The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Correlations between Percolation Threshold, Dispersion State, and Aspect Ratio of Carbon Nanotubes
Abstract
Critical factors that determine the percolation threshold of carbon nanotube (CNT)‐reinforced polymer nanocomposites are studied. An improved analytical model is developed based on an interparticle distance concept. Two dispersion parameters are introduced in the model to correctly reflect the different dispersion states of CNTs in the matrix—entangled bundles and well‐dispersed individual CNTs. CNT–epoxy nanocomposites with different dispersion states are fabricated from the same constituent materials by employing different processing conditions. The corresponding percolation thresholds of the nanocomposites vary over a wide range, from 0.1 to greater than 1.0 wt %, and these variations are explained in terms of dispersion parameters and aspect ratios of CNTs. Important factors that control the percolation threshold of nanocomposites are identified based on the comparison between modeling data and experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dispersion and alignment of carbon nanotubes in polymer matrix: A review
XIE, X., MAI, Y., & ZHOU, X. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2005.04.002 · Cited by 1,960
Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites
Sandler, J. K. W., Kirk, J. E., Kinloch, I. A., Shaffer, M. S. P., & Windle, A. H. (2003) · Polymer · doi:10.1016/s0032-3861(03)00539-1 · Cited by 1,699
Gojny, F. H., Wichmann, M. H. G., Fiedler, B., Kinloch, I. A., Bauhofer, W., Windle, A. H., & Schulte, K. (2006) · Polymer · doi:10.1016/j.polymer.2006.01.029 · Cited by 1,113
Mechanical and electrical properties of a MWNT/epoxy composite
Allaoui, A. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00129-x · Cited by 1,059
Dispersion of Carbon Nanotubes in Liquids
Hilding, J., Grulke, E. A., George Zhang, Z., & Lockwood, F. (2003) · Journal of Dispersion Science and Technology · doi:10.1081/dis-120017941 · Cited by 668
Electrical properties of single wall carbon nanotube reinforced polyimide composites
Ounaies, Z. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00067-8 · Cited by 662
Foygel, M., Morris, R. D., Anez, D., French, S., & Sobolev, V. L. (2005) · Physical Review B · doi:10.1103/physrevb.71.104201 · Cited by 655
Formation of percolating networks in multi-wall carbon-nanotube–epoxy composites
Martin, C. A., Sandler, J. K. W., Shaffer, M. S. P., Schwarz, M.-K., Bauhofer, W., Schulte, K., & Windle, A. H. (2004) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.01.025 · Cited by 628
Very Low Conductivity Threshold in Bulk Isotropic Single‐Walled Carbon Nanotube–Epoxy Composites
Bryning, M. B., Islam, M. F., Kikkawa, J. M., & Yodh, A. G. (2005) · Advanced Materials · doi:10.1002/adma.200401649 · Cited by 608
Functionalization of carbon nanotubes using a silane coupling agent
Ma, P. C., Kim, J.-K., & Tang, B. Z. (2006) · Carbon · doi:10.1016/j.carbon.2006.06.032 · Cited by 578
Self-citation
Cited by
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Ma, P.-C., Siddiqui, N. A., Marom, G., & Kim, J.-K. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.003 · Cited by 3,414
Self-citationPolymer nanocomposites based on functionalized carbon nanotubes
Sahoo, N. G., Rana, S., Cho, J. W., Li, L., & Chan, S. H. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.03.002 · Cited by 1,670
Review of thermal conductivity in composites: Mechanisms, parameters and theory
Burger, N., Laachachi, A., Ferriol, M., Lutz, M., Toniazzo, V., & Ruch, D. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.05.001 · Cited by 1,357
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
Tang, L.-C., Wan, Y.-J., Yan, D., Pei, Y.-B., Zhao, L., Li, Y.-B., Wu, L.-B., Jiang, J.-X., & Lai, G.-Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.050 · Cited by 1,169
A review of recent research on mechanics of multifunctional composite materials and structures
