The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Direct Writing of Gallium‐Indium Alloy for Stretchable Electronics
Abstract
In this paper, a direct writing method for gallium‐indium alloys is presented. The relationships between nozzle inner diameter, standoff distance, flow rate, and the resulting trace geometry are demonstrated. The interaction between the gallium oxide layer and the substrate is critically important in understanding the printing behavior of the liquid metal. The difference between receding and advancing contact angles demonstrates that the adhesion of the oxide layer to the substrate surface is stronger than the wetting of the surface by the gallium‐indium alloy. This further demonstrates why free‐standing structures such as the traces described herein can be realized. In addition to the basic characterization of the direct writing process, a design algorithm that is generalizable to a range of trace geometries is developed. This method is applied to the fabrication of an elastomer‐encapsulated strain gauge that displays an approximately linear behavior through 50% strain with a gauge factor of 1.5.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Piner, R. D., Zhu, J., Xu, F., Hong, S., & Mirkin, C. A. (1999) · Science · doi:10.1126/science.283.5402.661 · Cited by 3,052
Dickey, M. D., Chiechi, R. C., Larsen, R. J., Weiss, E. A., Weitz, D. A., & Whitesides, G. M. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701216 · Cited by 1,468
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Reversibly Deformable and Mechanically Tunable Fluidic Antennas
So, J., Thelen, J., Qusba, A., Hayes, G. J., Lazzi, G., & Dickey, M. D. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900604 · Cited by 555
Three-dimensional nanonetworks for giant stretchability in dielectrics and conductors
Park, J., Wang, S., Li, M., Ahn, C., Hyun, J. K., Kim, D. S., Kim, D. K., Rogers, J. A., Huang, Y., & Jeon, S. (2012) · Nature Communications · doi:10.1038/ncomms1929 · Cited by 334
Liquid-Phase Gallium–Indium Alloy Electronics with Microcontact Printing
Tabatabai, A., Fassler, A., Usiak, C., & Majidi, C. (2013) · Langmuir · doi:10.1021/la401245d · Cited by 293
Masked Deposition of Gallium‐Indium Alloys for Liquid‐Embedded Elastomer Conductors
Kramer, R. K., Majidi, C., & Wood, R. J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203589 · Cited by 288
Self-citationOn the resistivity and surface tension of the eutectic alloy of gallium and indium
Zrnic, D., & Swatik, D. S. (1969) · Journal of the Less Common Metals · doi:10.1016/0022-5088(69)90121-0 · Cited by 231
Gong, P., Zheng, W., Huang, Z., Zhang, W., Xiao, D., & Jiang, X. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201275 · Cited by 77
Cited by
Stretchable and Soft Electronics using Liquid Metals
Dickey, M. D. (2017) · Advanced Materials · doi:10.1002/adma.201606425 · Cited by 1,776
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Liquid metals: fundamentals and applications in chemistry
Daeneke, T., Khoshmanesh, K., Mahmood, N., de Castro, I. A., Esrafilzadeh, D., Barrow, S. J., Dickey, M. D., & Kalantar-zadeh, K. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00043j · Cited by 1,222
Rich, S. I., Wood, R. J., & Majidi, C. (2018) · Nature Electronics · doi:10.1038/s41928-018-0024-1 · Cited by 1,022
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
Emerging Applications of Liquid Metals Featuring Surface Oxides
Dickey, M. D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5043017 · Cited by 719
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Materials and structural designs of stretchable conductors
Matsuhisa, N., Chen, X., Bao, Z., & Someya, T. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00814k · Cited by 566
Attributes, Fabrication, and Applications of Gallium‐Based Liquid Metal Particles
Lin, Y., Genzer, J., & Dickey, M. D. (2020) · Advanced Science · doi:10.1002/advs.202000192 · Cited by 503
Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing
Frutiger, A., Muth, J. T., Vogt, D. M., Mengüç, Y., Campo, A., Valentine, A. D., Walsh, C. J., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500072 · Cited by 468
Liquid metal enabled microfluidics
Khoshmanesh, K., Tang, S.-Y., Zhu, J. Y., Schaefer, S., Mitchell, A., Kalantar-zadeh, K., & Dickey, M. D. (2017) · Lab on a Chip · doi:10.1039/c7lc00046d · Cited by 458
3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T.-W., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 432
All‐Printed Flexible and Stretchable Electronics
