Two-photon polymerization of biocompatible photopolymers for microstructured 3D biointerfaces
The DOI matches its Crossref record; 92 of the 92 references it cites were found in a registry or an index.
Abstract
Three‐dimensional microstructured scaffolds provide a means for cells to be cultured in vitro in a way that resembles natural conditions more closely than flat tissue culture polystyrene. In the presented work, two‐photon polymerization (2PP) is applied as a tool for the engineering of high‐resolution 3D scaffold structures with a well defined microarchitecture made of biocompatible photo resins. 2PP is a novel photolithographic technique using femtosecond laser pulses which enables free 3D microstructuring of liquid photo resins due to the relationship of the axial and lateral spatial confinement of the photoreaction to the focal volume of a focused laser beam. A set of photo resins were tested with regard to 2PP processability and three different classes of methacrylated photopolymerizable monomers (methacrylated oligolactones, urethane dimethacrylate, poly(ethylene glycol diacrylate)) were found to be efficient 2PP materials. 3D microstructures based on computer models were produced and tested for biocompatibility. The initial cell adhesion and the viability of bovine chondrocytes on the polymeric scaffolds were evaluated morphologically by confocal laser scanning microscopy (CLSM) after three‐day culture on 2PP derived microstructures. 2PP derived scaffolds were fabricated in different sizes and geometries, starting from the 100 µm‐range reaching out to the cm‐range showing the actual possibilities to produce large volume scaffolds even for implantation purposes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Two-photon laser scanning fluorescence microscopy
Denk, W., Strickler, J. H., & Webb, W. W. (1990) · Science · doi:10.1126/science.2321027 · Cited by 9,488
Treatment of Deep Cartilage Defects in the Knee with Autologous Chondrocyte Transplantation
Brittberg, M., Lindahl, A., Nilsson, A., Ohlsson, C., Isaksson, O., & Peterson, L. (1994) · New England Journal of Medicine · doi:10.1056/nejm199410063311401 · Cited by 5,516
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Hydrogels as extracellular matrix mimics for 3D cell culture
Tibbitt, M. W., & Anseth, K. S. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22361 · Cited by 2,727
Über Elementarakte mit zwei Quantensprüngen
Göppert‐Mayer, M. (1931) · Annalen der Physik · doi:10.1002/andp.19314010303 · Cited by 2,691
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Microscale technologies for tissue engineering and biology
Khademhosseini, A., Langer, R., Borenstein, J., & Vacanti, J. P. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0507681102 · Cited by 1,558
Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
Petersen, O. W., Rønnov-Jessen, L., Howlett, A. R., & Bissell, M. J. (1992) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.89.19.9064 · Cited by 1,094
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Review: tissue engineering for regeneration of articular cartilage
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00213-6 · Cited by 1,052
Three-Dimensional Cell Culture Matrices: State of the Art
Lee, J., Cuddihy, M. J., & Kotov, N. A. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/teb.2007.0150 · Cited by 1,047
The extracellular matrix as a biologic scaffold material
