The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Carbon Fiber Reinforced Thermoset Composite with Near 100% Recyclability
Abstract
Both environmental and economic factors have driven the development of recycling routes for the increasing amount of composite waste generated. This paper presents a new paradigm to fully recycle epoxy‐based carbon fiber reinforced polymer (CFRP) composites. After immersing the composite in ethylene glycol (EG) and increasing the temperature, the epoxy matrix can be dissolved as the EG molecules participate in bond exchange reactions (BERs) within the covalent adaptable network (CAN), effectively breaking the long polymer chains into small segments. The clean carbon fibers can be then reclaimed with the same dimensions and mechanical properties as those of fresh ones. Both the dissolution rate and the minimum amount of EG required to fully dissolve the CAN are experimentally determined. Further heating the dissolved solution leads to repolymerization of the epoxy matrix, so a new generation of composite can be fabricated by using the recycled fiber and epoxy; in this way a closed‐loop near 100% recycling paradigm is realized. In addition, epoxy composites with surface damage are shown to be fully repaired. Both the recycled and the repaired composites exhibit the same level of mechanical properties as fresh materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Einstein, A. (1905) · Annalen der Physik · doi:10.1002/andp.19053220806 · Cited by 8,265
Silica-Like Malleable Materials from Permanent Organic Networks
Montarnal, D., Capelot, M., Tournilhac, F., & Leibler, L. (2011) · Science · doi:10.1126/science.1212648 · Cited by 3,625
Mehrer, H. (2007) · Springer Series in Solid-State Sciences · doi:10.1007/978-3-540-71488-0 · Cited by 1,503
Recent advances in dynamic covalent chemistry
Jin, Y., Yu, C., Denman, R. J., & Zhang, W. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60044k · Cited by 1,487
Recycling technologies for thermoset composite materials—current status
Pickering, S. J. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.030 · Cited by 1,278
Metal-Catalyzed Transesterification for Healing and Assembling of Thermosets
Capelot, M., Montarnal, D., Tournilhac, F., & Leibler, L. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302894k · Cited by 1,198
Covalent Adaptable Networks (CANs): A Unique Paradigm in Cross-Linked Polymers
Kloxin, C. J., Scott, T. F., Adzima, B. J., & Bowman, C. N. (2010) · Macromolecules · doi:10.1021/ma902596s · Cited by 1,175
Carbon Fibers and Their Composites
Morgan, P. (2005) · CRC Press eBooks · doi:10.1201/9781420028744 · Cited by 1,038
Ruiz de Luzuriaga, A., Martin, R., Markaide, N., Rekondo, A., Cabañero, G., Rodríguez, J., & Odriozola, I. (2016) · Materials Horizons · doi:10.1039/c6mh00029k · Cited by 886
Photoinduced Plasticity in Cross-Linked Polymers
Scott, T. F., Schneider, A. D., Cook, W. D., & Bowman, C. N. (2005) · Science · doi:10.1126/science.1110505 · Cited by 776
Covalent Adaptable Networks: Reversible Bond Structures Incorporated in Polymer Networks
Bowman, C. N., & Kloxin, C. J. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201200708 · Cited by 520
Chemical recycling of carbon fibre reinforced composites in nearcritical and supercritical water
Piñero-Hernanz, R., Dodds, C., Hyde, J., García-Serna, J., Poliakoff, M., Lester, E., Cocero, M. J., Kingman, S., Pickering, S., & Wong, K. H. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.01.001 · Cited by 366
Successful closed-loop recycling of thermoset composites
Palmer, J., Ghita, O. R., Savage, L., & Evans, K. E. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.02.002 · Cited by 363
Reprocessing and recycling of thermosetting polymers based on bond exchange reactions
Yu, K., Taynton, P., Zhang, W., Dunn, M. L., & Qi, H. J. (2014) · RSC Adv. · doi:10.1039/c3ra47438k · Cited by 241
Self-citationAutonomic healing of low-velocity impact damage in fiber-reinforced composites
Patel, A. J., Sottos, N. R., Wetzel, E. D., & White, S. R. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.11.002 · Cited by 198
Composite recycling in the construction industry
Conroy, A., Halliwell, S., & Reynolds, T. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.031 · Cited by 189
Yu, K., Taynton, P., Zhang, W., Dunn, M. L., & Qi, H. J. (2014) · RSC Adv. · doi:10.1039/c4ra06543c · Cited by 182
Self-citationDegradable epoxy resins prepared from diepoxide monomer with dynamic covalent disulfide linkage
Takahashi, A., Ohishi, T., Goseki, R., & Otsuka, H. (2016) · Polymer · doi:10.1016/j.polymer.2015.11.057 · Cited by 177
Recycling of the fibrous fraction of reinforced thermoset composites
Kouparitsas, C. E., Kartalis, C. N., Varelidis, P. C., Tsenoglou, C. J., & Papaspyrides, C. D. (2002) · Polymer Composites · doi:10.1002/pc.10468 · Cited by 167
Mechanical properties of ABS resin reinforced with recycled CFRP
Ogi, K., Nishikawa, T., Okano, Y., & Taketa, I. (2007) · Advanced Composite Materials · doi:10.1163/156855107780918982 · Cited by 117
Controlled degradation of disulfide-based epoxy thermosets for extreme environments
Johnson, L. M., Ledet, E. H., Huffman, N. D., Swarner, S., Shepherd, S. D., Durham, P. G., & Rothrock, G. D. (2015) · Polymer · doi:10.1016/j.polymer.2015.03.020 · Cited by 110
Stress Relaxation by Addition−Fragmentation Chain Transfer in Highly Cross-Linked Thiol−Yne Networks
Park, H., Kloxin, C. J., Scott, T. F., & Bowman, C. N. (2010) · Macromolecules · doi:10.1021/ma1020209 · Cited by 83
Cure kinetics of thermosetting bisphenol E cyanate ester
Sheng, X., Akinç, M., & Kessler, M. R. (2008) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-007-8803-3 · Cited by 73
Jiang, G., Pickering, S. J., Walker, G. S., Bowering, D., Wong, K. H., & Rudd, C. D. (2007) · Thermochimica Acta · doi:10.1016/j.tca.2007.01.003 · Cited by 67
Cited by
Zheng, N., Xu, Y., Zhao, Q., & Xie, T. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00938 · Cited by 1,399
A Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications
Xia, Y., He, Y., Zhang, F., Liu, Y., & Leng, J. (2021) · Advanced Materials · doi:10.1002/adma.202000713 · Cited by 1,281
Current status of carbon fibre and carbon fibre composites recycling
Zhang, J., Chevali, V. S., Wang, H., & Wang, C.-H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108053 · Cited by 866
Vitrimers: Permanently crosslinked polymers with dynamic network topology
Van Zee, N. J., & Nicolaÿ, R. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101233 · Cited by 734
Closed-loop recycling of plastics enabled by dynamic covalent diketoenamine bonds
Christensen, P. R., Scheuermann, A. M., Loeffler, K. E., & Helms, B. A. (2019) · Nature Chemistry · doi:10.1038/s41557-019-0249-2 · Cited by 676
Metadata
- Authors
- Yu, K., Shi, Q., Dunn, M. L., Wang, T., & Qi, H. J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2016-07
- Volume
- 26
- Issue
- 33
- Pages
- 6098-6106
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2466076765
- Cited by
- 538
- References
- 24
- FWCI
- 19.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.