The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Highly Improved Rate Capability for a Lithium‐Ion Battery Nano‐Li4Ti5O12 Negative Electrode via Carbon‐Coated Mesoporous Uniform Pores with a Simple Self‐Assembly Method
Abstract
A mesostructured spinel Li 4 Ti 5 O 12 (LTO)‐carbon nanocomposite (denoted as Meso‐LTO‐C) with large (>15 nm) and uniform pores is simply synthesized via block copolymer self‐assembly. Exceptionally high rate capability is then demonstrated for Li‐ion battery (LIB) negative electrodes. Polyisoprene‐block‐poly(ethylene oxide) (PI‐b‐PEO) with a sp 2‐hybridized carbon‐containing hydrophobic block is employed as a structure‐directing agent. Then the assembled composite material is crystallized at 700 °C enabling conversion to the spinel LTO structure without loss of structural integrity. Part of the PI is converted to a conductive carbon that coats the pores of the Meso‐LTO‐C. The in situ pyrolyzed carbon not only maintains the porous mesostructure as the LTO is crystallized, but also improves the electronic conductivity. A Meso‐LTO‐C/Li cell then cycles stably at 10 C‐rate, corresponding to only 6 min for complete charge and discharge, with a reversible capacity of 115 mA h g−1 with 90% capacity retention after 500 cycles. In sharp contrast, a Bulk‐LTO/Li cell exhibits only 69 mA h g−1 at 10 C‐rate. Electrochemical impedance spectroscopy (EIS) with symmetric LTO/LTO cells prepared from Bulk‐LTO and Meso‐LTO‐C cycled in different potential ranges reveals the factors contributing to the vast difference between the rate‐capabilities. The carbon‐coated mesoporous structure enables highly improved electronic conductivity and significantly reduced charge transfer resistance, and a much smaller overall resistance is observed compared to Bulk‐LTO. Also, the solid electrolyte interphase (SEI)‐free surface due to the limited voltage window (>1 V versus Li/Li+) contributes to dramatically reduced resistance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
A new family of mesoporous molecular sieves prepared with liquid crystal templates
Beck, J. S., Vartuli, J. C., Roth, W. J., Leonowicz, M. E., Kresge, C. T., Schmitt, K. D., Chu, C. T. W., Olson, D. H., Sheppard, E. W., McCullen, S. B., et al. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00053a020 · Cited by 10,967
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Electrochemical methods: Fundamentals and applications
Vondrák, J. (1983) · Surface Technology · doi:10.1016/0376-4583(83)90080-8 · Cited by 4,688
Gas Adsorption Characterization of Ordered Organic−Inorganic Nanocomposite Materials
Kruk, M., & Jaroniec, M. (2001) · Chemistry of Materials · doi:10.1021/cm0101069 · Cited by 3,413
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries
Kang, K., Meng, Y. S., Bréger, J., Grey, C. P., & Ceder, G. (2006) · Science · doi:10.1126/science.1122152 · Cited by 2,638
Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493
Cabana, J., Monconduit, L., Larcher, D., & Palacín, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201000717 · Cited by 2,361
Zero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium Cells
Ohzuku, T., Ueda, A., & Yamamoto, N. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048592 · Cited by 1,940
A Neutral Templating Route to Mesoporous Molecular Sieves
Tanev, P. T., & Pinnavaia, T. J. (1995) · Science · doi:10.1126/science.267.5199.865 · Cited by 1,787
Titanium-containing mesoporous molecular sieves for catalytic oxidation of aromatic compounds
Tanev, P. T., Chibwe, M., & Pinnavaia, T. J. (1994) · Nature · doi:10.1038/368321a0 · Cited by 1,774
Templating of Mesoporous Molecular Sieves by Nonionic Polyethylene Oxide Surfactants
Bagshaw, S. A., Prouzet, E., & Pinnavaia, T. J. (1995) · Science · doi:10.1126/science.269.5228.1242 · Cited by 1,556
Silicon Nanotube Battery Anodes
Park, M.-H., Kim, M. G., Joo, J., Kim, K., Kim, J., Ahn, S., Cui, Y., & Cho, J. (2009) · Nano Letters · doi:10.1021/nl902058c · Cited by 1,493
Self-citationStudies of Lithium Intercalation into Carbons Using Nonaqueous Electrochemical Cells
Fong, R., von Sacken, U., & Dahn, J. R. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086855 · Cited by 1,452
Advanced Model for Solid Electrolyte Interphase Electrodes in Liquid and Polymer Electrolytes