Badylak, S. F. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.04.043 · Cited by 1,022
An Efficient Two-Photon-Generated Photoacid Applied to Positive-Tone 3D Microfabrication
Zhou, W., Kuebler, S. M., Braun, K. L., Yu, T., Cammack, J. K., Ober, C. K., Perry, J. W., & Marder, S. R. (2002) · Science · doi:10.1126/science.296.5570.1106 · Cited by 761
The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2002) · Tissue Engineering · doi:10.1089/107632702753503009 · Cited by 729
Encyclopedia of molecular cell biology and molecular medicine
Meyers, R. A. (2004) · Cited by 613
Serbin, J., Egbert, A., Ostendorf, A., Chichkov, B. N., Houbertz, R., Domann, G., Schulz, J., Cronauer, C., Fröhlich, L., & Popall, M. (2003) · Optics Letters · doi:10.1364/ol.28.000301 · Cited by 592
LaFratta, C. N., Fourkas, J. T., Baldacchini, T., & Farrer, R. A. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200603995 · Cited by 589
Reversible Switching of Hydrogel-Actuated Nanostructures into Complex Micropatterns
Sidorenko, A., Krupenkin, T., Taylor, A., Fratzl, P., & Aizenberg, J. (2007) · Science · doi:10.1126/science.1135516 · Cited by 562
Probing the role of multicellular organization in three-dimensional microenvironments
Albrecht, D. R., Underhill, G. H., Wassermann, T. B., Sah, R. L., & Bhatia, S. N. (2006) · Nature Methods · doi:10.1038/nmeth873 · Cited by 552
Photoencapsulation of chondrocytes in poly(ethylene oxide)-based semi-interpenetrating networks
Elisseeff, J. H., McIntosh, W., Anseth, K. S., Riley, S. L., Ragan, P. M., & Langer, R. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(200008)51:2<216::aid-jbm10>3.0.co;2-k · Cited by 510
Photoencapsulation of chondrocytes in poly(ethylene oxide)-based semi-interpenetrating networks
Elisseeff, J., McIntosh, W., Anseth, K., Riley, S., Ragan, P., & Langer, R. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(200008)51:2<164::aid-jbm4>3.0.co;2-w · Cited by 510
Uber Elementarrakte mit zwei Quantensprungen
Goppert-Mayer, V. M. (1931) · Annals of Physics · Cited by 500
Photolithographic patterning of polyethylene glycol hydrogels
Hahn, M. S., Taite, L. J., Moon, J. J., Rowland, M. C., Ruffino, K. A., & West, J. L. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.11.045 · Cited by 411
RAJAGOPALAN, S., & ROBB, R. (2006) · Medical Image Analysis · doi:10.1016/j.media.2006.06.001 · Cited by 392
Recent progress in multiphoton microfabrication
Maruo, S., & Fourkas, J. T. (2008) · Laser & Photonics Reviews · doi:10.1002/lpor.200710039 · Cited by 390
Two-Photon Photopolymerization and 3D Lithographic Microfabrication
Sun, H.-B., & Kawata, S. (2006) · Advances in Polymer Science · doi:10.1007/b94405 · Cited by 380
Nelson, C. M., & Bissell, M. J. (2005) · Seminars in Cancer Biology · doi:10.1016/j.semcancer.2005.05.001 · Cited by 332
Pure and doped boron nitride nanotubes
Terrones, M., Romo-Herrera, J. M., Cruz-Silva, E., López-Urías, F., Muñoz-Sandoval, E., Velázquez-Salazar, J. J., Terrones, H., Bando, Y., & Golberg, D. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70077-9 · Cited by 313
Microfabrication and microfluidics for tissue engineering: state of the art and future opportunities
Andersson, H., & Berg, A. V. D. (2004) · Lab on a Chip · doi:10.1039/b314469k · Cited by 307
Self-citationSerbin, J., Ovsianikov, A., & Chichkov, B. (2004) · Optics Express · doi:10.1364/opex.12.005221 · Cited by 305
Can cancer be reversed by engineering the tumor microenvironment?
