The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage
Abstract
Conventional bulky and rigid power systems are incapable of meeting flexibility and breathability requirements for wearable applications. Despite the tremendous efforts dedicated to developing various 1D energy storage devices with sufficient flexibility, challenges remain pertaining to fabrication scalability, cost, and efficiency. Here, a scalable, low‐cost, and high‐efficiency 3D printing technology is applied to fabricate a flexible all‐fiber lithium‐ion battery (LIB). Highly viscous polymer inks containing carbon nanotubes and either lithium iron phosphate (LFP) or lithium titanium oxide (LTO) are used to print LFP fiber cathodes and LTO fiber anodes, respectively. Both fiber electrodes demonstrate good flexibility and high electrochemical performance in half‐cell configurations. All‐fiber LIB can be successfully assembled by twisting the as‐printed LFP and LTO fibers together with gel polymer as the quasi‐solid electrolyte. The all‐fiber device exhibits a high specific capacity of ≈110 mAh g−1 at a current density of 50 mA g−1 and maintains a good flexibility of the fiber electrodes, which can be potentially integrated into textile fabrics for future wearable electronic applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
A Survey on Wearable Sensor-Based Systems for Health Monitoring and Prognosis
Pantelopoulos, A., & Bourbakis, N. G. (2010) · IEEE Transactions on Systems Man and Cybernetics Part C (Applications and Reviews) · doi:10.1109/tsmcc.2009.2032660 · Cited by 2,296
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Flexible Energy‐Storage Devices: Design Consideration and Recent Progress
Wang, X., Lu, X., Liu, B., Chen, D., Tong, Y., & Shen, G. (2014) · Advanced Materials · doi:10.1002/adma.201400910 · Cited by 1,385
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Development and challenges of LiFePO4cathode material for lithium-ion batteries
Yuan, L.-X., Wang, Z.-H., Zhang, W.-X., Hu, X.-L., Chen, J.-T., Huang, Y.-H., & Goodenough, J. B. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00029a · Cited by 1,301
Flexible and Stretchable Energy Storage: Recent Advances and Future Perspectives
Liu, W., Song, M., Kong, B., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201603436 · Cited by 1,202
Chen, C., Wen, Y., Hu, X., Ji, X., Yan, M., Mai, L., Hu, P., Shan, B., & Huang, Y. (2015) · Nature Communications · doi:10.1038/ncomms7929 · Cited by 1,155
Self-citationHighly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Flexible energy storage devices based on nanocomposite paper
Pushparaj, V. L., Shaijumon, M. M., Kumar, A., Murugesan, S., Ci, L., Vajtai, R., Linhardt, R. J., Nalamasu, O., & Ajayan, P. M. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0706508104 · Cited by 1,116
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Meng, Y., Zhao, Y., Hu, C., Cheng, H., Hu, Y., Zhang, Z., Shi, G., & Qu, L. (2013) · Advanced Materials · doi:10.1002/adma.201300132 · Cited by 1,093
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Fabricated: The New World of 3D Printing
Lipson, H., & Kurman, M. (2013) · Cited by 1,032
Wen, Z., Yeh, M.-H., Guo, H., Wang, J., Zi, Y., Xu, W., Deng, J., Zhu, L., Wang, X., Hu, C., et al. (2016) · Science Advances · doi:10.1126/sciadv.1600097 · Cited by 854
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Twisting Carbon Nanotube Fibers for Both Wire‐Shaped Micro‐Supercapacitor and Micro‐Battery
Ren, J., Li, L., Chen, C., Chen, X., Cai, Z., Qiu, L., Wang, Y., Zhu, X., & Peng, H. (2013) · Advanced Materials · doi:10.1002/adma.201203445 · Cited by 786
Self-citationGraphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Self-citationLi, Y., Gao, T., Yang, Z., Chen, C., Luo, W., Song, J., Hitz, E., Jia, C., Zhou, Y., Liu, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700981 · Cited by 720
Self-citationRutile-TiO2 Nanocoating for a High-Rate Li4Ti5O12 Anode of a Lithium-Ion Battery
Wang, Y., Gu, L., Guo, Y., Li, H., He, X.-Q., Tsukimoto, S., Ikuhara, Y., & Wan, L. (2012) · Journal of the American Chemical Society · doi:10.1021/ja301266w · Cited by 630
Self-citationA Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Energy harvesting and storage in 1D devices
Sun, H., Zhang, Y., Zhang, J., Sun, X., & Peng, H. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.23 · Cited by 528
Flexible and Weaveable Capacitor Wire Based on a Carbon Nanocomposite Fiber
Ren, J., Bai, W., Guan, G., Zhang, Y., & Peng, H. (2013) · Advanced Materials · doi:10.1002/adma.201302498 · Cited by 478
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications
Fu, K., Yao, Y., Dai, J., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 475
Self-citationZhang, Y., Bai, W., Cheng, X., Ren, J., Weng, W., Chen, P., Fang, X., Zhang, Z., & Peng, H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201409366 · Cited by 394
Cable‐Type Flexible Lithium Ion Battery Based on Hollow Multi‐Helix Electrodes
Kwon, Y. H., Woo, S., Jung, H., Yu, H. K., Kim, K., Oh, B. H., Ahn, S., Lee, S., