The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Morphology Control in Solution‐Processed Bulk‐Heterojunction Solar Cell Mixtures
Abstract
The efficiency of bulk‐heterojunction solar cells is very sensitive to the nanoscale structure of the active layer. In the past, the final morphology in solution‐processed devices has been controlled by varying the casting solvent and by curing the layer using heat tempering or solvent soaking. A recipe for making the “best‐performing” morphology can be achieved using these steps. This article presents a review of several new techniques that have been developed to control the morphology in polymer/fullerene heterojunction mixtures. The techniques fall into two broad categories. First, the morphology can be controlled by preparing nanoparticle suspensions of one component. The size and shape of the nanoparticles in solution determine the size and shape of the domain in a mixed layer. Second, the morphology can be controlled by adding a secondary solvent or an additive that more strongly affects one component of the mixture during drying. In both cases, the as‐cast efficiency of the solar cell is improved with respect to the single‐solvent case, which strongly argues that morphology control is an issue that will receive increasing attention in future research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Two-dimensional charge transport in self-organized, high-mobility conjugated polymers
Sirringhaus, H., Brown, P. J., Friend, R. H., Nielsen, M. M., Bechgaard, K., Langeveld-Voss, B. M. W., Spiering, A. J. H., Janssen, R. A. J., Meijer, E. W., Herwig, P., et al. (1999) · Nature · doi:10.1038/44359 · Cited by 4,624
Ma, W., Yang, C., Gong, X., Lee, K., & Heeger, A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500211 · Cited by 4,565
Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing
Kim, J. Y., Lee, K., Coates, N. E., Moses, D., Nguyen, T.-Q., Dante, M., & Heeger, A. J. (2007) · Science · doi:10.1126/science.1141711 · Cited by 3,270
Efficient photodiodes from interpenetrating polymer networks
Halls, J. J. M., Walsh, C. A., Greenham, N. C., Marseglia, E. A., Friend, R. H., Moratti, S. C., & Holmes, A. B. (1995) · Nature · doi:10.1038/376498a0 · Cited by 3,258
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
Peet, J., Kim, J. Y., Coates, N. E., Ma, W. L., Moses, D., Heeger, A. J., & Bazan, G. C. (2007) · Nature Materials · doi:10.1038/nmat1928 · Cited by 3,202
Effects of Postproduction Treatment on Plastic Solar Cells
Padinger, F., Rittberger, R. S., & Sariciftci, N. S. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200390011 · Cited by 2,018
Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells
Lee, J. K., Ma, W. L., Brabec, C. J., Yuen, J., Moon, J. S., Kim, J. Y., Lee, K., Bazan, G. C., & Heeger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja710079w · Cited by 1,613
Nanoscale Morphology of High-Performance Polymer Solar Cells
Yang, X., Loos, J., Veenstra, S. C., Verhees, W. J. H., Wienk, M. M., Kroon, J. M., Michels, M. A. J., & Janssen, R. A. J. (2005) · Nano Letters · doi:10.1021/nl048120i · Cited by 1,543
Morphology of polymer/fullerene bulk heterojunction solar cells
Hoppe, H., & Sariciftci, N. S. (2006) · J. Mater. Chem. · doi:10.1039/b510618b · Cited by 1,414
Li, G., Yao, Y., Yang, H., Shrotriya, V., Yang, G., & Yang, Y. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600624 · Cited by 1,147
High-Performance Semiconducting Polythiophenes for Organic Thin-Film Transistors
Ong, B. S., Wu, Y., Liu, P., & Gardner, S. (2004) · Journal of the American Chemical Society · doi:10.1021/ja039772w · Cited by 1,041
Erb, T., Zhokhavets, U., Gobsch, G., Raleva, S., Stühn, B., Schilinsky, P., Waldauf, C., & Brabec, C. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400521 · Cited by 831
Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites
Chirvase, D., Parisi, J., Hummelen, J. C., & Dyakonov, V (2004) · Nanotechnology · doi:10.1088/0957-4484/15/9/035 · Cited by 723
Effects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells
Yao, Y., Hou, J., Xu, Z., Li, G., & Yang, Y. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701459 · Cited by 671
High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends
Hoth, C. N., Choulis, S. A., Schilinsky, P., & Brabec, C. J. (2007) · Advanced Materials · doi:10.1002/adma.200700911 · Cited by 513