Ingber, D. E. (2008) · Seminars in Cancer Biology · doi:10.1016/j.semcancer.2008.03.016 · Cited by 298
3D Cell‐Migration Studies using Two‐Photon Engineered Polymer Scaffolds
Tayalia, P., Mendonca, C. R., Baldacchini, T., Mooney, D. J., & Mazur, E. (2008) · Advanced Materials · doi:10.1002/adma.200801319 · Cited by 253
Two-photon absorption cross-sections of common photoinitiators
Schafer, K. J., Hales, J. M., Balu, M., Belfield, K. D., Van Stryland, E. W., & Hagan, D. J. (2004) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/s1010-6030(03)00394-0 · Cited by 247
Recent developments in the use of two‐photon polymerization in precise 2D and 3D microfabrications
Lee, K., Yang, D., Park, S. H., & Kim, R. H. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.664 · Cited by 242
Two-photon polymerisation for three-dimensional micro-fabrication
Wu, S., Serbin, J., & Gu, M. (2006) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2006.03.004 · Cited by 222
Biomaterials and scaffold design: key to tissue‐engineering cartilage
Raghunath, J., Rollo, J., Sales, K. M., Butler, P. E., & Seifalian, A. M. (2007) · Biotechnology and Applied Biochemistry · doi:10.1042/ba20060134 · Cited by 222
Microtechnologies and nanotechnologies for single-cell analysis
Andersson, H., & van den Berg, A. (2004) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2004.01.004 · Cited by 217
Self-citationIntegrating novel technologies to fabricate smart scaffolds
Moroni, L., de Wijn, J. R., & van Blitterswijk, C. A. (2008) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856208784089571 · Cited by 216
Acrylic-based resin with favorable properties for three-dimensional two-photon polymerization
Baldacchini, T., LaFratta, C. N., Farrer, R. A., Teich, M. C., Saleh, B. E. A., Naughton, M. J., & Fourkas, J. T. (2004) · Journal of Applied Physics · doi:10.1063/1.1728296 · Cited by 207
Ovsianikov, A., Schlie, S., Ngezahayo, A., Haverich, A., & Chichkov, B. N. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.57 · Cited by 194
Three-Dimensional Biodegradable Structures Fabricated by Two-Photon Polymerization
Claeyssens, F., Hasan, E. A., Gaidukeviciute, A., Achilleos, D. S., Ranella, A., Reinhardt, C., Ovsianikov, A., Shizhou, X., Fotakis, C., Vamvakaki, M., et al. (2009) · Langmuir · doi:10.1021/la803803m · Cited by 187
Microfabrication of Three-Dimensional Engineered Scaffolds
Borenstein, J. T., Weinberg, E. J., Orrick, B. K., Sundback, C., Kaazempur-Mofrad, M. R., & Vacanti, J. P. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0156 · Cited by 187
Fabricating three‐dimensional polymeric photonic structures by multi‐beam interference lithography
Moon, J. H., Ford, J., & Yang, S. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.663 · Cited by 179
Li, L., & Fourkas, J. T. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70130-x · Cited by 179
Teh, W. H., Dürig, U. T., Drechsler, U., Smith, C. G., & Güntherodt, H. ‐. (2005) · Journal of Applied Physics · doi:10.1063/1.1856214 · Cited by 177
Synthesis, properties and applications of inorganic–organic copolymers (ORMOCER®s)
Haas, K.-H., & Wolter, H. (1999) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(00)00009-7 · Cited by 175
Minimal surfaces and multifunctionality
Torquato, S., & Donev, A. (2004) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2003.1269 · Cited by 164