Peled, E., Golodnitsky, D., & Ardel, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837858 · Cited by 1,205
Safety mechanisms in lithium-ion batteries
Balakrishnan, P. G., Ramesh, R., & Prem Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,132
Key challenges in future Li-battery research
Tarascon, J.-M. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0112 · Cited by 783
Ordered Mesoporous Metallic MoO2 Materials with Highly Reversible Lithium Storage Capacity
Shi, Y., Guo, B., Corr, S. A., Shi, Q., Hu, Y.-S., Heier, K. R., Chen, L., Seshadri, R., & Stucky, G. D. (2009) · Nano Letters · doi:10.1021/nl902423a · Cited by 683
Spinel Anodes for Lithium‐Ion Batteries
Ferg, E., Gummow, R. J., de Kock, A., & Thackeray, M. M. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2059324 · Cited by 661
Aurbach, D., Levi, M. D., Levi, E., Teller, H., Markovsky, B., Salitra, G., Heider, U., & Heider, L. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838758 · Cited by 654
Lee, J., Christopher Orilall, M., Warren, S. C., Kamperman, M., DiSalvo, F. J., & Wiesner, U. (2008) · Nature Materials · doi:10.1038/nmat2111 · Cited by 629
Self-citationStructure and electrochemistry of the spinel oxides LiTi2O4 and Li43Ti53O4
Colbow, K. M., Dahn, J. R., & Haering, R. R. (1989) · Journal of Power Sources · doi:10.1016/0378-7753(89)80152-1 · Cited by 612
Nanostructured Fe3O4/SWNT Electrode: Binder‐Free and High‐Rate Li‐Ion Anode
Ban, C., Wu, Z., Gillaspie, D. T., Chen, L., Yan, Y., Blackburn, J. L., & Dillon, A. C. (2010) · Advanced Materials · doi:10.1002/adma.200904285 · Cited by 580
Self-citationJung, Y. S., Cavanagh, A. S., Riley, L. A., Kang, S., Dillon, A. C., Groner, M. D., George, S. M., & Lee, S. (2010) · Advanced Materials · doi:10.1002/adma.200903951 · Cited by 560
Self-citationEvidence of Two‐Phase Formation upon Lithium Insertion into the Li1.33Ti1.67 O 4 Spinel
Scharner, S., Weppner, W., & Schmid‐Beurmann, P. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391692 · Cited by 538
Kim, H., & Cho, J. (2008) · Nano Letters · doi:10.1021/nl801853x · Cited by 513
Chen, C. H., Vaughey, J. T., Jansen, A. N., Dees, D. W., Kahaian, A. J., Goacher, T., & Thackeray, M. M. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1344523 · Cited by 464
Aurbach, D., Ein‐Eli, Y., Chusid (Youngman), O., Carmeli, Y., Babai, M., & Yamin, H. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054777 · Cited by 463
Disordered Molecular Sieve with Branched Mesoporous Channel Network
Ryoo, R., Kim, J. M., Ko, C. H., & Shin, C. H. (1996) · The Journal of Physical Chemistry · doi:10.1021/jp9620835 · Cited by 461
Self-citationAntonelli, D. M., & Ying, J. Y. (1996) · Angewandte Chemie International Edition in English · doi:10.1002/anie.199604261 · Cited by 446
Nitridation-Driven Conductive Li4Ti5O12 for Lithium Ion Batteries
Park, K., Benayad, A., Kang, D. J., & Doo, S. (2008) · Journal of the American Chemical Society · doi:10.1021/ja806104n · Cited by 415
Nanostructured Anode Material for High‐Power Battery System in Electric Vehicles
Amine, K., Belharouak, I., Chen, Z., Tran, T., Yumoto, H., Ota, N., Myung, S., & Sun, Y. (2010) · Advanced Materials · doi:10.1002/adma.201000441 · Cited by 396
Electrochemical lithium reactivity with nanotextured anatase-type TiO2
Sudant, G., Baudrin, E., Larcher, D., & Tarascon, J.-M. (2005) · Journal of Materials Chemistry · doi:10.1039/b416176a · Cited by 391
Development of a New Mesoporous Carbon Using an HMS Aluminosilicate Template
Lee, J., Yoon, S., Oh, S. M., Shin, C.-H., & Hyeon, T. (2000) · Advanced Materials · doi:10.1002/(sici)1521-4095(200003)12:5<359::aid-adma359>3.0.co;2-1 · Cited by 381
Self-citationUltrathin Coatings on Nano-LiCoO2for Li-Ion Vehicular Applications
Scott, I. D., Jung, Y. S., Cavanagh, A. S., Yan, Y., Dillon, A. C., George, S. M., & Lee, S.-H. (2011) · Nano Letters · doi:10.1021/nl1030198 · Cited by 379
Self-citationReversible Lithium‐Ion Insertion in Molybdenum Oxide Nanoparticles
Lee, S., Kim, Y., Deshpande, R., Parilla, P. A., Whitney, E., Gillaspie, D. T., Jones, K. M., Mahan, A. H., Zhang, S., & Dillon, A. C. (2008) · Advanced Materials · doi:10.1002/adma.200800999 · Cited by 343
