Aarti, A., Gode, N. G., Divekar, S., Nanoti, A., & Goswami, A. N. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.10.007 · Cited by 50 · cited 2×
“It has been potentially demonstrated that CO2 can be captured using PSA [224–227] but more fundamental and long-term pilot plant studies are required to properly benchmark this technique against amines.”
BackgroundGeneric Modeling Framework for Gas Separations Using Multibed Pressure Swing Adsorption Processes
Nikolic, D., Giovanoglou, A., Georgiadis, M. C., & Kikkinides, E. S. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0712582 · Cited by 49 · cited 2×
“Although the model can be solved by numerical methods [55, 113, 178–183], there are several commercial programs that can be already used for that purpose: ASPEN, COMSOL, gPROMS, PROSIM, and so forth [18, 184–187].”
MethodIdentification of Transport Mechanism in Adsorbent Micropores from Column Dynamics
Farooq, S., Qinglin, H., & Karimi, I. A. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0104621 · Cited by 48 · cited 2×
“Another example of kinetic materials is the carbon molecular sieves (CMS) [29–31, 33, 38, 163–167].”
BackgroundPressure Swing Adsorption: Equilibrium Theory for Purification and Enrichment
LeVan, M. D. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00047a014 · Cited by 47 · cited 2×
“[20] M.”
BackgroundSimulation of a new hybrid membrane/pressure swing adsorption process for gas separation
Esteves, I. A. A. C., & Mota, J. P. B. (2002) · Desalination · doi:10.1016/s0011-9164(02)00713-0 · Cited by 46 · cited 2×
“Over the years it has been demonstrated that PSA technology can be used in a large variety of applications: hydrogen purification [58–72], air separation [57, 73– 80], OBOGS (on-board gas generation system) [81], CO2 removal [82–84], noble gases (He, Xe, Ar) purification [85– 87], CH4 upgrading [31, 34, 37, 40, 42, 88…”
BackgroundThe Little Adsorption Book: A Practical Guide for Engineers and Scientists
Basmadjian, D. (1996) · Cited by 46
Zeolite Monoliths for Air Separation
Li, Y. Y., Perera, S. P., & Crittenden, B. D. (1998) · Process Safety and Environmental Protection · doi:10.1205/026387698525739 · Cited by 45 · cited 2×
“Alternatively, it can be shaped into honeycomb monolithic structures resulting in reduced pressure drop of the system [44–54].”
BackgroundOptimization of Medical PSA Units for Oxygen Production
Santos, J. C., Portugal, A. F., Magalhães, F. D., & Mendes, A. M. M. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0504809 · Cited by 45 · cited 2×
“Over the years it has been demonstrated that PSA technology can be used in a large variety of applications: hydrogen purification [58–72], air separation [57, 73– 80], OBOGS (on-board gas generation system) [81], CO2 removal [82–84], noble gases (He, Xe, Ar) purification [85– 87], CH4 upgrading [31, 34, 37, 40, 42, 88…”
BackgroundBackfill Cycle of a Layered Bed H2 PSA Process
Ahn, H., Lee, C., Seo, B., Yang, J., & Baek, K.-H. (1999) · Adsorption · doi:10.1023/a:1008973118852 · Cited by 45 · cited 1×
“The utilization of a pressurization using part of the purified gas had impact in the purity of the produced gas [108].”
BackgroundMultiple bed regenerative adsorption cycle using the monolithic carbon–ammonia pair
Critoph, R. E. (2002) · Applied Thermal Engineering · doi:10.1016/s1359-4311(01)00118-1 · Cited by 44 · cited 2×
“Alternatively, it can be shaped into honeycomb monolithic structures resulting in reduced pressure drop of the system [44–54].”
BackgroundHigh Recovery Cycles for Gas Separations by Pressure-Swing Adsorption
Kostroski, K. P., & Wankat, P. C. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060566h · Cited by 40 · cited 2×
“[125] K.”
