Two-photon polymerization of biocompatible photopolymers for microstructured 3D biointerfaces
The DOI matches its Crossref record; 92 of the 92 references it cites were found in a registry or an index.
Abstract
Three‐dimensional microstructured scaffolds provide a means for cells to be cultured in vitro in a way that resembles natural conditions more closely than flat tissue culture polystyrene. In the presented work, two‐photon polymerization (2PP) is applied as a tool for the engineering of high‐resolution 3D scaffold structures with a well defined microarchitecture made of biocompatible photo resins. 2PP is a novel photolithographic technique using femtosecond laser pulses which enables free 3D microstructuring of liquid photo resins due to the relationship of the axial and lateral spatial confinement of the photoreaction to the focal volume of a focused laser beam. A set of photo resins were tested with regard to 2PP processability and three different classes of methacrylated photopolymerizable monomers (methacrylated oligolactones, urethane dimethacrylate, poly(ethylene glycol diacrylate)) were found to be efficient 2PP materials. 3D microstructures based on computer models were produced and tested for biocompatibility. The initial cell adhesion and the viability of bovine chondrocytes on the polymeric scaffolds were evaluated morphologically by confocal laser scanning microscopy (CLSM) after three‐day culture on 2PP derived microstructures. 2PP derived scaffolds were fabricated in different sizes and geometries, starting from the 100 µm‐range reaching out to the cm‐range showing the actual possibilities to produce large volume scaffolds even for implantation purposes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Two-photon laser scanning fluorescence microscopy
Denk, W., Strickler, J. H., & Webb, W. W. (1990) · Science · doi:10.1126/science.2321027 · Cited by 9,488
Treatment of Deep Cartilage Defects in the Knee with Autologous Chondrocyte Transplantation
Brittberg, M., Lindahl, A., Nilsson, A., Ohlsson, C., Isaksson, O., & Peterson, L. (1994) · New England Journal of Medicine · doi:10.1056/nejm199410063311401 · Cited by 5,516
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Hydrogels as extracellular matrix mimics for 3D cell culture
Tibbitt, M. W., & Anseth, K. S. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22361 · Cited by 2,727
Über Elementarakte mit zwei Quantensprüngen
Göppert‐Mayer, M. (1931) · Annalen der Physik · doi:10.1002/andp.19314010303 · Cited by 2,691
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Microscale technologies for tissue engineering and biology
Khademhosseini, A., Langer, R., Borenstein, J., & Vacanti, J. P. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0507681102 · Cited by 1,558
Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
Research works printed but not linked: 8
- Martini J., 2006, Proc. SPIE‐Int. Soc. Opt. Eng., 6089, 274
- Ovsianikov A., 2008, Laser Chem., 7
- 10.1002/1616-3028(20020916)12:9<611::aid-adfm611>3.0.co;2-3 · doi:10.1002/1616-3028(20020916)12:9<611::aid-adfm611>3.0.co;2-3
- Schade R., 2009, Int. J. Artif. Organs, 32, 394
- Obata K., 2010, Proc. SPIE‐Int. Soc. Opt. Eng., 7584, 75840L
- Winfield R. J., 2008, Proc. SPIE‐Int. Soc. Opt. Eng., 6880, 688002
- Malinauskas M., 2010, Proc. SPIE‐Int. Soc. Opt. Eng., 7715, 77151F
- Vogta S., 2005, Biomed. Mater. Eng., 15, 73
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Bone tissue engineering scaffolding: computer-aided scaffolding techniques
Thavornyutikarn, B., Chantarapanich, N., Sitthiseripratip, K., Thouas, G. A., & Chen, Q. (2014) · Progress in Biomaterials · doi:10.1007/s40204-014-0026-7 · Cited by 325
3D printing of functional microrobots
Li, J., & Pumera, M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01062f · Cited by 303
