The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Towards a Fundamental Understanding of the Improved Electrochemical Performance of Silicon–Carbon Composites
Abstract
Silicon–carbon composites consisting of Si particles embedded in a dense and non‐porous carbon matrix are prepared by the pyrolysis of intimate mixtures of poly(vinyl chloride) (PVC) and Si powder at 900 °C under a flow of N 2. In contrast to bare micrometer‐sized (1–10 μm) and nanometer‐sized (10–100 nm) Si powders, which show poor cycling behavior with almost no capacity remaining after 15 cycles, the texture of the composite is seen to greatly enhance the reversibility of the alloying reaction of Si with Li. For instance, a capacity of ca. 1000 mA h g–1 is achieved for 20 cycles (0–2.0 V vs. Li+/Li) for a silicon–carbon composite containing nanometer‐sized Si particles. We also demonstrate that a mild manual grinding treatment degrades the cycling performance of the composites to levels as low as the parent Si, even though free Si is not released. The electrochemical measurements in conjunction with Raman spectroscopy data indicate that a huge stress is exerted on the Si domains by the in situ formed carbon. This carbon‐induced stress is found to disappear during the milling of the composites, indicating that the carbon‐induced pressure, along with the accompanying improvement in electrical connectivity, are the key parameters for the improved cycling behavior of Si versus Li.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage Material
Idota, Y., Kubota, T., Matsufuji, A., Maekawa, Y., & Miyasaka, T. (1997) · Science · doi:10.1126/science.276.5317.1395 · Cited by 2,578
Structural Changes in Silicon Anodes during Lithium Insertion/Extraction
Obrovac, M. N., & Christensen, L. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1652421 · Cited by 1,995
Electrochemical lithiation of tin and tin-based intermetallics and composites
Winter, M., & Besenhard, J. O. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00191-7 · Cited by 1,676
Colossal Reversible Volume Changes in Lithium Alloys
Beaulieu, L. Y., Eberman, K. W., Turner, R. L., Krause, L. J., & Dahn, J. R. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1388178 · Cited by 1,241
All‐Solid Lithium Electrodes with Mixed‐Conductor Matrix
Boukamp, B. A., Lesh, G. C., & Huggins, R. A. (1981) · Journal of The Electrochemical Society · doi:10.1149/1.2127495 · Cited by 1,160
Will advanced lithium-alloy anodes have a chance in lithium-ion batteries?
Besenhard, J. O., Yang, J., & Winter, M. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02547-5 · Cited by 943
Highly Reversible Lithium Storage in Nanostructured Silicon
Graetz, J., Ahn, C. C., Yazami, R., & Fultz, B. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1596917 · Cited by 701
Cited by
Advanced Materials for Energy Storage
Liu, C., Li, F., Ma, L., & Cheng, H. (2010) · Advanced Materials · doi:10.1002/adma.200903328 · Cited by 4,765
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
Nanostructured silicon for high capacity lithium battery anodes
Szczech, J. R., & Jin, S. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00281j · Cited by 1,395
Wang, C., Wu, H., Chen, Z., McDowell, M. T., Cui, Y., & Bao, Z. (2013) · Nature Chemistry · doi:10.1038/nchem.1802 · Cited by 1,269
Hu, Y., Demir‐Cakan, R., Titirici, M., Müller, J., Schlögl, R., Antonietti, M., & Maier, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200704287 · Cited by 968
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
Lithium Batteries and the Solid Electrolyte Interphase (SEI)—Progress and Outlook
Adenusi, H., Chass, G. A., Passerini, S., Tian, K. V., & Chen, G. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202203307 · Cited by 830
Anisotropic Swelling and Fracture of Silicon Nanowires during Lithiation
Liu, X. H., Zheng, H., Zhong, L., Huang, S., Karki, K., Zhang, L. Q., Liu, Y., Kushima, A., Liang, W. T., Wang, J. W., et al. (2011) · Nano Letters · doi:10.1021/nl201684d · Cited by 809
