The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Metal‐Phosphide‐Containing Porous Carbons Derived from an Ionic‐Polymer Framework and Applied as Highly Efficient Electrochemical Catalysts for Water Splitting
Abstract
A novel phosphorus‐containing porous polymer is efficiently prepared from tris(4‐vinylphenyl)phosphane by radical polymerization, and it can be easily ionized to form an ionic porous polymer after treatment with hydrogen iodide. Upon ionic exchange, transition‐metal‐containing anions, such as tetrathiomolybdate (MoS 4 2−) and hexacyanoferrate (Fe(CN)6 3−), are successfully loaded into the framework of the porous polymer to replace the original iodide anions, resulting in a polymer framework containing complex anions (termed HT‐Met, where Met = Mo or Fe). After pyrolysis under a hydrogen atmosphere, the HT‐Met materials are efficiently converted at a large scale to metal‐phosphide‐containing porous carbons (denoted as MetP@PC, where again Met = Mo or Fe). This approach provides a convenient pathway to the controlled preparation of metal‐phosphide‐loaded porous carbon composites. The MetP@PC composites exhibit superior electrocatalytic activity for the hydrogen evolution reaction (HER) under acidic conditions. In particular, MoP@PC with a low loading of 0.24 mg cm−2 (on a glass carbon electrode) affords an iR‐corrected (where i is current and R is resistance) current density of up to 10 mA cm−2 at 51 mV versus the reversible hydrogen electrode and a very low Tafel slope of 45 mV dec−1, in rotating disk measurements under saturated N 2 conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Kibsgaard, J., Chen, Z., Reinecke, B. N., & Jaramillo, T. F. (2012) · Nature Materials · doi:10.1038/nmat3439 · Cited by 3,234
Nanostructured Nickel Phosphide as an Electrocatalyst for the Hydrogen Evolution Reaction
Popczun, E. J., McKone, J. R., Read, C. G., Biacchi, A. J., Wiltrout, A. M., Lewis, N. S., & Schaak, R. E. (2013) · Journal of the American Chemical Society · doi:10.1021/ja403440e · Cited by 2,911
Nanostructured hydrotreating catalysts for electrochemical hydrogen evolution
Morales-Guio, C. G., Stern, L.-A., & Hu, X. (2014) · Chemical Society Reviews · doi:10.1039/c3cs60468c · Cited by 2,437
Tian, J., Liu, Q., Asiri, A. M., & Sun, X. (2014) · Journal of the American Chemical Society · doi:10.1021/ja503372r · Cited by 2,373
Molybdenum phosphide as an efficient electrocatalyst for the hydrogen evolution reaction
Xiao, P., Sk, M. A., Thia, L., Ge, X., Lim, R. J., Wang, J.-Y., Lim, K. H., & Wang, X. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00957f · Cited by 1,297
Chen, Z., Cummins, D., Reinecke, B. N., Clark, E., Sunkara, M. K., & Jaramillo, T. F. (2011) · Nano Letters · doi:10.1021/nl2020476 · Cited by 1,153
Kibsgaard, J., & Jaramillo, T. F. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408222 · Cited by 1,048
Jiang, P., Liu, Q., Liang, Y., Tian, J., Asiri, A. M., & Sun, X. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406848 · Cited by 885
Xing, Z., Liu, Q., Asiri, A. M., & Sun, X. (2014) · Advanced Materials · doi:10.1002/adma.201401692 · Cited by 835
Cited by
Shi, Y., & Zhang, B. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00434a · Cited by 3,253
Nanostructured catalysts for electrochemical water splitting: current state and prospects
Li, X., Hao, X., Abudula, A., & Guan, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02334g · Cited by 1,079
Nanoarchitectured Design of Porous Materials and Nanocomposites from Metal‐Organic Frameworks
Kaneti, Y. V., Tang, J., Salunkhe, R. R., Jiang, X., Yu, A., Wu, K. C. ‐., & Yamauchi, Y. (2017) · Advanced Materials · doi:10.1002/adma.201604898 · Cited by 888
Pu, Z., Liu, T., Amiinu, I. S., Cheng, R., Wang, P., Zhang, C., Ji, P., Hu, W., Liu, J., & Mu, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004009 · Cited by 604
Wang, R., Dong, X., Du, J., Zhao, J., & Zang, S. (2018) · Advanced Materials · doi:10.1002/adma.201703711 · Cited by 580
Metadata
- Authors
- Han, S., Feng, Y., Zhang, F., Yang, C., Yao, Z., Zhao, W., Qiu, F., Yang, L., Yao, Y., Zhuang, X., & Feng, X.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2015-05-15
- Volume
- 25
- Issue
- 25
- Pages
- 3899-3906
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W1649758964
- Cited by
- 191
- References
- 13
- FWCI
- 8.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Metal‐Phosphide‐Containing Porous Carbons Derived from an Ionic‐Polymer Framework and Applied as Highly Efficient Electrochemical Catalysts for Water Splitting. https://app.cochat.ai/papers/10.1002/adfm.201501390
- The paper
- Han, S., Feng, Y., Zhang, F., Yang, C., Yao, Z., Zhao, W., Qiu, F., Yang, L., Yao, Y., Zhuang, X., & Feng, X. (2015). Metal‐Phosphide‐Containing Porous Carbons Derived from an Ionic‐Polymer Framework and Applied as Highly Efficient Electrochemical Catalysts for Water Splitting. Advanced Functional Materials. https://doi.org/10.1002/adfm.201501390
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.