Two‐Photon Polymerization: Fundamentals, Materials, and Chemical Modification Strategies
O'Halloran, S., Pandit, A., Heise, A., & Kellett, A. (2023) · Advanced Science · doi:10.1002/advs.202204072 · Cited by 274
Microarchitected Stretching‐Dominated Mechanical Metamaterials with Minimal Surface Topologies
Al‐Ketan, O., Rezgui, R., Rowshan, R., Du, H., Fang, N. X., & Abu Al‐Rub, R. K. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800029 · Cited by 249
Guiding Lights: Tissue Bioprinting Using Photoactivated Materials
Lee, M., Rizzo, R., Surman, F., & Zenobi-Wong, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00077 · Cited by 239
Hydrogels for Two‐Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix
Torgersen, J., Qin, X., Li, Z., Ovsianikov, A., Liska, R., & Stampfl, J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203880 · Cited by 238
Laser Photofabrication of Cell-Containing Hydrogel Constructs
Ovsianikov, A., Mühleder, S., Torgersen, J., Li, Z., Qin, X.-H., Van Vlierberghe, S., Dubruel, P., Holnthoner, W., Redl, H., Liska, R., et al. (2014) · Langmuir · doi:10.1021/la402346z · Cited by 182
Radical photoinitiation with LEDs and applications in the 3D printing of composites
Zhang, Y., Xu, Y., Simon-Masseron, A., & Lalevée, J. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01411g · Cited by 182
Raimondi, M. T., Eaton, S. M., Nava, M. M., Laganà, M., Cerullo, G., & Osellame, R. (2012) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.2012.9278 · Cited by 147
Amato, L., Gu, Y., Bellini, N., Eaton, S. M., Cerullo, G., & Osellame, R. (2012) · Lab on a Chip · doi:10.1039/c2lc21116e · Cited by 150
Advanced cell culture platforms: a growing quest for emulating natural tissues
Mirbagheri, M., Adibnia, V., Hughes, B. R., Waldman, S. D., Banquy, X., & Hwang, D. K. (2019) · Materials Horizons · doi:10.1039/c8mh00803e · Cited by 168
Additive Manufacturing of Biomaterials − The Evolution of Rapid Prototyping
Touri, M., Kabirian, F., Saadati, M., Ramakrishna, S., & Mozafari, M. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800511 · Cited by 165
Three‐Dimensional μ‐Printing: An Enabling Technology
Hohmann, J. K., Renner, M., Waller, E. H., & von Freymann, G. (2015) · Advanced Optical Materials · doi:10.1002/adom.201500328 · Cited by 165
Mačiulaitis, J., Deveikytė, M., Rekštytė, S., Bratchikov, M., Darinskas, A., Šimbelytė, A., Daunoras, G., Laurinavičienė, A., Laurinavičius, A., Gudas, R., et al. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015015 · Cited by 164
Richter, B., Hahn, V., Bertels, S., Claus, T. K., Wegener, M., Delaittre, G., Barner‐Kowollik, C., & Bastmeyer, M. (2017) · Advanced Materials · doi:10.1002/adma.201604342 · Cited by 162
Ovsianikov, A., Mironov, V., Stampfl, J., & Liska, R. (2012) · Expert Review of Medical Devices · doi:10.1586/erd.12.48 · Cited by 160
Micro‐Engineered 3D Scaffolds for Cell Culture Studies
Greiner, A. M., Richter, B., & Bastmeyer, M. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201200132 · Cited by 143
Song, J., Michas, C., Chen, C. S., White, A. E., & Grinstaff, M. W. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201901217 · Cited by 133
Nanoscale 3D printing of hydrogels for cellular tissue engineering
You, S., Li, J., Zhu, W. Z., Yu, C., Mei, D., & Chen, S. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00301g · Cited by 125
Two-photon polymerization for 3D biomedical scaffolds: Overview and updates
Jing, X., Fu, H., Yu, B., Sun, M., & Wang, L. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.994355 · Cited by 117
“As the most broadly used synthetic hydrogel material in the biomedical field, PEGDA is frequently applied in TPP 3D scaffolds processing (Ovsianikov et al., 2007a; Ovsianikov et al., 2011c; Klein et al., 2011; Weiß et al., 2011; Nguyen et al., 2013; Accardo et al., 2018a; Yu et al., 2019; Song et al., 2021).”
BackgroundMethodNguyen, A. K., Gittard, S. D., Koroleva, A., Schlie, S., Gaidukevičiūtė, A., Chichkov, B. N., & Narayan, R. J. (2013) · Regenerative Medicine · doi:10.2217/rme.13.60 · Cited by 111
Felfel, R. M., Poocza, L., Gimeno-Fabra, M., Milde, T., Hildebrand, G., Ahmed, I., Scotchford, C., Sottile, V., Grant, D. M., & Liefeith, K. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/1/015011 · Cited by 106
Self-citationGreiner, A. M., Jäckel, M., Scheiwe, A. C., Stamov, D. R., Autenrieth, T. J., Lahann, J., Franz, C. M., & Bastmeyer, M. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.095 · Cited by 94
Multiphoton Lithography as a Promising Tool for Biomedical Applications
Gréant, C., Durme, B. V., Hoorick, J. V., & Vlierberghe, S. V. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202212641 · Cited by 91
Direct Laser Writing of Low‐Density Interdigitated Foams for Plasma Drive Shaping
Oakdale, J. S., Smith, R. F., Forien, J., Smith, W., Ali, S. J., Aji, L. B. B., Willey, T. M., Ye, J., van Buuren, T., Worthington, M. A., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702425 · Cited by 71
Harberts, J. I., Fendler, C., Teuber, J., Siegmund, M., Trenkle, A. D. S., Rieck, N., Wolpert, M., Zierold, R., & Blick, R. H. (2020) · ACS Nano · doi:10.1021/acsnano.0c04640 · Cited by 71
Direct laser writing-enabled 3D printing strategies for microfluidic applications
Young, O. M., Xu, X., Sarker, S., & Sochol, R. D. (2024) · Lab on a Chip · doi:10.1039/d3lc00743j · Cited by 67
Arslan, A., Steiger, W., Roose, P., den Bergen, H. V., Gruber, P., Zerobin, E., Chalupa‐Gantner, F., Guillaume, O., Ovsianikov, A., Vlierberghe, S. V., et al. (2020) · Materials Today · doi:10.1016/j.mattod.2020.10.005 · Cited by 65
Multimaterial 3D Printing for Microrobotic Mechanisms
Soreni‐Harari, M., Pierre, R. S., McCue, C., Moreno, K., & Bergbreiter, S. (2019) · Soft Robotics · doi:10.1089/soro.2018.0147 · Cited by 64
Cell type-specific adaptation of cellular and nuclear volume in micro-engineered 3D environments
Greiner, A. M., Klein, F., Gudzenko, T., Richter, B., Striebel, T., Wundari, B. G., Autenrieth, T. J., Wegener, M., Franz, C. M., & Bastmeyer, M. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.016 · Cited by 60
Ultra-fast laser microprocessing of medical polymers for cell engineering applications
Ortiz, R., Moreno‐Flores, S., Quintana, I., Vivanco, M., Sarasua, J.-R., & Toca-Herrera, J. L. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.12.039 · Cited by 58
Nano- and microstructured materials for in vitro studies of the physiology of vascular cells
Greiner, A. M., Sales, A., Chen, H., Biela, S., Kaufmann, D., & Kemkemer, R. (2016) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.7.155 · Cited by 55
Käpylä, E., Sedlačík, T., Aydogan, D. B., Viitanen, J. O., Rypáček, F., & Kellomäki, M. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.07.027 · Cited by 53
“This is consistent with previously published findings of the higher 2PP-DLW reactivity of acrylated macromers compared to methacryloylated analogs [48].”
