The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Correlations between Percolation Threshold, Dispersion State, and Aspect Ratio of Carbon Nanotubes
Abstract
Critical factors that determine the percolation threshold of carbon nanotube (CNT)‐reinforced polymer nanocomposites are studied. An improved analytical model is developed based on an interparticle distance concept. Two dispersion parameters are introduced in the model to correctly reflect the different dispersion states of CNTs in the matrix—entangled bundles and well‐dispersed individual CNTs. CNT–epoxy nanocomposites with different dispersion states are fabricated from the same constituent materials by employing different processing conditions. The corresponding percolation thresholds of the nanocomposites vary over a wide range, from 0.1 to greater than 1.0 wt %, and these variations are explained in terms of dispersion parameters and aspect ratios of CNTs. Important factors that control the percolation threshold of nanocomposites are identified based on the comparison between modeling data and experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dispersion and alignment of carbon nanotubes in polymer matrix: A review
XIE, X., MAI, Y., & ZHOU, X. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2005.04.002 · Cited by 1,960
Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites
Sandler, J. K. W., Kirk, J. E., Kinloch, I. A., Shaffer, M. S. P., & Windle, A. H. (2003) · Polymer · doi:10.1016/s0032-3861(03)00539-1 · Cited by 1,699
Gojny, F. H., Wichmann, M. H. G., Fiedler, B., Kinloch, I. A., Bauhofer, W., Windle, A. H., & Schulte, K. (2006) · Polymer · doi:10.1016/j.polymer.2006.01.029 · Cited by 1,113
Mechanical and electrical properties of a MWNT/epoxy composite
Allaoui, A. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00129-x · Cited by 1,059
Dispersion of Carbon Nanotubes in Liquids
Hilding, J., Grulke, E. A., George Zhang, Z., & Lockwood, F. (2003) · Journal of Dispersion Science and Technology · doi:10.1081/dis-120017941 · Cited by 668
Electrical properties of single wall carbon nanotube reinforced polyimide composites
Ounaies, Z. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00067-8 · Cited by 662
Foygel, M., Morris, R. D., Anez, D., French, S., & Sobolev, V. L. (2005) · Physical Review B · doi:10.1103/physrevb.71.104201 · Cited by 655
Formation of percolating networks in multi-wall carbon-nanotube–epoxy composites
Martin, C. A., Sandler, J. K. W., Shaffer, M. S. P., Schwarz, M.-K., Bauhofer, W., Schulte, K., & Windle, A. H. (2004) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.01.025 · Cited by 628
Very Low Conductivity Threshold in Bulk Isotropic Single‐Walled Carbon Nanotube–Epoxy Composites
Bryning, M. B., Islam, M. F., Kikkawa, J. M., & Yodh, A. G. (2005) · Advanced Materials · doi:10.1002/adma.200401649 · Cited by 608
Functionalization of carbon nanotubes using a silane coupling agent
Ma, P. C., Kim, J.-K., & Tang, B. Z. (2006) · Carbon · doi:10.1016/j.carbon.2006.06.032 · Cited by 578
Self-citationThermal and electrical conductivity of single- and multi-walled carbon nanotube-epoxy composites
Moisala, A., Li, Q., Kinloch, I. A., & Windle, A. H. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.016 · Cited by 569
Critical concentration in percolating systems containing a high-aspect-ratio filler
Celzard, A., McRae, E., Deleuze, C., Dufort, M., Furdin, G., & Marêché, J. F. (1996) · Physical Review B · doi:10.1103/physrevb.53.6209 · Cited by 546
Li, J., & Kim, J.-K. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.11.010 · Cited by 516
Self-citationElectric field-induced aligned multi-wall carbon nanotube networks in epoxy composites
Martin, C. A., Sandler, J. K. W., Windle, A. H., Schwarz, M.-K., Bauhofer, W., Schulte, K., & Shaffer, M. S. P. (2005) · Polymer · doi:10.1016/j.polymer.2004.11.081 · Cited by 487
Percolation Thresholds in the Three-Dimensional Sticks System
Balberg, I., Binenbaum, N., & Wagner, N. (1984) · Physical Review Letters · doi:10.1103/physrevlett.52.1465 · Cited by 483
Resistivities of conductive composites
Ruschau, G. R., Yoshikawa, S., & Newnham, R. E. (1992) · Journal of Applied Physics · doi:10.1063/1.352350 · Cited by 401
Surface functionalities of multi-wall carbon nanotubes after UV/Ozone and TETA treatments
Sham, M.-L., & Kim, J.-K. (2006) · Carbon · doi:10.1016/j.carbon.2005.09.013 · Cited by 290
Self-citationGrujicic, M., Cao, G., & Roy, W. (2004) · Journal of Materials Science · doi:10.1023/b:jmsc.0000034136.11779.96 · Cited by 143
Cited by
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Ma, P.-C., Siddiqui, N. A., Marom, G., & Kim, J.-K. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.003 · Cited by 3,414
Self-citationPolymer nanocomposites based on functionalized carbon nanotubes
Sahoo, N. G., Rana, S., Cho, J. W., Li, L., & Chan, S. H. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.03.002 · Cited by 1,670
Review of thermal conductivity in composites: Mechanisms, parameters and theory
Burger, N., Laachachi, A., Ferriol, M., Lutz, M., Toniazzo, V., & Ruch, D. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.05.001 · Cited by 1,357
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
Tang, L.-C., Wan, Y.-J., Yan, D., Pei, Y.-B., Zhao, L., Li, Y.-B., Wu, L.-B., Jiang, J.-X., & Lai, G.-Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.050 · Cited by 1,169
Metadata
- Authors
- Li, J., Ma, P. C., Chow, W. S., To, C. K., Tang, B. Z., & Kim, J. ‐.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2007-09-05
- Volume
- 17
- Issue
- 16
- Pages
- 3207-3215
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2009812626
- Cited by
- 1,104
- References
- 18
- FWCI
- 12.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.