Gibson, R. F. (2010) · Composite Structures · doi:10.1016/j.compstruct.2010.05.003 · Cited by 1,141
Physical Properties of Composites Near Percolation
Nan, C.-W., Shen, Y., & Ma, J. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104529 · Cited by 1,009
Choi, S., Han, S. I., Jung, D., Hwang, H. J., Lim, C., Bae, S., Park, O. K., Tschabrunn, C. M., Lee, M., Bae, S. Y., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0226-8 · Cited by 984
Sensors and actuators based on carbon nanotubes and their composites: A review
Li, C., Thostenson, E. T., & Chou, T.-W. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.006 · Cited by 934
PDMS with designer functionalities—Properties, modifications strategies, and applications
Wolf, M. P., Salieb-Beugelaar, G. B., & Hunziker, P. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.001 · Cited by 853
Stretchable nanoparticle conductors with self-organized conductive pathways
Kim, Y., Zhu, J., Yeom, B., Di Prima, M., Su, X., Kim, J.-G., Yoo, S. J., Uher, C., & Kotov, N. A. (2013) · Nature · doi:10.1038/nature12401 · Cited by 852
Self-citationThick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding
Abbasi, H., Antunes, M., & Velasco, J. I. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.02.003 · Cited by 744
Zhang, B., Kang, F., Tarascon, J.-M., & Kim, J.-K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.08.002 · Cited by 720
Self-citationSurface modifications for the effective dispersion of carbon nanotubes in solvents and polymers
Kim, S. W., Kim, T., Kim, Y. S., Choi, H. S., Lim, H. J., Yang, S. J., & Park, C. R. (2012) · Carbon · doi:10.1016/j.carbon.2011.08.011 · Cited by 695
Materials and Structures toward Soft Electronics
Wang, C., Wang, C., Huang, Z., & Xu, S. (2018) · Advanced Materials · doi:10.1002/adma.201801368 · Cited by 662
Evaluation of mild acid oxidation treatments for MWCNT functionalization
Avilés, F., Cauich-Rodríguez, J. V., Moo-Tah, L., May-Pat, A., & Vargas-Coronado, R. (2009) · Carbon · doi:10.1016/j.carbon.2009.06.044 · Cited by 615
Choi, S., Han, S. I., Kim, D., Hyeon, T., & Kim, D.-H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00706c · Cited by 591
Ma, P.-C., Mo, S.-Y., Tang, B.-Z., & Kim, J.-K. (2010) · Carbon · doi:10.1016/j.carbon.2010.01.028 · Cited by 577
Self-citationMaiti, U. N., Lee, W. J., Lee, J. M., Oh, Y., Kim, J. Y., Kim, J. E., Shim, J., Han, T. H., & Kim, S. O. (2014) · Advanced Materials · doi:10.1002/adma.201303265 · Cited by 544
Self-citationEstablishment, morphology and properties of carbon nanotube networks in polymer melts
Alig, I., Pötschke, P., Lellinger, D., Skipa, T., Pegel, S., Kasaliwal, G. R., & Villmow, T. (2012) · Polymer · doi:10.1016/j.polymer.2011.10.063 · Cited by 526
Epoxy composites with carbon nanotubes and graphene nanoplatelets – Dispersion and synergy effects
Yue, L., Pircheraghi, G., Monemian, S. A., & Manas-Zloczower, I. (2014) · Carbon · doi:10.1016/j.carbon.2014.07.003 · Cited by 492
Recent Progress in Graphene/Polymer Nanocomposites
Sun, X., Huang, C., Wang, L., Liang, L., Cheng, Y., Fei, W., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202001105 · Cited by 490
Ma, P.-C., Liu, M.-Y., Zhang, H., Wang, S.-Q., Wang, R., Wang, K., Wong, Y.-K., Tang, B.-Z., Hong, S.-H., Paik, K.-W., et al. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am9000503 · Cited by 430
Self-citationJeong, S., Kim, J., & Lee, J. (2020) · Advanced Materials · doi:10.1002/adma.202002075 · Cited by 415
Self-citationElectrical percolation in graphene–polymer composites
Marsden, A. J., Papageorgiou, D. G., Vallés, C., Liscio, A., Palermo, V, Bissett, M. A., Young, R. J., & Kinloch, I. A. (2018) · 2D Materials · doi:10.1088/2053-1583/aac055 · Cited by 396
Flexible temperature sensors: A review
Arman Kuzubasoglu, B., & Kursun Bahadir, S. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.112282 · Cited by 369
Effect of functionalized carbon nanotubes on the thermal conductivity of epoxy composites
Yang, S.-Y., Ma, C.-C. M., Teng, C.-C., Huang, Y.-W., Liao, S.-H., Huang, Y.-L., Tien, H.-W., Lee, T.-M., & Chiou, K.-C. (2010) · Carbon · doi:10.1016/j.carbon.2009.08.047 · Cited by 362