ResultBiocompatible polysaccharide-based cryogels
Reichelt, S., Becher, J., Weisser, J., Prager, A., Decker, U. P., Möller, S., Berg, A., & Schnabelrauch, M. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.10.034 · Cited by 52
Self-citationWang, X., Wei, Z., Baysah, C. Z., Zheng, M., & Xing, J. (2019) · RSC Advances · doi:10.1039/c9ra05645a · Cited by 51
Advanced Nanobiomaterial Strategies for The Development of Organized Tissue Engineering Constructs
An, J., Chua, C. K., Yu, T., Li, H., & Tan, L. P. (2013) · Nanomedicine · doi:10.2217/nnm.13.46 · Cited by 49
Raimondi, M. T., Eaton, S. M., Nava, M. M., Laganà, M., Cerullo, G., & Osellame, R. (2012) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabb.2012.9249 · Cited by 49
Two-photon lithography for integrated photonic packaging
Yu, S., Du, Q., Mendonça, C. R., Ranno, L., Gu, T., & Hu, J. (2023) · Light Advanced Manufacturing · doi:10.37188/lam.2023.032 · Cited by 40
Barata, D. B., Provaggi, E., van Blitterswijk, C., & Habibović, P. (2017) · Lab on a Chip · doi:10.1039/c7lc00802c · Cited by 37
Zhu, Y., Shen, J., Li, Y., Wei, X., Chen, F., Zhong, M., Gu, Z., Xie, Y., Jin, W. H., Liu, Z., et al. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.045 · Cited by 36
Biomaterials obtained by photopolymerization: from UV to two photon
Mendes‐Felipe, C., Ruiz‐Rubio, L., & Vilas‐Vilela, J. L. (2020) · Emergent Materials · doi:10.1007/s42247-020-00114-0 · Cited by 33
Stereolithographic Visible-Light Printing of Poly( l -glutamic acid) Hydrogel Scaffolds
Viray, C. M., van Magill, B., Zreiqat, H., & Ramaswamy, Y. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c01519 · Cited by 29
Poocza, L., Gottschaldt, M., Markweg, E., Hauptmann, N., Hildebrand, G., Pretzel, D., Hartlieb, M., Reichardt, C. L., Kübel, J., Schubert, U. S., et al. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201600686 · Cited by 27
Self-citationCustomization of direct laser lithography-based 3D scaffolds for optimized in vivo outcome
Mačiulaitis, J., Rekštytė, S., Bratchikov, M., Gudas, R., Malinauskas, M., Pockevičius, A., Ūsas, A., Rimkūnas, A., Jankauskaitė, V., Grigaliunas, V., et al. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.05.065 · Cited by 27
Hauptmann, N., Lian, Q., Ludolph, J., Rothe, H., Hildebrand, G., & Liefeith, K. (2019) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2018.0284 · Cited by 26
“Innovative methods were established for generating scaffolds with defined pore sizes and pore distributions, such as fused deposition modeling,(93) selective laser sintering,(94) stereolithography (SLA),(95) and 2-PP.(96) These so-called RP techniques are manufacturing techniques in which 3D structures are generated i…”
MethodSelf-citationRuediger, T., Berg, A., Guellmar, A., Rode, C., Schnabelrauch, M., Urbanek, A., Wagner, K., Wyrwa, R., Kinne, R. W., & Sigusch, B. W. (2012) · Dental Materials · doi:10.1016/j.dental.2012.05.008 · Cited by 25
“[40] Weiß T, Schade R, Laube T, Berg A, Hildebrand G, Wyrwa R, et al.”
BackgroundMethodSelf-citationEnzyme‐Degradable 3D Multi‐Material Microstructures
Gräfe, D., Gernhardt, M., Ren, J., Blasco, E., Wegener, M., Woodruff, M. A., & Barner‐Kowollik, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006998 · Cited by 24
Additive manufacturing of metastructures at the micro- and nano-scale
Hu, S., Park, C., Jeong, S., Jeon, N., Kim, J. S., & Rho, J. (2026) · Chemical Society Reviews · doi:10.1039/d4cs01054j · Cited by 23
Cell-instructive high-resolution micropatterned polylactic acid surfaces
Barata, D. B., Dias, P., Wieringa, P. A., van Blitterswijk, C., & Habibović, P. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7d24 · Cited by 23
Imani, K. B. C., Jo, A., Choi, G. M., Kim, B., Chung, J. W., Lee, H. S., & Yoon, J. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100579 · Cited by 23
Ultrafast 3D high precision print of micro structures for optical instrument calibration procedures
Ströer, F., Hering, J., Eifler, M., Raid, I., von Freymann, G., & Seewig, J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.09.001 · Cited by 22
Yu, H., Zhang, Q., Chen, X., Luan, H., & Gu, M. (2022) · Advanced Photonics · doi:10.1117/1.ap.4.3.034002 · Cited by 21
“Polyethylene glycol diacrylate (PEGda) is a variant of PEG, and it can be synthesized or is commercially available.(109)”
BackgroundTwo-photon polymerization of a branched hollow fiber structure with predefined circular pores
Bieda, M., Bouchard, F., & Lasagni, A. F. (2015) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/j.jphotochem.2015.12.012 · Cited by 21
Wittig, R., Waller, E. H., von Freymann, G., & Steiner, R. W. (2012) · Journal of Laser Applications · doi:10.2351/1.4728135 · Cited by 20
Ha, C. W., Prabhakaran, P., & Lee, K.-S. (2018) · MRS Communications · doi:10.1557/mrc.2018.218 · Cited by 18
Mihăilescu, M., Păun, I. A., Zamfirescu, M., Luculescu, C. R., Acasandrei, A., & Dinescu, M. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-9723-z · Cited by 18
“A major advantage of 2PP_DW is the ability to provide complex 3D architectures with submicrometer down to tens of nanometers spatial resolution [15].”