Mohammed, M. G., & Kramer, R. (2017) · Advanced Materials · doi:10.1002/adma.201604965 · Cited by 410
Self-citationSoft Multifunctional Composites and Emulsions with Liquid Metals
Kazem, N., Hellebrekers, T., & Majidi, C. (2017) · Advanced Materials · doi:10.1002/adma.201605985 · Cited by 404
Elastomeric Electronic Skin for Prosthetic Tactile Sensation
Gerratt, A. P., Michaud, H. O., & Lacour, S. P. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404365 · Cited by 382
High-resolution, reconfigurable printing of liquid metals with three-dimensional structures
Park, Y.-G., An, H. S., Kim, J.-Y., & Park, J.-U. (2019) · Science Advances · doi:10.1126/sciadv.aaw2844 · Cited by 367
Polydimethylsiloxane (PDMS)-Based Flexible Resistive Strain Sensors for Wearable Applications
Chen, J., Zheng, J., Gao, Q., Zhang, J., Zhang, J., Omisore, O., Wang, L., & Li, H. (2018) · Applied Sciences · doi:10.3390/app8030345 · Cited by 332
Liquid Metal Direct Write and 3D Printing: A Review
Neumann, T. V., & Dickey, M. D. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000070 · Cited by 332
Methods to pattern liquid metals
Joshipura, I. D., Ayers, H. R., Majidi, C., & Dickey, M. D. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc00330j · Cited by 326
Suarez, F., Parekh, D. P., Ladd, C., Vashaee, D., Dickey, M. D., & Öztürk, M. C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.181 · Cited by 317
Shaping a Soft Future: Patterning Liquid Metals
Ma, J., Krisnadi, F., Vong, M. H., Kong, M., Awartani, O. M., & Dickey, M. D. (2023) · Advanced Materials · doi:10.1002/adma.202205196 · Cited by 311
Fast Fabrication of Flexible Functional Circuits Based on Liquid Metal Dual‐Trans Printing
Wang, Q., Yu, Y., Yang, J., & Liu, J. (2015) · Advanced Materials · doi:10.1002/adma.201502200 · Cited by 310
Smart Eutectic Gallium–Indium: From Properties to Applications
Zhao, Z., Soni, S., Lee, T., Nijhuis, C. A., & Xiang, D. (2023) · Advanced Materials · doi:10.1002/adma.202203391 · Cited by 300
Doudrick, K., Liu, S., Mutunga, E. M., Klein, K. L., Damle, V., Varanasi, K. K., & Rykaczewski, K. (2014) · Langmuir · doi:10.1021/la5012023 · Cited by 285
Liu, S., Yuen, M. C., White, E. L., Boley, J. W., Deng, B., Cheng, G. J., & Kramer-Bottiglio, R. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08722 · Cited by 283
Self-citationLiu, C., Huang, N., Xu, F., Tong, J., Chen, Z., Gui, X., Fu, Y., & Lao, C. (2018) · Polymers · doi:10.3390/polym10060629 · Cited by 274
Porous Conductive Textiles for Wearable Electronics
Ding, Y., Jiang, J., Wu, Y., Zhang, Y., Zhou, J., Zhang, Y., Huang, Q., & Zheng, Z. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00507 · Cited by 269
Three-dimensional flexible electronics using solidified liquid metal with regulated plasticity
Li, G., Zhang, M., Liu, S., Yuan, M., Wu, J., Yu, M., Teng, L., Xu, Z., Guo, J., Li, G., et al. (2023) · Nature Electronics · doi:10.1038/s41928-022-00914-8 · Cited by 258
Vacuum filling of complex microchannels with liquid metal
Lin, Y., Gordon, O., Khan, M. R., Vasquez, N., Genzer, J., & Dickey, M. D. (2017) · Lab on a Chip · doi:10.1039/c7lc00426e · Cited by 257
Liquid Metal Based Soft Robotics: Materials, Designs, and Applications
Wang, X., Guo, R., & Liu, J. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800549 · Cited by 255
Heterogeneous sensing in a multifunctional soft sensor for human-robot interfaces
Kim, T., Lee, S., Hong, T., Shin, G., Kim, T., & Park, Y.-L. (2020) · Science Robotics · doi:10.1126/scirobotics.abc6878 · Cited by 235
“An automated manufacturing process, such as direct patterning of liquid conductors ( 12 , 68 , 86 ) or embedded 3D printing ( 18 , 87 , 88 ), will be highly useful to increase the uniformity of the product in this case.”
MethodSoft optoelectronic sensory foams with proprioception
Van Meerbeek, I. M., De Sa, C. M., & Shepherd, R. F. (2018) · Science Robotics · doi:10.1126/scirobotics.aau2489 · Cited by 203
Nanofabrication for all-soft and high-density electronic devices based on liquid metal
Kim, M.-G., Brown, D. K., & Brand, O. (2020) · Nature Communications · doi:10.1038/s41467-020-14814-y · Cited by 186
Hong, S. Y., Oh, J. H., Park, H., Yun, J. Y., Jin, S. W., Sun, L., Zi, G., & Ha, J. S. (2017) · NPG Asia Materials · doi:10.1038/am.2017.194 · Cited by 117
Metadata
- Authors
- Boley, J. W., White, E. L., Chiu, G. T. ‐., & Kramer, R. K.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2014-02-18
- Volume
- 24
- Issue
- 23
- Pages
- 3501-3507
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2002527773
- Cited by
- 546
- References
- 9
- FWCI
- 19.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.