The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Carbon Fiber Reinforced Thermoset Composite with Near 100% Recyclability
Abstract
Both environmental and economic factors have driven the development of recycling routes for the increasing amount of composite waste generated. This paper presents a new paradigm to fully recycle epoxy‐based carbon fiber reinforced polymer (CFRP) composites. After immersing the composite in ethylene glycol (EG) and increasing the temperature, the epoxy matrix can be dissolved as the EG molecules participate in bond exchange reactions (BERs) within the covalent adaptable network (CAN), effectively breaking the long polymer chains into small segments. The clean carbon fibers can be then reclaimed with the same dimensions and mechanical properties as those of fresh ones. Both the dissolution rate and the minimum amount of EG required to fully dissolve the CAN are experimentally determined. Further heating the dissolved solution leads to repolymerization of the epoxy matrix, so a new generation of composite can be fabricated by using the recycled fiber and epoxy; in this way a closed‐loop near 100% recycling paradigm is realized. In addition, epoxy composites with surface damage are shown to be fully repaired. Both the recycled and the repaired composites exhibit the same level of mechanical properties as fresh materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Einstein, A. (1905) · Annalen der Physik · doi:10.1002/andp.19053220806 · Cited by 8,265
Silica-Like Malleable Materials from Permanent Organic Networks
Montarnal, D., Capelot, M., Tournilhac, F., & Leibler, L. (2011) · Science · doi:10.1126/science.1212648 · Cited by 3,625
Mehrer, H. (2007) · Springer Series in Solid-State Sciences · doi:10.1007/978-3-540-71488-0 · Cited by 1,503
Recent advances in dynamic covalent chemistry
Jin, Y., Yu, C., Denman, R. J., & Zhang, W. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60044k · Cited by 1,487
Recycling technologies for thermoset composite materials—current status
Pickering, S. J. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.030 · Cited by 1,278
Carbon Fibers and Their Composites
Morgan, P. (2005) · CRC Press eBooks · doi:10.1201/9781420028744 · Cited by 1,200
Metal-Catalyzed Transesterification for Healing and Assembling of Thermosets
Capelot, M., Montarnal, D., Tournilhac, F., & Leibler, L. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302894k · Cited by 1,198
Covalent Adaptable Networks (CANs): A Unique Paradigm in Cross-Linked Polymers
Kloxin, C. J., Scott, T. F., Adzima, B. J., & Bowman, C. N. (2010) · Macromolecules · doi:10.1021/ma902596s · Cited by 1,175
Ruiz de Luzuriaga, A., Martin, R., Markaide, N., Rekondo, A., Cabañero, G., Rodríguez, J., & Odriozola, I. (2016) · Materials Horizons · doi:10.1039/c6mh00029k · Cited by 886
Photoinduced Plasticity in Cross-Linked Polymers
Scott, T. F., Schneider, A. D., Cook, W. D., & Bowman, C. N. (2005) · Science · doi:10.1126/science.1110505 · Cited by 776
Cited by
Zheng, N., Xu, Y., Zhao, Q., & Xie, T. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00938 · Cited by 1,399
A Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications
Xia, Y., He, Y., Zhang, F., Liu, Y., & Leng, J. (2021) · Advanced Materials · doi:10.1002/adma.202000713 · Cited by 1,281
Current status of carbon fibre and carbon fibre composites recycling
Zhang, J., Chevali, V. S., Wang, H., & Wang, C.-H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108053 · Cited by 866
Vitrimers: Permanently crosslinked polymers with dynamic network topology
Van Zee, N. J., & Nicolaÿ, R. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101233 · Cited by 734
Closed-loop recycling of plastics enabled by dynamic covalent diketoenamine bonds
Christensen, P. R., Scheuermann, A. M., Loeffler, K. E., & Helms, B. A. (2019) · Nature Chemistry · doi:10.1038/s41557-019-0249-2 · Cited by 676
Zhang, Z. P., Rong, M. Z., & Zhang, M. Q. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.03.002 · Cited by 586
Wang, S., Ma, S., Li, Q., Xu, X., Wang, B., Yuan, W., Zhou, S., You, S., & Zhu, J. (2019) · Green Chemistry · doi:10.1039/c8gc03477j · Cited by 503
Naqvi, S. R., Prabhakara, H. M., Bramer, E. A., Dierkes, W., Akkerman, R., & Brem, G. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.013 · Cited by 484
Vitrimers: Current research trends and their emerging applications