BackgroundAdvanced optical methods and materials for fabricating 3D tissue scaffolds
Li, X., Lu, W., Xu, X., Wang, Y., & Chen, S. (2022) · Light Advanced Manufacturing · doi:10.37188/lam.2022.026 · Cited by 17
Additive Manufacturing for Tissue Engineering
Miar, S., Shafiee, A., Guda, T., & Narayan, R. J. (2018) · Springer eBooks · doi:10.1007/978-3-319-45444-3_2 · Cited by 16
Recent Advances and Challenges in Multi-Photon 3D Nanoprinting
Chen, F., Shi, S., Xue, S., Hu, H., Zhang, Z., Fan, X., Zhang, M., Wang, X., Zhao, Z., Gao, H., et al. (2024) · Engineering · doi:10.1016/j.eng.2024.09.028 · Cited by 15
LTCC based bioreactors for cell cultivation
Bartsch, H., Welker, T., Welker, K., Witte, H., & Müller, J. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/104/1/012001 · Cited by 15
“In the current case, a urethane dimethacrylate (UDMA) scaffold produced via two-photon polymerization [15, 16] is Figure 8.”
Nonlocal Hanbury–Brown–Twiss interferometry and entanglement generation from Majorana bound states
Bose, S., & Sodano, P. (2011) · New Journal of Physics · doi:10.1088/1367-2630/13/8/085002 · Cited by 15
Two-Photon Polymerization in Tissue Engineering
Shpichka, A. I., Koroleva, A., Kuznetsova, D. S., Бурдуковский, В. Ф., Chichkov, B. N., Баграташвили, В. Н., & Timashev, P. S. (2018) · Springer eBooks · doi:10.1007/978-3-319-75801-5_3 · Cited by 15
Additive Manufacturing for Tissue Engineering
Miar, S., Shafiee, A., Guda, T., & Narayan, R. J. (2018) · Springer eBooks · doi:10.1007/978-3-319-40498-1_2-1 · Cited by 13
Santos, N., Fuentes-Lemus, E., & Ahumada, M. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00299g · Cited by 13
Ink Formulation and Selection for Biological Applications of Two-Photon Polymerization
Panda, S. M., Hosseinabadi, H. G., Fattel, H., Tripathy, U., & Miri, A. K. (2023) · ACS Applied Optical Materials · doi:10.1021/acsaom.3c00165 · Cited by 12
MSC differentiation on two-photon polymerized, stiffness and BMP2 modified biological copolymers
Böhrnsen, F., Krier, M., Grohmann, S., Hauptmann, N., Frant, M., Klaus, L., & Schliephake, H. (2019) · Biomedical Materials · doi:10.1088/1748-605x/ab0362 · Cited by 12
Advancing 3D Spheroid Research through 3D Scaffolds Made by Two-Photon Polymerization
Vitkūnaitė, E., Žymantaitė, E., Mlynska, A., Andrijec, D., Limanovskaja, K., Kaszynski, G., Matulis, D., Šakalys, V., & Jonušauskas, L. (2024) · Bioengineering · doi:10.3390/bioengineering11090902 · Cited by 9
Laser Structuring for Biomedical Applications
Buchberger, G., Muck, M., Plamadeala, C., & Heitz, J. (2023) · Springer series in optical sciences/SPringer series in optical sciences · doi:10.1007/978-3-031-14752-4_31 · Cited by 9
Novel biocompatible materials for in vivo two-photon polymerisation
Torgersen, J. (2013) · reposiTUm (TU Wien) · Cited by 7
Rekštytė, S., Jonušauskas, L., Žukauskas, A., Gervinskas, G., Malinauskas, M., & Juodkazis, S. (2014) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2040971 · Cited by 5
Jiménez‐Díaz, E., Peto‐Gutiérrez, C., Hautefeuille, M., & Fiordelisio, T. (2025) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/adeab9 · Cited by 3
“These scaffolds have significantly advanced our understanding of key biological processes such as cell migration, proliferation, and differentiation, offering critical insights into tissue development, regeneration, and disease progression [53–57].”