ResultDynamic behaviour of layered columns in pressure swing adsorption
Chlendi, M., & Tondeur, D. (1995) · Gas Separation & Purification · doi:10.1016/0950-4214(95)00005-v · Cited by 40 · cited 2×
“This approach has also been applied in other separations [66, 70, 79, 154–160].”
ResultPredictive Dynamic Model of a Small Pressure Swing Adsorption Air Separation Unit
Teague, K. G., & Edgar, T. F. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990181h · Cited by 39 · cited 1×
“Over the years it has been demonstrated that PSA technology can be used in a large variety of applications: hydrogen purification [58–72], air separation [57, 73– 80], OBOGS (on-board gas generation system) [81], CO2 removal [82–84], noble gases (He, Xe, Ar) purification [85– 87], CH4 upgrading [31, 34, 37, 40, 42, 88…”
BackgroundSeparation of a Five-Component Gas Mixture by Pressure Swing Adsorption
Cen, P., & Yang, R. T. (1985) · Separation Science and Technology · doi:10.1080/01496398508060701 · Cited by 37 · cited 2×
“Over the years it has been demonstrated that PSA technology can be used in a large variety of applications: hydrogen purification [58–72], air separation [57, 73– 80], OBOGS (on-board gas generation system) [81], CO2 removal [82–84], noble gases (He, Xe, Ar) purification [85– 87], CH4 upgrading [31, 34, 37, 40, 42, 88…”
BackgroundProduction of oxygen enriched air by rapid pressure swing adsorption
Sircar, S., & Hanley, B. F. (1995) · Adsorption · doi:10.1007/bf00707354 · Cited by 37 · cited 1×
“[202] S.”
Mass transfer in carbon molecular sieves—an interpretation of Langmuir kinetics
Srinivasan, R., Auvil, S. R., & Schork, J. M. (1995) · The Chemical Engineering Journal and the Biochemical Engineering Journal · doi:10.1016/0923-0467(94)02942-3 · Cited by 35 · cited 2×
“Another example of kinetic materials is the carbon molecular sieves (CMS) [29–31, 33, 38, 163–167].”
BackgroundAdsorption column blowdown: adiabatic equilibrium model for bulk binary gas mixtures
Kumar, R. (1989) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00095a017 · Cited by 35 · cited 2×
“[189] R.”
BackgroundAdsorption of small molecules on alkali-earth modified titanosilicates
Cavenati, S., Grande, C. A., Lopes, F. V. S., & Rodrigues, A. E. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.01.012 · Cited by 34 · cited 1×
“Many studies have confirmed that CH4 can be excluded from the structure while gases like H2S, CO2, and specially N2 can be adsorbed [43, 176, 177].”
BackgroundSelf-citationAnalysis of a piston PSA process for air separation
Rajendran, A., Farooq, S., & Ruthven, D. M. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(01)00374-8 · Cited by 33 · cited 1×
“[206] R.”
Utilization of Dual-PSA Technology for Natural Gas Upgrading and Integrated CO2 Capture
Grande, C. A., & Blom, R. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.06.004 · Cited by 29 · cited 1×
“Utilization of PSA for natural gas upgrading (CH4-CO2 separation basically) still also remains a challenge [229, 230].”
BackgroundSelf-citationArithmetic approach for complex PSA cycle scheduling
Mehrotra, A., Ebner, A. D., & Ritter, J. A. (2010) · Adsorption · doi:10.1007/s10450-010-9211-8 · Cited by 28 · cited 1×
“A graphical procedure to schedule PSA cycles was suggested [195, 196].”
MethodMixed-integer programming for pressure swing adsorption cycle scheduling
Smith, O. J., & Westerberg, A. W. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)80176-f · Cited by 28 · cited 2×
“[178] O.”
MethodLu, Z. P., LOUREIRO, J. M., Rodrigues, A. E., & LeVan, M. D. (1993) · Chemical Engineering Science · doi:10.1016/0009-2509(93)80129-e · Cited by 28 · cited 2×
“[190] Z.”
