The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Friction stir welding and processing
Abstract
Abstract Friction stir welding (FSW) is a relatively new solid-state joining process. This joining technique is energy efficient, environment friendly, and versatile. In particular, it can be used to join high-strength aerospace aluminum alloys and other metallic alloys that are hard to weld by conventional fusion welding. FSW is considered to be the most significant development in metal joining in a decade. Recently, friction stir processing (FSP) was developed for microstructural modification of metallic materials. In this review article, the current state of understanding and development of the FSW and FSP are addressed. Particular emphasis has been given to: (a) mechanisms responsible for the formation of welds and microstructural refinement, and (b) effects of FSW/FSP parameters on resultant microstructure and final mechanical properties. While the bulk of the information is related to aluminum alloys, important results are now available for other metals and alloys. At this stage, the technology diffusion has significantly outpaced the fundamental understanding of microstructural evolution and microstructure–property relationships.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recrystallization and Related Annealing Phenomena
(2004) · Elsevier eBooks · doi:10.1016/b978-0-08-044164-1.x5000-2 · Cited by 7,407
Current issues in recrystallization: a review
Doherty, R. D., Hughes, D. A., Humphreys, F. J., Jonas, J. J., Jensen, D. J., Kassner, M. E., King, W. E., McNelley, T. R., McQueen, H. J., & Rollett, A. D. (1997) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00424-3 · Cited by 2,397
Friction stir processing: a novel technique for fabrication of surface composite
Mishra, R. S., Ma, Z. Y., & Charit, I. (2002) · Materials Science and Engineering A · doi:10.1016/s0921-5093(02)00199-5 · Cited by 1,170
Microstructural investigation of friction stir welded 7050-T651 aluminium
Su, J. Q., Nelson, T. W., Mishra, R. S., & Mahoney, M. W. (2003) · Acta Materialia · doi:10.1016/s1359-6454(02)00449-4 · Cited by 1,096
Properties of friction-stir-welded 7075 T651 aluminum
Mahoney, M. W., Rhodes, C. G., Flintoff, J. G., Bingel, W. H., & Spurling, R. A. (1998) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-998-0021-5 · Cited by 948
Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys
Jata, K. V., & Semiatin, S. L. (2000) · Scripta Materialia · doi:10.1016/s1359-6462(00)00480-2 · Cited by 841
CTH: A three-dimensional shock wave physics code
McGlaun, J. M., Thompson, S. L., & Elrick, M. G. (1990) · International Journal of Impact Engineering · doi:10.1016/0734-743x(90)90071-3 · Cited by 816
An analytical model for the heat generation in friction stir welding
Schmidt, H., Hattel, J., & Wert, J. (2004) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/12/1/013 · Cited by 809
Microstructural evolution of 6063 aluminum during friction-stir welding
Sato, Y. S., Kokawa, H., Enomoto, M., & Jogan, S. (1999) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-999-0251-1 · Cited by 706
A process model for friction stir welding of age hardening aluminum alloys
Frigaard, Ø., Grong, Ø., & Midling, O. T. (2001) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-001-0128-4 · Cited by 688
Cary, H. B. (1979) · Medical Entomology and Zoology · Cited by 474
Sato, Y. S., Urata, M., & Kokawa, H. (2002) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-002-0124-3 · Cited by 473
Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys
Sato, Y. S., Park, S. H. C., Michiuchi, M., & Kokawa, H. (2004) · Scripta Materialia · doi:10.1016/j.scriptamat.2004.02.002 · Cited by 437
Visualization of the material flow in AA2195 friction-stir welds using a marker insert technique
Seidel, T. U., & Reynolds, A. P. (2001) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-001-1038-1 · Cited by 390
Developments in Theoretical and Applied Mechanics
(1967) · Elsevier eBooks · doi:10.1016/c2013-0-01518-6 · Cited by 389
Heat Input and Temperature Distribution in Friction Stir Welding
Tang, W. X., Guo, X., Mcclure, J. C., Murr, L. E., & Nunes, A. C. (1998) · Journal of Materials Processing & Manufacturing Science · doi:10.1106/55tf-pf2g-jbh2-1q2b · Cited by 388
Dawes, C., & Thomas, W. M. (1996) · Welding Journal · Cited by 353
Friction Stir Welding – Recent Developments in Tool and Process Technologies
Thomas, W. M., Johnson, K. I., & Wiesner, C. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200300355 · Cited by 322
Distribution of tensile property and microstructure in friction stir weld of 6063 aluminum
Sato, Y. S., & Kokawa, H. (2001) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-001-0177-8 · Cited by 313
Microtexture in the friction-stir weld of an aluminum alloy
Sato, Y. S., Kokawa, H., Ikeda, K., Enomoto, M., HASHIMOTO, T., & Jogan, S. (2001) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-001-0351-z · Cited by 301
Visualisation of material flow in autogenous friction stir welds