Zheng, J., Png, Z. M., Ng, S. H., Tham, G. X., Ye, E., Goh, S. S., Loh, X. J., & Li, Z. (2021) · Materials Today · doi:10.1016/j.mattod.2021.07.003 · Cited by 480
Functional epoxy vitrimers and composites
Yang, Y., Xu, Y., Ji, Y., & Wei, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100710 · Cited by 463
Recyclable 3D printing of vitrimer epoxy
Shi, Q., Yu, K., Kuang, X., Mu, X., Dunn, C. K., Dunn, M. L., Wang, T., & Jerry Qi, H. (2017) · Materials Horizons · doi:10.1039/c7mh00043j · Cited by 460
Self-citationDegradable thermosets based on labile bonds or linkages: A review
Ma, S., & Webster, D. C. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.07.008 · Cited by 449
Eugenol-Derived Biobased Epoxy: Shape Memory, Repairing, and Recyclability
Liu, T., Hao, C., Wang, L., Li, Y., Liu, W., Xin, J., & Zhang, J. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01889 · Cited by 441
Payne, J., & Jones, M. D. (2021) · ChemSusChem · doi:10.1002/cssc.202100400 · Cited by 426
Vanillin-Based Epoxy Vitrimer with High Performance and Closed-Loop Recyclability
Memon, H., Liu, H., Rashid, M. A., Chen, L., Jiang, Q., Zhang, L., Wei, Y., Liu, W., & Qiu, Y. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02006 · Cited by 378
Liu, T., Zhao, B., & Zhang, J. (2020) · Polymer · doi:10.1016/j.polymer.2020.122392 · Cited by 364
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Wan, X., Luo, L., Liu, Y., & Leng, J. (2020) · Advanced Science · doi:10.1002/advs.202001000 · Cited by 337
Deng, J., Kuang, X., Liu, R., Ding, W., Wang, A. C., Lai, Y., Dong, K., Wen, Z., Wang, Y., Wang, L., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705918 · Cited by 329
Self-citationWorch, J. C., & Dove, A. P. (2020) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00582 · Cited by 308
Biopolymeric sustainable materials and their emerging applications
Arif, Z. U., Khalid, M. Y., Sheikh, M. F., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108159 · Cited by 288
Novel biopolymer-based sustainable composites for food packaging applications: A narrative review
Khalid, M. Y., & Arif, Z. U. (2022) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2022.100892 · Cited by 287
Liu, Y., Tang, Z., Wu, S., & Guo, B. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00012 · Cited by 286
Si, H., Zhou, L., Wu, Y., Song, L., Kang, M., Zhao, X., & Chen, M. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108278 · Cited by 279
Closed-loop chemical recycling of thermosetting polymers and their applications: a review
Liu, Y., Yu, Z., Wang, B., Li, P., Zhu, J., & Ma, S. (2022) · Green Chemistry · doi:10.1039/d2gc00368f · Cited by 278
Recovery of epoxy thermosets and their composites
Zhao, X., Long, Y., Xu, S., Liu, X., Chen, L., & Wang, Y.-Z. (2023) · Materials Today · doi:10.1016/j.mattod.2022.12.005 · Cited by 273
Kuang, X., Zhou, Y., Shi, Q., Wang, T., & Qi, H. J. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01538 · Cited by 272
Self-citationMemon, H., Wei, Y., Zhang, L., Jiang, Q., & Liu, W. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108314 · Cited by 262
Liu, Y.-Y., Liu, G.-L., Li, Y.-D., Weng, Y., & Zeng, J.-B. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c00231 · Cited by 257
Vitrimer composites: current status and future challenges
Schenk, V., Labastie, K., Destarac, M., Olivier, P., & Guerre, M. (2022) · Materials Advances · doi:10.1039/d2ma00654e · Cited by 253
Readily recyclable carbon fiber reinforced composites based on degradable thermosets: a review
Wang, B., Ma, S., Yan, S., & Zhu, J. (2019) · Green Chemistry · doi:10.1039/c9gc01760g · Cited by 246
Adaptable liquid crystal elastomers with transesterification-based bond exchange reactions
Hanzon, D. W., Traugutt, N. A., McBride, M. K., Bowman, C. N., Yakacki, C. M., & Yu, K. (2018) · Soft Matter · doi:10.1039/c7sm02110k · Cited by 128
Self-citationChemomechanics of dual-stage reprocessable thermosets
Luo, C., Zhang, B., Zhang, W., Yuan, C., Dunn, M., Ge, Q., & Yu, K. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2019.02.013 · Cited by 24
Self-citation
Metadata
- Authors
- Yu, K., Shi, Q., Dunn, M. L., Wang, T., & Qi, H. J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2016-07
- Volume
- 26
- Issue
- 33
- Pages
- 6098-6106
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2466076765
- Cited by
- 538
- References
- 24
- FWCI
- 19.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.