BackgroundMass‐transfer models for rapid pressure swing adsorption simulation
Todd, R. S., & Webley, P. A. (2006) · AIChE Journal · doi:10.1002/aic.10948 · Cited by 28 · cited 1×
“Under such conditions, the mathematical models used to simulate normal PSA processes may not work [210, 217]: mass and energy transfer description using simplifications like LDF (linear driving force) are not applicable.”
MethodDelgado, J. A., & Rodrigues, A. E. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.06.016 · Cited by 27 · cited 1×
“The result of the pressure equalization step is a direct improvement in the recovery of the light product [112, 113].”
BackgroundDual Pressure Swing Adsorption Units for Gas Separation and Purification
Grande, C. A., & Blom, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300341v · Cited by 27
Self-citationAdsorption of Gases on Carbon Molecular Sieves
Vyas, S. N., Patwardhan, S. R., Vijayalakshmi, S., & Ganesh, K. S. (1994) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1994.1421 · Cited by 26 · cited 2×
“Another example of kinetic materials is the carbon molecular sieves (CMS) [29–31, 33, 38, 163–167].”
BackgroundPredescu, L., Tezel, F. H., & Chopra, S. (1997) · Adsorption · doi:10.1007/bf01133003 · Cited by 25 · cited 2×
“Most recently, several inorganic materials have proved to be useful for kinetic separations [34, 36, 168–173].”
BackgroundTemperature-Programmed Adsorption and Characteristics of Honeycomb Hydrocarbon Adsorbers
Kim, D. J., Kim, J. W., Yie, J. E., & Moon, H. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020165b · Cited by 24
Simplified graphical approach for complex PSA cycle scheduling
Mehrotra, A., Ebner, A. D., & Ritter, J. A. (2011) · Adsorption · doi:10.1007/s10450-011-9326-6 · Cited by 23 · cited 1×
“A graphical procedure to schedule PSA cycles was suggested [195, 196].”
MethodYang, R. T., & Cen, P. L. (1986) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200032a009 · Cited by 23 · cited 2×
“The “heat effects” may be very important in designing a PSA unit [107] and should be taken into account in the design: laboratory or small-scale experiments are either isothermal or close to isothermal and the heat capacity of the wall is important while large-scale processes behave adiabatically.”
BackgroundPredictive dynamic model of single‐stage ultra‐rapid pressure swing adsorption
Kopaygorodsky, E., Guliants, V. V., & Krantz, W. B. (2004) · AIChE Journal · doi:10.1002/aic.10093 · Cited by 23 · cited 1×
“It has been proven that by using a honeycomb monolith, it is possible to reduce the pressure drop of the PSA process [209] and thus reduce the overall pressurization time.”
BackgroundNumerical simulation of a parallel-passage piston-driven PSA unit
Farooq, S., Thaeron, C., & Ruthven, D. M. (1998) · Separation and Purification Technology · doi:10.1016/s1383-5866(98)00042-2 · Cited by 22 · cited 3×
“When the total cycle time is smaller than 30 seconds, the process is normally called Rapid PSA (RPSA) [145, 179, 198– 214].”
MethodComparison of Radial- and Axial-Flow Rapid Pressure Swing Adsorption Processes
Huang, W.-C., & Chou, C.-T. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020129c · Cited by 21
Gorbach, A., Stegmaier, M., Eigenberger, G., Hammer, J., & Fritz, H. ‐. (2005) · Adsorption · doi:10.1007/s10450-005-5977-5 · Cited by 21
Pigorini, G., & LeVan, M. D. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9806949 · Cited by 19 · cited 2×
“[22] G.”
BackgroundA New Concept in the Design of Pressure-Swing Adsorption Processes for Multicomponent Gas Mixtures
Dong, F., Lou, H., Kodama, A., Goto, M., & Hirose, T. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie980323s · Cited by 18 · cited 1×
“For the case of separation of a ternary mixture, feeding and one product withdrawal in intermediate positions of the column was also suggested, with a PSA design resembling the Petliuk scheme for distillation [126, 127].”