Reynolds, A. P. (2000) · Science and Technology of Welding & Joining · doi:10.1179/136217100101538119 · Cited by 300
Superplasticity in powder metallurgy aluminum alloys and composites
Mishra, R. S., Bieler, T. R., & Mukherjee, A. K. (1995) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(94)00323-a · Cited by 261
High strain rate superplasticity in a commercial 2024 Al alloy via friction stir processing
Charit, I., & Mishra, R. S. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(03)00367-8 · Cited by 252
Ouyang, J., & Kovacevic, R. (2002) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-002-0008-0 · Cited by 233
Characterization of a friction-stir-welded aluminum alloy 6013
Heinz, B., & Skrotzki, B. (2002) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-002-0059-5 · Cited by 233
Precipitation sequence in friction stir weld of 6063 aluminum during aging
Sato, Y. S., Kokawa, H., Enomoto, M., Jogan, S., & HASHIMOTO, T. (1999) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-999-0223-5 · Cited by 207
Murr, L. E., Li, Y., Flores, R. D., Trillo, E. A., & McClure, J. C. (1998) · Materials Research Innovations · doi:10.1007/s100190050078 · Cited by 191
SOMASEKHARAN, A. (2004) · Materials Characterization · doi:10.1016/s1044-5803(04)00054-3 · Cited by 189
Finite element simulation of material flow in friction stir welding
Xu, S., Deng, X., Reynolds, A. P., & Seidel, T. U. (2001) · Science and Technology of Welding & Joining · doi:10.1179/136217101101538640 · Cited by 184
Lee, W., Yeon, Y.-M., & Jung, S. (2003) · Scripta Materialia · doi:10.1016/s1359-6462(03)00301-4 · Cited by 182
Overview No. 124 Modelling of precipitation reactions in industrial processing
Bratland, D., Grong, Ø., Shercliff, H. R., Myhr, O. R., & Tjøtta, S. (1997) · Acta Materialia · doi:10.1016/s1359-6454(96)00100-0 · Cited by 174
Casting and heat treatment variables of Al–7Si–Mg alloy
Kashyap, K. T., Murali, S., Raman, K. S., & Murthy, K. S. S. (1993) · Materials Science and Technology · doi:10.1179/026708393790171944 · Cited by 162
Microstructural evolution by continuous recrystallization in a superplastic Al-Mg alloy
Hales, S. J., & McNelley, T. R. (1988) · Acta Metallurgica · doi:10.1016/0001-6160(88)90275-1 · Cited by 123
Tsuzaki, K., Huang, X., & Maki, T. (1996) · Acta Materialia · doi:10.1016/1359-6454(96)00080-8 · Cited by 105
Microstructure and retention of superplasticity of friction stir welded superplastic 2095 sheet
Salem, H. G., Reynolds, A. P., & LYONS, J. S. (2002) · Scripta Materialia · doi:10.1016/s1359-6462(01)01246-5 · Cited by 98
Friction-stir welding: microstructural characterization
Murr, L. E., Flores, R. D., Flores, O. V., Mcclure, J. C., Liu, G., & Brown, D. (1998) · Materials Research Innovations · doi:10.1007/s100190050043 · Cited by 95
On deformation-induced continuous recrystallization in a superplastic AlLiCuMgZr alloy
Liu, Q., Xiaoxu, H., Mei, Y., & Jinfeng, Y. (1992) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(92)90118-x · Cited by 91
Friction-stir welding of aluminum alloy 2024 to silver
Li, Y., Trillo, E. A., & Murr, L. E. (2000) · Journal of Materials Science Letters · doi:10.1023/a:1006795221194 · Cited by 71
Fundamental Issues and Industrial Applications of Friction-Stir Welding
Murr, L. E., Li, Y., Trillo, E. A., & McClure, J. C. (2016) · scholarworks - UTEP (The University of Texas at El Paso) · doi:10.1080/10667857.2000.11752854 · Cited by 47
Recrystallization during Hot Deformation of Aluminium
GOURDET, S., Konopleva, E. V., McQueen, H. J., & Montheillet, F. (1996) · Materials science forum · doi:10.4028/www.scientific.net/msf.217-222.441 · Cited by 24
Cited by
Recent advances in friction-stir welding – Process, weldment structure and properties
NANDAN, R., DEBROY, T., & BHADESHIA, H. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.05.001 · Cited by 2,098
Heidarzadeh, A., Mironov, S., Kaibyshev, R., Çam, G., Simar, A., Gerlich, A., Khodabakhshi, F., Mostafaei, A., Field, D. P., Robson, J. D., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100752 · Cited by 1,048
Review: Friction stir welding tools
Rai, R., De, A., Bhadeshia, H. K. D. H., & DebRoy, T. (2011) · Science and Technology of Welding and Joining · doi:10.1179/1362171811y.0000000023 · Cited by 808
Recrystallization mechanisms during friction stir welding/processing of aluminum alloys
McNelley, T. R., Swaminathan, S., & Su, J. Q. (2008) · Scripta Materialia · doi:10.1016/j.scriptamat.2007.09.064 · Cited by 621
Critical review of automotive steels spot welding: process, structure and properties
Pouranvari, M., & Marashi, S. P. H. (2013) · Science and Technology of Welding and Joining · doi:10.1179/1362171813y.0000000120 · Cited by 533
Metadata
- Venue
- Choice Reviews Online
- Publisher
- American Library Association
- Published
- 2008-10-01
- Volume
- 46
- Issue
- 02
- Pages
- 46-0901-46-0901
- ISSN
- 0009-4978 (ISSN-L)
- 1523-8253
- OpenAlex
- W2149748237
- Cited by
- 3,862
- References
- 40
- Type
- book review
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.