Formanek, F., Takeyasu, N., Tanaka, T., Chiyoda, K., Ishikawa, A., & Kawata, S. (2006) · Optics Express · doi:10.1364/opex.14.000800 · Cited by 154
Tanaka, H., Murphy, C. L., Murphy, C., Kimura, M., Kawai, S., & Polak, J. M. (2004) · Journal of Cellular Biochemistry · doi:10.1002/jcb.20171 · Cited by 152
Three-dimensional microfabrication by two-photon-initiated polymerization with a low-cost microlaser
Wang, I., Bouriau, M., Baldeck, P. L., Martineau, C., & Andraud, C. (2002) · Optics Letters · doi:10.1364/ol.27.001348 · Cited by 136
Kuebler, S. M., Braun, K. L., Zhou, W., Cammack, J. K., Yu, T., Ober, C. K., Marder, S. R., & Perry, J. W. (2003) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/s1010-6030(03)00030-3 · Cited by 131
Weiß, T., Hildebrand, G., Schade, R., & Liefeith, K. (2009) · Engineering in Life Sciences · doi:10.1002/elsc.200900002 · Cited by 121
Self-citationAnscombe, N. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.250 · Cited by 120
Organics and Polymers with High Two-Photon Activities and their Applications
Lin, T., Chung, S.-J., Kim, K.-S., Wang, X., He, G. S., Swiatkiewicz, J. J., Pudavar, H. E., & Prasad, P. N. (2007) · Springer eBooks · doi:10.1007/3-540-45642-2_3 · Cited by 115
Fabrication of Three-Dimensional Tissues
Tsang, V. L., & Bhatia, S. N. (2006) · Springer eBooks · doi:10.1007/10_010 · Cited by 107
Schlie, S., Ngezahayo, A., Ovsianikov, A., Fabian, T., Kolb, H.-A., Haferkamp, H., & Chichkov, B. N. (2007) · Journal of Biomaterials Applications · doi:10.1177/0885328207077590 · Cited by 106
Two-Photon Three-Dimensional Microfabrication of Poly(Dimethylsiloxane) Elastomers
Coenjarts, C. A., & Ober, C. K. (2004) · Chemistry of Materials · doi:10.1021/cm048717z · Cited by 103
3-Dimensional Submicron Polymerization of Acrylamide by Multiphoton Excitation of Xanthene Dyes
Campagnola, P. J., Delguidice, D. M., Epling, G. A., Hoffacker, K. D., Howell, A. R., Pitts, J. D., & Goodman, S. L. (2000) · Macromolecules · doi:10.1021/ma991042e · Cited by 101
Straub, M., Nguyen, L. H., Fazlić, A., & Gu, M. (2004) · Optical Materials · doi:10.1016/j.optmat.2004.07.013 · Cited by 85
Black silicon—new functionalities in microsystems
Stubenrauch, M., Fischer, M., Kremin, C. D.-I., Stoebenau, S., Albrecht, A., & Nagel, O. (2006) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/16/6/s13 · Cited by 85
Chemically Amplified Positive Resists for Two‐Photon Three‐Dimensional Microfabrication
Yu, T. H., Ober, C. K., Kuebler, S. M., Zhou, W., Marder, S. R., & Perry, J. W. (2003) · Advanced Materials · doi:10.1002/adma.200390120 · Cited by 81
Nanoscale Photolithography with Visible Light
Fourkas, J. T. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1002082 · Cited by 78
Basu, S., & Campagnola, P. J. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30175 · Cited by 76
Pitts, J. D., Howell, A. R., Taboada, R., Banerjee, I. A., Wang, J., Goodman, S. L., & Campagnola, P. J. (2002) · Photochemistry and Photobiology · doi:10.1562/0031-8655(2002)0760135npfmet2.0.co2 · Cited by 76
Two-photon micropatterning of amines within an agarose hydrogel
Wylie, R. G., & Shoichet, M. S. (2008) · Journal of Materials Chemistry · doi:10.1039/b718431j · Cited by 75
Laser interaction in sol–gel based materials—3-D lithography for photonic applications
Houbertz, R. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2005.01.164 · Cited by 65
Fabrication of three-dimensional structures by three-photon polymerization