Photonic systems in 3D printing
Hossain, K. R., Wu, T., Shyeed, M. A., & Rahamatolla, M. (2025) · ChemPhysMater · doi:10.1016/j.chphma.2025.09.002 · Cited by 2
Engineered microenvironments for cancer study
Balhouse, B. N., Ivey, J. W., Khan, Z. M., & Verbridge, S. S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-817827-0.00060-6 · Cited by 2
Direct Laser Writing of Polymer-Ceramic and Hydrogel Microstructures by Two-Photon Polymerization
Käpylä, E. (2014) · Tampere University Institutional Repository (Tampere University) · Cited by 2
Matital, R. P., Колымагин, Д. А., & Vitukhnovsky, A. G. (2025) · Bulletin of the Russian Academy of Sciences Physics · doi:10.1134/s1062873825714989 · Cited by 1
Engineered Microenvironments for Cancer Study
Balhouse, B. N., Ivey, J. W., & Verbridge, S. S. (2015) · Elsevier eBooks · doi:10.1016/b978-0-323-35321-2.00020-0 · Cited by 1
Rekštytė, S., Mačiulaitis, J., Mačiulaitis, R., & Malinauskas, M. (2017) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2249579 · Cited by 1
Femtosecond Laser-Assisted Nanoscale 3D Printing of Hydrogels
Li, J., You, S., & Chen, S. (2021) · Springer eBooks · doi:10.1007/978-3-030-63647-0_43 · Cited by 1
Multi-material microstructures with novel stimuli-responsive properties
Gernhardt, M. (2021) · Queensland University of Technology · doi:10.5204/thesis.eprints.210195 · Cited by 1
Femtosecond Laser-Assisted Nanoscale 3D Printing of Hydrogels
Li, J., You, S., & Chen, S. (2021) · Springer eBooks · doi:10.1007/978-3-319-69537-2_43-1
Monitoring of cell-induced deformations in biocompatible hydrogels via 3D multiphoton grafting
Sanchenkova, K. (2016) · reposiTUm (TU Wien) · doi:10.34726/hss.2016.38521
Zeynali, A. M. H. (2021) · BOA (University of Milano-Bicocca)
Krier, M. (2023) · eDiss (Georg-August-Universität Göttingen) · doi:10.53846/goediss-9686
281Chapter 8 Functional 3D nanoprinting via femtosecond laser nonlinear lithography
Wang, X., Yue, Y., Chai, N., & Cheng, Y. (2025) · De Gruyter eBooks · doi:10.1515/9783111505190-008
Konta, A. A. (2022) · Nottingham ePrints (University of Nottingham)
Elomaa, L. (2015) · Aaltodoc (Aalto University)
Li, T., & Taguchi, Y. (2026) · Journal of Photopolymer Science and Technology · doi:10.2494/photopolymer.39.15
Metadata
- Authors
- Weiß, T., Schade, R., Laube, T., Berg, A., Hildebrand, G., Wyrwa, R., Schnabelrauch, M., & Liefeith, K.
- Affiliations
- Institute for Bioprocessing and Analytical Measurement Techniques (DE)
- Innovent (DE)
- Corresponding author
- Liefeith, Klaus
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2011-06
- Volume
- 13
- Issue
- 9
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2077710580
- Cited by
- 80
- References
- 92
- Citations by year
- 2026: 1 · 2025: 4 · 2024: 4 · 2023: 5 · 2022: 5 · 2021: 6 · 2020: 5 · 2019: 10 · 2018: 7 · 2017: 6 · 2016: 5 · 2015: 5 · 2014: 4 · 2013: 6 · 2012: 6
- FWCI
- 3.22
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Engineering Materials (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Nonlinear Optical Materials Studies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Keywords
- two-photon polymerization, 3D scaffolds, urethane dimethacrylate, poly(ethylene glycol) diacrylate, biocompatibility, chondrocyte adhesion, cell viability, scaffold implantation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.