MethodEquilibrium Theory for Pressure Swing Adsorption. 2. Purification and Enrichment in Layered Beds
Pigorini, G., & LeVan, M. D. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9607154 · Cited by 17 · cited 2×
“[21] G.”
BackgroundMechanisms of Molecular Mobility of Oxygen and Nitrogen in Carbon Molecular Sieves
Shen, D., Bülow, M., & Lemcoff, N. O. (2003) · Adsorption · doi:10.1023/a:1026239829164 · Cited by 16 · cited 2×
“Another example of kinetic materials is the carbon molecular sieves (CMS) [29–31, 33, 38, 163–167].”
BackgroundModelling NOx adsorption in a thin NaZSM-5 film supported on a cordierite monolith
Perdana, I., Creaser, D., Bendiyasa, I. M., Rochmadi, & Tyoso, B. W. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.04.012 · Cited by 16 · cited 2×
“Alternatively, it can be shaped into honeycomb monolithic structures resulting in reduced pressure drop of the system [44–54].”
BackgroundEffect of pressure equalization on power requirements in PSA systems
Warmuziński, K. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00060-x · Cited by 15
Pigorini, G., & LeVan, M. D. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie960716w · Cited by 15
Radial flow rapid pressure swing adsorption
Chiang, A. S. T., & Hong, M.-Y. (1995) · Adsorption · doi:10.1007/bf00705002 · Cited by 12 · cited 2×
“Another approach to PSA technology was carried out using radial columns [220–222].”
MethodYoshida, M., Ritter, J. A., Kodama, A., Goto, M., & Hirose, T. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0604573 · Cited by 11 · cited 1×
“Parallel equalization using valves at different column lengths were also suggested [124].”
MethodOptimal operation of rapid pressure swing adsorption with slop recycling
Betlem, B. H. L., Gotink, R. W. M., & Bosch, H.-S. (1998) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(98)00112-4 · Cited by 11 · cited 1×
“[203] B.”
Pigorini, G., & LeVan, M. D. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970731g · Cited by 10 · cited 2×
“[23] G.”
BackgroundInfluence of Gas-Solid Heat Transfer on Rapid PSA
Sircar, S. (2005) · Adsorption · doi:10.1007/s10450-005-5976-6 · Cited by 10
Lü, Y., Doong, S.-J., & Bülow, M. (2003) · Adsorption · doi:10.1023/a:1026228015051 · Cited by 9 · cited 2×
“This approach has also been applied in other separations [66, 70, 79, 154–160].”
ResultOn the Pseudomultiplicity of Pressure Swing Adsorption Periodic States
Sundaram, N., & Yang, R. T. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970522w · Cited by 9 · cited 3×
“When CSS is achieved, the performance of the cycles of the PSA is constant over time.”
BackgroundInfluentialL�, Y., Doong, S.-J., & B�low, M. (2005) · Adsorption · doi:10.1007/s10450-005-4812-3 · Cited by 9 · cited 2×
“This approach has also been applied in other separations [66, 70, 79, 154–160].”
ResultSerbezov, A. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(01)00121-x · Cited by 9
Production of Pipeline-Quality Natural Gas With the Molecular Gate CO2 Removal Process
Wills, J., Shemaria, M., & Mitariten, M. J. (2004) · SPE Production & Facilities · doi:10.2118/87644-pa · Cited by 7 · cited 2×
“Many studies have confirmed that CH4 can be excluded from the structure while gases like H2S, CO2, and specially N2 can be adsorbed [43, 176, 177].”
BackgroundSeparation of n/ISO-Paraffins by adsorption processes
Silva, J. A. C. (1998) · Open Repository of the University of Porto (University of Porto) · doi:10.34626/9ja6-s197 · Cited by 7
Adsorption Dynamics In A Monolithic Adsorbent
Shah, D. B., Perera, S. P., & Crittenden, B. D. (1996) · Kluwer international series in engineering and computer science · doi:10.1007/978-1-4613-1375-5_101 · Cited by 6 · cited 2×
“Alternatively, it can be shaped into honeycomb monolithic structures resulting in reduced pressure drop of the system [44–54].”