Farsari, M., Filippidis, G., & Fotakis, C. (2005) · Optics Letters · doi:10.1364/ol.30.003180 · Cited by 64
Cunningham, L. P., Veilleux, M. P., & Campagnola, P. J. (2006) · Optics Express · doi:10.1364/oe.14.008613 · Cited by 64
Two-Photon Polymerization for Fabricating Structures Containing the Biopolymer Chitosan
Correa, D. S., Tayalia, P., Cosendey, G., dos Santos, D. S., Aroca, R. F., Mazur, E., & Mendonca, C. R. (2009) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2009.1292 · Cited by 63
Xing, J.-F., Chen, W., Gu, J., Dong, X.-Z., Takeyasu, N., Tanaka, T., Duan, X.-M., & Kawata, S. (2007) · Journal of Materials Chemistry · doi:10.1039/b616792f · Cited by 59
Holographic recording using two-photon-induced photopolymerization
Kirkpatrick, S. M., Baur, J. W., Clark, C., Denny, L. R., Tomlin, D. W., Reinhardt, B. R., Kannan, R., & Stone, M. O. (1999) · Applied Physics A · doi:10.1007/s003390051033 · Cited by 55
Catalytic Three-Dimensional Protein Architectures
Allen, R., Nielson, R., Wise, D. D., & Shear, J. B. (2005) · Analytical Chemistry · doi:10.1021/ac0507892 · Cited by 52
Schneider, S. O., Schmitt, G., Mau, H., Schmitt, H., Sabo, D., & Richter, W. (2005) · Der Orthopäde · doi:10.1007/s00132-005-0812-y · Cited by 51
Lu, Y., Hasegawa, F., Goto, T., Ohkuma, S., Fukuhara, S., Kawazu, Y., Totani, K., Yamashita, T., & Watanabe, T. (2003) · Journal of Materials Chemistry · doi:10.1039/b309023j · Cited by 49
Two-Photon Photopolymerized Tips for Adhesion-Free Scanning-Probe Microscopy
Kim, J. M., & Muramatsu, H. (2005) · Nano Letters · doi:10.1021/nl0480363 · Cited by 46
Microfabricated three-dimensional environments for single cell studies
Dusseiller, M. R., Smith, M. L., Vogel, V., & Textor, M. (2006) · Biointerphases · doi:10.1116/1.2190698 · Cited by 46
Pins, G. D., Bush, K., Cunningham, L. P., & Campagnola, P. J. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30680 · Cited by 41
Basu, S., Rodionov, V., Terasaki, M. R., & Campagnola, P. J. (2005) · Optics Letters · doi:10.1364/ol.30.000159 · Cited by 39
Computer Aided Tissue Engineering for Modeling and Design of Novel Tissue Scaffolds
Nam, J., Starly, B., Darling, A., & Sun, W. (2004) · Computer-Aided Design and Applications · doi:10.1080/16864360.2004.10738308 · Cited by 29
Fast solvent-driven micropump fabricated by two-photon microfabrication
Xiong, Z., Dong, X., Chen, W., & Duan, X. (2008) · Applied Physics A · doi:10.1007/s00339-008-4735-4 · Cited by 28
Synthesis of Poly(ester‐anhydrides) Based on Different Polyester Precursors
Korhonen, H., Helminen, A. O., & Seppälä, J. V. (2004) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200300208 · Cited by 26
Biocompatibility of CAD/CAM ORMOCER polymer scaffold structures
Doraiswamy, A., Patz, T. M., Narayan, R. J., Chichkov, B. N., Ovsianikov, A., Houbertz, R., Modi, R., Auyeung, R. C. Y., & Chrisey, D. B. (2004) · MRS Proceedings · doi:10.1557/proc-845-aa2.4 · Cited by 23
Medicine Meets Virtual Reality 14: Accelerating Change in Healthcare: Next Medical Toolkit
Westwood, J. D., Haluck, R. S., Hoffman, H., Mogel, G. T., Phillips, R. J., Robb, R. A., & Kirby, G. (2006) · Medical Entomology and Zoology · Cited by 21
Lu, Y., Hasegawa, F., Ohkuma, S., Goto, T., Fukuhara, S., Kawazu, Y., Totani, K., Yamashita, T., & Watanabe, T. (2004) · Journal of Materials Chemistry · doi:10.1039/b316360a · Cited by 18
Two-Photon Photopolymerization of Functional Micro-Devices.