Self-citationSorensen, E. M., Barry, S. J., Jung, H.-K., Rondinelli, J. M., Vaughey, J. T., & Poeppelmeier, K. R. (2006) · Chemistry of Materials · doi:10.1021/cm052203y · Cited by 303
A consideration of lithium cell safety
Tobishima, S., & Yamaki, J. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00240-7 · Cited by 291
Influence of Size on the Rate of Mesoporous Electrodes for Lithium Batteries
Ren, Y., Armstrong, A. R., Jiao, F., & Bruce, P. G. (2010) · Journal of the American Chemical Society · doi:10.1021/ja905488x · Cited by 282
Mesostructured γ-Al2O3with a Lathlike Framework Morphology
Zhang, Z., & Pinnavaia, T. J. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0208299 · Cited by 278
Synthesis of Nanowire and Mesoporous Low‐Temperature LiCoO2 by a Post‐Templating Reaction
Jiao, F., Shaju, K. M., & Bruce, P. G. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200501663 · Cited by 274
Yang, H., Bang, H., Amine, K., & Prakash, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1836126 · Cited by 270
Cheng, L., Yan, J., Zhu, G.-N., Luo, J.-Y., Wang, C.-X., & Xia, Y.-Y. (2010) · J. Mater. Chem. · doi:10.1039/b914604k · Cited by 256
Imhof, R., & Novák, P. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838420 · Cited by 251
Lithium Intercalation into Mesoporous Anatase with an Ordered 3D Pore Structure
Ren, Y., Hardwick, L. J., & Bruce, P. G. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907099 · Cited by 244
Preparation and electrochemical performance of Ag doped Li4Ti5O12
Huang, S., Wen, Z., Zhu, X., & Gu, Z. (2004) · Electrochemistry Communications · doi:10.1016/j.elecom.2004.08.013 · Cited by 234
Jiao, F., Bao, J., Hill, A. H., & Bruce, P. G. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200803431 · Cited by 223
Carbon-Coated Li[sub 4]Ti[sub 5]O[sub 12] as a High Rate Electrode Material for Li-Ion Intercalation
Cheng, L., Li, X.-L., Liu, H.-J., Xiong, H.-M., Zhang, P.-W., & Xia, Y.-Y. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2736644 · Cited by 221
Zaban, A., Zinigrad, E., & Aurbach, D. (1996) · The Journal of Physical Chemistry · doi:10.1021/jp9514279 · Cited by 205
Takai, S. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00095-8 · Cited by 186
Electrochemical characteristics of spinel Li4Ti5O12 discharged to 0.01V
Ge, H., Li, N., Li, D., Dai, C., & Wang, D. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.02.026 · Cited by 176
Fluorinated organic solvents in electrolytes for lithium ion cells
Möller, K., Hodal, T., Appel, W. K., Winter, M., & Besenhard, J. O. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00537-7 · Cited by 139
Harnessing the Actuation Potential of Solid‐State Intercalation Compounds
Koyama, Y., Chin, T. E., Rhyner, U., Holman, R. K., Hall, S. R., & Chiang, Y. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500633 · Cited by 118
New Insight into the Solid Electrolyte Interphase with Use of a Focused Ion Beam
Zhang, H., Li, F., Liu, C., Tan, J., & Cheng, H. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp053311a · Cited by 95
Inhibition of Lithium Dendrites by Fumed Silica-Based Composite Electrolytes
Zhang, X., Li, Y., Khan, S. A., & Fedkiw, P. S. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1767158 · Cited by 57
Cited by
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Alfaruqi, M. H., Mathew, V., Gim, J., Kim, S., Song, J., Baboo, J. P., Choi, S. H., & Kim, J. (2015) · Chemistry of Materials · doi:10.1021/cm504717p · Cited by 980
Self-citationTi-based compounds as anode materials for Li-ion batteries
Zhu, G.-N., Wang, Y.-G., & Xia, Y.-Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03410g · Cited by 862
Porous electrode materials for lithium-ion batteries–how to prepare them and what makes them special
Vu, A., Qian, Y., & Stein, A. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200320 · Cited by 719
Zhao, B., Ran, R., Liu, M., & Shao, Z. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.10.001 · Cited by 644
Metadata
- Authors
- Kang, E., Jung, Y. S., Kim, G., Chun, J., Wiesner, U., Dillon, A. C., Kim, J. K., & Lee, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2011-09-09
- Volume
- 21
- Issue
- 22
- Pages
- 4349-4357
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W1965269764
- Cited by
- 276
- References
- 60
- FWCI
- 20.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.