Mechanical, Thermal, and Electrical Properties of Graphene-Epoxy Nanocomposites—A Review
Atif, R., Shyha, I., & Inam, F. (2016) · Polymers · doi:10.3390/polym8080281 · Cited by 360
Feng, C., & Jiang, L. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.12.008 · Cited by 352
Choi, H.-J., Kim, M. S., Ahn, D., Yeo, S. Y., & Lee, S. (2019) · Scientific Reports · doi:10.1038/s41598-019-42495-1 · Cited by 345
Jia, J., Sun, X., Lin, X., Shen, X., Mai, Y.-W., & Kim, J.-K. (2014) · ACS Nano · doi:10.1021/nn500590g · Cited by 332
Self-citationLi, Y., Huang, X., Zeng, L., Li, R., Tian, H., Fu, X., Wang, Y., & Zhong, W.-H. (2019) · Journal of Materials Science · doi:10.1007/s10853-018-3006-9 · Cited by 321
Zhang, X., Li, B., Dong, L., Liu, H., Chen, W., Shen, Y., & Nan, C. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800096 · Cited by 309
Yousefi, N., Gudarzi, M. M., Zheng, Q., Aboutalebi, S. H., Sharif, F., & Kim, J.-K. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30590a · Cited by 299
Self-citationDesign of conductive composite elastomers for stretchable electronics
Park, M., Park, J., & Jeong, U. (2014) · Nano Today · doi:10.1016/j.nantod.2014.04.009 · Cited by 295
Wang, J., Jiu, J., Nogi, M., Sugahara, T., Nagao, S., Koga, H., He, P., & Suganuma, K. (2015) · Nanoscale · doi:10.1039/c4nr06494a · Cited by 293
A review of the interfacial characteristics of polymer nanocomposites containing carbon nanotubes
Chen, J., Liu, B., Gao, X., & Xu, D. (2018) · RSC Advances · doi:10.1039/c8ra04205e · Cited by 291
Electrical properties of polymer nanocomposites containing rod-like nanofillers
Mutiso, R. M., & Winey, K. I. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.06.002 · Cited by 288
Yousefi, N., Gudarzi, M. M., Zheng, Q., Lin, X., Shen, X., Jia, J., Sharif, F., & Kim, J.-K. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.02.005 · Cited by 278
Self-citationResearch progress of flexible capacitive pressure sensor for sensitivity enhancement approaches
Li, R., Zhou, Q., Bi, Y., Cao, S., Xia, X., Yang, A., Li, S., & Xiao, X. (2021) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.112425 · Cited by 276
Kashfipour, M. A., Mehra, N., & Zhu, J. (2018) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0022-9 · Cited by 273
Graphene Aerogel/Epoxy Composites with Exceptional Anisotropic Structure and Properties
Wang, Z., Shen, X., Akbari Garakani, M., Lin, X., Wu, Y., Liu, X., Sun, X., & Kim, J.-K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00146 · Cited by 272
Self-citationYousefi, N., Lin, X., Zheng, Q., Shen, X., Pothnis, J. R., Jia, J., Zussman, E., & Kim, J.-K. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.034 · Cited by 272
Self-citationMultifunctional properties of carbon nanotube/fly ash geopolymeric nanocomposites
Saafi, M., Andrew, K., Tang, P. L., McGhon, D., Taylor, S., Rahman, M., Yang, S., & Zhou, X. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.08.007 · Cited by 268
Shen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Self-citationSolution of the tunneling-percolation problem in the nanocomposite regime
Ambrosetti, G., Grimaldi, C., Balberg, I., Maeder, T., Danani, A., & Ryser, P. (2010) · Physical Review B · doi:10.1103/physrevb.81.155434 · Cited by 260
Gorgolis, G., & Galiotis, C. (2017) · 2D Materials · doi:10.1088/2053-1583/aa7883 · Cited by 259
Charged Carbon Nanomaterials: Redox Chemistries of Fullerenes, Carbon Nanotubes, and Graphenes
Clancy, A. J., Bayazit, M. K., Hodge, S. A., Skipper, N. T., Howard, C. A., & Shaffer, M. S. P. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00128 · Cited by 256
Metadata
- Authors
- Li, J., Ma, P. C., Chow, W. S., To, C. K., Tang, B. Z., & Kim, J. ‐.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2007-09-05
- Volume
- 17
- Issue
- 16
- Pages
- 3207-3215
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2009812626
- Cited by
- 1,104
- References
- 18
- FWCI
- 12.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.