Kawata, S., & Sun, H. (2002) · Journal of Photopolymer Science and Technology · doi:10.2494/photopolymer.15.471 · Cited by 12
Knoll, A. W., Dürig, U. T., Züǵer, O., & Güntherodt, H. ‐. (2006) · Microelectronic Engineering · doi:10.1016/j.mee.2006.01.219 · Cited by 12
Yuan, D., Lasagni, A. F., Shao, P., & Das, S. (2008) · Virtual and Physical Prototyping · doi:10.1080/17452750802615713 · Cited by 11
A modular BioMEMS platform for new procedures and experiments in tissue engineering
Stubenrauch, M., Fröber, U. D.-I., Voges, D., Schilling, C., Hoffmann, M., & Witte, H. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/7/074013 · Cited by 10
Microsystems for the Characterization of 3D-ECM Analogous Bio-Interfaces
Fröber, U. D.-I., Stubenrauch, M., Weiß, T., Berg, A., Voges, D., Schade, R., Hildebrand, G., Schnabelrauch, M., Liefeith, K., Hoffmann, M., et al. (2009) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-642-03900-3_28 · Cited by 3
Self-citation
Research works printed but not linked: 8
- Martini J., 2006, Proc. SPIE‐Int. Soc. Opt. Eng., 6089, 274
- Ovsianikov A., 2008, Laser Chem., 7
- 10.1002/1616-3028(20020916)12:9<611::aid-adfm611>3.0.co;2-3 · doi:10.1002/1616-3028(20020916)12:9<611::aid-adfm611>3.0.co;2-3
- Schade R., 2009, Int. J. Artif. Organs, 32, 394
- Obata K., 2010, Proc. SPIE‐Int. Soc. Opt. Eng., 7584, 75840L
- Winfield R. J., 2008, Proc. SPIE‐Int. Soc. Opt. Eng., 6880, 688002
- Malinauskas M., 2010, Proc. SPIE‐Int. Soc. Opt. Eng., 7715, 77151F
- Vogta S., 2005, Biomed. Mater. Eng., 15, 73
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Bone tissue engineering scaffolding: computer-aided scaffolding techniques
Thavornyutikarn, B., Chantarapanich, N., Sitthiseripratip, K., Thouas, G. A., & Chen, Q. (2014) · Progress in Biomaterials · doi:10.1007/s40204-014-0026-7 · Cited by 325
3D printing of functional microrobots
Li, J., & Pumera, M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01062f · Cited by 303
Two‐Photon Polymerization: Fundamentals, Materials, and Chemical Modification Strategies
O'Halloran, S., Pandit, A., Heise, A., & Kellett, A. (2023) · Advanced Science · doi:10.1002/advs.202204072 · Cited by 274
Microarchitected Stretching‐Dominated Mechanical Metamaterials with Minimal Surface Topologies
Al‐Ketan, O., Rezgui, R., Rowshan, R., Du, H., Fang, N. X., & Abu Al‐Rub, R. K. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800029 · Cited by 249
Metadata
- Authors
- Weiß, T., Schade, R., Laube, T., Berg, A., Hildebrand, G., Wyrwa, R., Schnabelrauch, M., & Liefeith, K.
- Affiliations
- Institute for Bioprocessing and Analytical Measurement Techniques (DE)
- Innovent (DE)
- Corresponding author
- Liefeith, Klaus
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2011-06
- Volume
- 13
- Issue
- 9
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2077710580
- Cited by
- 80
- References
- 92
- Citations by year
- 2026: 1 · 2025: 4 · 2024: 4 · 2023: 5 · 2022: 5 · 2021: 6 · 2020: 5 · 2019: 10 · 2018: 7 · 2017: 6 · 2016: 5 · 2015: 5 · 2014: 4 · 2013: 6 · 2012: 6
- FWCI
- 3.22
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Nonlinear Optical Materials Studies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Keywords
- two-photon polymerization, 3D scaffolds, urethane dimethacrylate, poly(ethylene glycol) diacrylate, biocompatibility, chondrocyte adhesion, cell viability, scaffold implantation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.