BackgroundSemianalytical solution for multicomponent pressure swing adsorption
Serbezov, A., & Sotirchos, S. V. (1998) · Chemical Engineering Science · doi:10.1016/s0009-2509(98)00181-x · Cited by 4 · cited 2×
“[24] A.”
BackgroundEbner, A. D., Ritter, J. A., LeVan, M. D., & Knox, J. C. (2009) · SAE International Journal of Aerospace · doi:10.4271/2009-01-2532 · Cited by 4 · cited 2×
“[123] A.”
Background
Research works printed but not linked: 13
- 2001, Oil and Gas Journal, 99, 42
- 2008, Current Science, 95, 1684
- 1988, AIChE Symposium Series, 84, 70
- 2004, Hydrocarbon Engineering, 9, 53
- 1962, Chemical & Engineering News, 40, 59
- 2011, SAE International Journal of Aerospace, 4, 488
- 1993, Studies in Surface Science and Catalysis, 80, 788
- 2000, European Journal of Inorganic Chemistry, 801
- 1975, AIChE Symposium Series, 71, 69
- 1995, The Chemical Engineering Journal, 57, 137
- 1996, Adsorption, 3, 7
- 2008, European Patent Application, 1, 917
- 2012, Energy Procedia, 26, 2, 10.1016/j.egypro.2012.06.004 · DOI
Cited by
Zeolites in Adsorption Processes: State of the Art and Future Prospects
Pérez-Botella, E., Valencia, S., & Rey, F. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00140 · Cited by 1,126
The future of hydrogen: Challenges on production, storage and applications
Rasul, M. G., Hazrat, M. A., Sattar, M. A., Jahirul, M. I., & Shearer, M. J. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116326 · Cited by 856
Zeolites as Selective Adsorbents for CO2 Separation
Boer, D. G., Langerak, J., & Pescarmona, P. P. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c03605 · Cited by 481
Evaluation of biogas upgrading technologies and future perspectives: A review
Kapoor, R., Ghosh, P., Kumar, M., & Vijay, V. K. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-04767-1 · Cited by 423
“…adsorption of at least one selective gaseous component (adsorbate) to the surface of the adsorbent according to molecular size due to physical or van der Waals forces or electrostatic forces while excluding other gaseous components under elevated pressure (Grande 2012; Galante et al. 2012).”
BackgroundDecarbonization of the Iron and Steel Industry with Direct Reduction of Iron Ore with Green Hydrogen
Bhaskar, A., Assadi, M., & Nikpey Somehsaraei, H. (2020) · Energies · doi:10.3390/en13030758 · Cited by 414
“Unreacted hydrogen is separated from the waste gas stream using a pressure swing adsorber [68,69].”
Metadata
- Authors
- Grande, C. A.
- Affiliations
- SINTEF (NO)
- Corresponding author
- Grande, Carlos A.
- ORCID
- Grande, Carlos A.
- Venue
- ISRN Chemical Engineering
- Publisher
- Wiley
- Published
- 2012-12-03
- Volume
- 2012
- Pages
- 1-13
- ISSN
- 2090-861X (ISSN-L)
- OpenAlex
- W2101241053
- Semantic Scholar
- af8f30638e0caa5e44ee91178c3af34001091771
- Cited by
- 285
- References
- 216
- Citations by year
- 2026: 25 · 2025: 34 · 2024: 27 · 2023: 24 · 2022: 42 · 2021: 26 · 2020: 22 · 2019: 21 · 2018: 14 · 2017: 12 · 2016: 11 · 2015: 12 · 2014: 13 · 2013: 2
- FWCI
- 13.21
- Type
- journal article
- Language
- en
- Open access
- diamond
- doi.org
- Locations
- ISRN Chemical Engineering (publishedVersion, cc-by)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane Separation and Gas Transport
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Keywords
- pressure swing adsorption, gas separation, adsorbents, air separation, gas drying, hydrogen purification, methane purification, biogas upgrading, natural gas processing, process engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.