Controlling Morphology in Polymer–Fullerene Mixtures
Moulé, A. J., & Meerholz, K. (2008) · Advanced Materials · doi:10.1002/adma.200701519 · Cited by 511
Self-citationPoly(3‐hexylthiophene) Fibers for Photovoltaic Applications
Berson, S., De Bettignies, R., Bailly, S., & Guillerez, S. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600922 · Cited by 504
Three-Dimensional Nanoscale Organization of Bulk Heterojunction Polymer Solar Cells
van Bavel, S. S., Sourty, E., de With, G., & Loos, J. (2008) · Nano Letters · doi:10.1021/nl8014022 · Cited by 498
Zhang, F., Jespersen, K. G., Björström, C., Svensson, M., Andersson, M. R., Sundström, V., Magnusson, K., Moons, E., Yartsev, A., & Inganäs, O. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500339 · Cited by 441
Markov, D. E., Amsterdam, E., Blom, P. W. M., Sieval, A. B., & Hummelen, J. C. (2005) · The Journal of Physical Chemistry A · doi:10.1021/jp0509663 · Cited by 432
Novel approaches to polymer blends based on polymer nanoparticles
Kietzke, T., Neher, D., Landfester, K., Montenegro, R., Güntner, R., & Scherf, U. (2003) · Nature Materials · doi:10.1038/nmat889 · Cited by 420
Mayer, A. C., Toney, M. F., Scully, S. R., Rivnay, J., Brabec, C. J., Scharber, M., Koppe, M., Heeney, M., McCulloch, I., & McGehee, M. D. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801684 · Cited by 405
Li, G., Shrotriya, V., Yao, Y., Huang, J., & Yang, Y. (2007) · Journal of Materials Chemistry · doi:10.1039/b703075b · Cited by 377
Effect of self-organization in polymer/fullerene bulk heterojunctions on solar cell performance
Shrotriya, V., Yao, Y., Li, G., & Yang, Y. (2006) · Applied Physics Letters · doi:10.1063/1.2335377 · Cited by 368
Rispens, M. T., Meetsma, A., Rittberger, R., Brabec, C. J., Sariciftci, N. S., & Hummelen, J. C. (2003) · Chem. Commun. · doi:10.1039/b305988j · Cited by 350
Phase Diagram of P3HT/PCBM Blends and Its Implication for the Stability of Morphology
Zhao, J., Swinnen, A., Van Assche, G., Manca, J., Vanderzande, D., & Mele, B. V. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp804151a · Cited by 350
Whiskers of poly(3‐alkylthiophene)s
Ihn, K. J., Moulton, J., & Smith, P. (1993) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1993.090310614 · Cited by 343
Savenije, T. J., Kroeze, J. E., Yang, X., & Loos, J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400559 · Cited by 255
Al-Ibrahim, M., Ambacher, O., Sensfuss, S., & Gobsch, G. (2005) · Applied Physics Letters · doi:10.1063/1.1929875 · Cited by 252
Li, L., Lu, G., & Yang, X. (2008) · Journal of Materials Chemistry · doi:10.1039/b719945g · Cited by 252
Moulé, A. J., Tsami, A., Bünnagel, T. W., Forster, M., Kronenberg, N. M., Scharber, M., Koppe, M., Morana, M., Brabec, C. J., Meerholz, K., et al. (2008) · Chemistry of Materials · doi:10.1021/cm8006638 · Cited by 183
Self-citationThompson, B. C., Kim, B. J., Kavulak, D. F. J., Sivula, K., Mauldin, C. E., & Fréchet, J. M. J. (2007) · Macromolecules · doi:10.1021/ma071649s · Cited by 99
Moulé, A. J., Allard, S., Kronenberg, N. M., Tsami, A., Scherf, U., & Meerholz, K. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp8043016 · Cited by 59
Self-citation
Cited by
Rational Design of High Performance Conjugated Polymers for Organic Solar Cells
Zhou, H., Yang, L., & You, W. (2012) · Macromolecules · doi:10.1021/ma201648t · Cited by 1,501
P3HT:PCBM, Best Seller in Polymer Photovoltaic Research
Dang, M. T., Hirsch, L., & Wantz, G. (2011) · Advanced Materials · doi:10.1002/adma.201100792 · Cited by 1,261
Low-Bandgap Near-IR Conjugated Polymers/Molecules for Organic Electronics
Dou, L., Liu, Y., Hong, Z., Li, G., & Yang, Y. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00165 · Cited by 1,222
Yip, H.-L., & Jen, A. K.-Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02806a · Cited by 1,117
Polymer–fullerene bulk heterojunction solar cells
Deibel, C., & Dyakonov, V. (2010) · Reports on Progress in Physics · doi:10.1088/0034-4885/73/9/096401 · Cited by 825
Metadata
- Authors
- Moulé, A. J., & Meerholz, K.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2009-10-05
- Volume
- 19
- Issue
- 19
- Pages
- 3028-3036
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2168812094
- Cited by
- 263
- References
- 35
- FWCI
- 28.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.