Scalable synthesis of silicon-nanolayer-embedded graphite for high-energy lithium-ion batteries
Ko, M., Chae, S., Ma, J., Kim, N., Lee, H.-W., Cui, Y., & Cho, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.113 · Cited by 771
Deformation and stress in electrode materials for Li-ion batteries
Mukhopadhyay, A., & Sheldon, B. W. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.02.001 · Cited by 724
Nanostructured Carbon and Carbon Nanocomposites for Electrochemical Energy Storage Applications
Su, D. S., & Schlögl, R. (2010) · ChemSusChem · doi:10.1002/cssc.200900182 · Cited by 671
Prospective materials and applications for Li secondary batteries
Jeong, G., Kim, Y.-U., Kim, H., Kim, Y.-J., & Sohn, H.-J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00831a · Cited by 616
Reversible Storage of Lithium in Silver‐Coated Three‐Dimensional Macroporous Silicon
Yu, Y., Gu, L., Zhu, C., Tsukimoto, S., van Aken, P. A., & Maier, J. (2010) · Advanced Materials · doi:10.1002/adma.200903755 · Cited by 592
Surface and Interface Engineering of Silicon‐Based Anode Materials for Lithium‐Ion Batteries
Luo, W., Chen, X., Xia, Y., Chen, M., Wang, L., Wang, Q., Li, W., & Yang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701083 · Cited by 549
Yang, J., Wang, Y., Li, W., Wang, L., Fan, Y., Jiang, W., Luo, W., Wang, Y., Kong, B., Selomulya, C., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700523 · Cited by 500
Key Parameters Governing the Reversibility of Si/Carbon/CMC Electrodes for Li-Ion Batteries
Bridel, J.-S., Azaïs, T., Morcrette, M., Tarascon, J.-M., & Larcher, D. (2010) · Chemistry of Materials · doi:10.1021/cm902688w · Cited by 499
Self-citationRecent progress on silicon-based anode materials for practical lithium-ion battery applications
Li, P., Zhao, G., Zheng, X., Xu, X., Yao, C., Sun, W., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.07.014 · Cited by 480
Research progress on silicon/carbon composite anode materials for lithium-ion battery
Shen, X., Tian, Z., Fan, R., Shao, L., Zhang, D., Cao, G., Kou, L., & Bai, Y. (2018) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.12.012 · Cited by 451
Recent advancement of SiOx based anodes for lithium-ion batteries
Chen, T., Wu, J., Zhang, Q., & Su, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.073 · Cited by 427
Recent progress in advanced electrode materials, separators and electrolytes for lithium batteries
Zhang, H., Zhao, H., Khan, M. A., Zou, W., Xu, J., Zhang, L., & Zhang, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05336g · Cited by 416
Lithium insertion/extraction mechanism in alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.08.114 · Cited by 366
Zhang, R., Du, Y., Li, D., Shen, D., Yang, J., Guo, Z., Liu, H. K., Elzatahry, A. A., & Zhao, D. (2014) · Advanced Materials · doi:10.1002/adma.201402813 · Cited by 299
Lithium alloys and metal oxides as high-capacity anode materials for lithium-ion batteries
Liang, C., Gao, M., Pan, H., Liu, Y., & Yan, M. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.04.001 · Cited by 270
Chen, Z., Wang, C., Lopez, J., Lu, Z., Cui, Y., & Bao, Z. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401826 · Cited by 270
Silicon Inverse‐Opal‐Based Macroporous Materials as Negative Electrodes for Lithium Ion Batteries
Esmanski, A., & Ozin, G. A. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900306 · Cited by 269
Fu, Y., Wei, Q., Zhang, G., & Sun, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702849 · Cited by 260
Metadata
- Authors
- Saint, J., Morcrette, M., Larcher, D., Laffont, L., Beattie, S., Pérès, J. ‐., Talaga, D., Couzi, M., & Tarascon, J. ‐.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2007-06-20
- Volume
- 17
- Issue
- 11
- Pages
- 1765-1774
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2069463486
- Cited by
- 296
- References
- 21
- FWCI
- 11.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.