The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
ZnO Hard Templating for Synthesis of Hierarchical Porous Carbons with Tailored Porosity and High Performance in Lithium‐Sulfur Battery
Abstract
Hierarchical porous carbon (HPC, DUT‐106) with tailored pore structure is synthesized using a versatile approach based on ZnO nanoparticles avoiding limitations present in conventional silica hard templating approaches. The benefit of the process presented here is the removal of all pore building components by pyrolysis of the ZnO/carbon composite without any need for either toxic/reactive gases or purification of the as‐prepared hierarchical porous carbon. The carbothermal reduction process is accompanied by an advantageous growing of distinctive micropores within the thin carbon walls. The resulting materials show not only high internal porosity (total pore volume up to 3.9 cm 3 g−1) but also a large number of electrochemical reaction sites due to their remarkably high specific surface area (up to 3060 m 2 g−1), which renders them particularly suitable for the application as sulfur host material. Applied in the lithium‐sulfur battery, the HPC/sulfur composite exhibits a capacity of >1200 mAh g−1‐sulfur (>750 mAh g−1 electrode) at a high sulfur loading of ≥ 3 mg cm−2 as well as outstanding rate capability. In fact, this impressive performance is achieved even using a low amount of electrolyte (6.8 μl mg−1 sulfur) allowing for further weight reduction and maintenance of high energy density on cell level.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A comprehensive review of ZnO materials and devices
Özgür, Ü., Alivov, Y. I., Liu, C., Teke, A., Reshchikov, M. A., Doğan, S., Avrutin, V., Cho, S.-J., & Morkoç, H. (2005) · Journal of Applied Physics · doi:10.1063/1.1992666 · Cited by 11,463
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Synthesis of Highly Ordered Carbon Molecular Sieves via Template-Mediated Structural Transformation
Ryoo, R., Joo, S. H., & Jun, S. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp991673a · Cited by 2,450
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Meng, Y., Gu, D., Zhang, F., Shi, Y., Yang, H., Li, Z., Yu, C., Tu, B., & Zhao, D. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200501561 · Cited by 1,306
Meng, Y., Gu, D., Zhang, F., Shi, Y., Yang, H., Li, Z., Yu, C., Tu, B., & Zhao, D. (2005) · Angewandte Chemie · doi:10.1002/ange.200501561 · Cited by 1,270
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Bian, S.-W., Mudunkotuwa, I. A., Rupasinghe, T., & Grassian, V. H. (2011) · Langmuir · doi:10.1021/la200570n · Cited by 941
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
Controlled synthesis of nanostructured particles by flame spray pyrolysis
Mädler, L., Kammler, H. K., Mueller, R., & Pratsinis, S. E. (2002) · Journal of Aerosol Science · doi:10.1016/s0021-8502(01)00159-8 · Cited by 782
Yoo, H. D., Markevich, E., Salitra, G., Sharon, D., & Aurbach, D. (2014) · Materials Today · doi:10.1016/j.mattod.2014.02.014 · Cited by 664
Zhou, G., Wang, D.-W., Li, F., Hou, P.-X., Yin, L., Liu, C., Lu, G. Q. (., Gentle, I. R., & Cheng, H.-M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22294a · Cited by 518
Fechler, N., Fellinger, T., & Antonietti, M. (2013) · Advanced Materials · doi:10.1002/adma.201203422 · Cited by 510
High “C” rate Li-S cathodes: sulfur imbibed bimodal porous carbons
He, G., Ji, X., & Nazar, L. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01219c · Cited by 475
Tailoring Porosity in Carbon Nanospheres for Lithium–Sulfur Battery Cathodes
He, G., Evers, S., Liang, X., Cuisinier, M., Garsuch, A., & Nazar, L. F. (2013) · ACS Nano · doi:10.1021/nn404439r · Cited by 475
Optimization of mesoporous carbon structures for lithium–sulfur battery applications
Li, X., Cao, Y., Qi, W., Saraf, L. V., Xiao, J., Nie, Z., Mietek, J., Zhang, J.-G., Schwenzer, B., & Liu, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12979a · Cited by 454
Mecklenburg, M., Schuchardt, A., Mishra, Y. K., Kaps, S., Adelung, R., Lotnyk, A., Kienle, L., & Schulte, K. (2012) · Advanced Materials · doi:10.1002/adma.201200491 · Cited by 388
Yuan, L., Yuan, H., Qiu, X., Chen, L., & Zhu, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.149 · Cited by 369
High-rate lithium–sulfur batteries promoted by reduced graphene oxide coating
Li, N., Zheng, M., Lu, H., Hu, Z., Shen, C., Chang, X., Ji, G., Cao, J., & Shi, Y. (2012) · Chemical Communications · doi:10.1039/c2cc17912a · Cited by 331
Lee, J. T., Zhao, Y., Thieme, S., Kim, H., Oschatz, M., Borchardt, L., Magasinski, A., Cho, W., Kaskel, S., & Yushin, G. (2013) · Advanced Materials · doi:10.1002/adma.201301579 · Cited by 315
Self-citationDörfler, S., Hagen, M., Althues, H., Tübke, J., Kaskel, S., & Hoffmann, M. J. (2012) · Chemical Communications · doi:10.1039/c2cc17925c · Cited by 299
Self-citationKahn, M. L., Monge, M., Collière, V., Senocq, F., Maisonnat, A., & Chaudret, B. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400113 · Cited by 244
Elazari, R., Salitra, G., Talyosef, Y., et al. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3479828 · Cited by 177
Xu, G., Ding, B., Nie, P., Shen, L., Dou, H., & Zhang, X. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4038728 · Cited by 159
Thieme, S., Brückner, J., Bauer, I., Oschatz, M., Borchardt, L., Althues, H., & Kaskel, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10641a · Cited by 156
Self-citationA high sulfur content composite with core–shell structure as cathode material for Li–S batteries
Miao, L., Wang, W., Wang, A., et al. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12079a · Cited by 143
Revisit Carbon/Sulfur Composite for Li-S Batteries
Zheng, J., Gu, M. D., Wagner, M. J., Hays, K. A., Li, X., Zuo, P., Wang, C., Zhang, J., Liu, J., & Xiao, J. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.013310jes · Cited by 109
Oschatz, M., Thieme, S., Borchardt, L., Lohe, M. R., Biemelt, T., Brückner, J., Althues, H., & Kaskel, S. (2013) · Chemical Communications · doi:10.1039/c3cc42841a · Cited by 103
Self-citationRose, M., Kockrick, E., Senkovska, I., et al. (2009) · Carbon · doi:10.1016/j.carbon.2009.09.043 · Cited by 94
Cited by
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Interwoven MXene Nanosheet/Carbon‐Nanotube Composites as Li–S Cathode Hosts
Liang, X., Rangom, Y., Kwok, C. Y., Pang, Q., & Nazar, L. F. (2017) · Advanced Materials · doi:10.1002/adma.201603040 · Cited by 759
Carbon‐Supported Single Atom Catalysts for Electrochemical Energy Conversion and Storage
Peng, Y., Lu, B., & Chen, S. (2018) · Advanced Materials · doi:10.1002/adma.201801995 · Cited by 716
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Metadata
- Authors
- Strubel, P., Thieme, S., Biemelt, T., Helmer, A., Oschatz, M., Brückner, J., Althues, H., & Kaskel, S.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2014-11-19
- Volume
- 25
- Issue
- 2
- Pages
- 287-297
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W1996893881
- Cited by
- 352
- References
- 36
- FWCI
- 19.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.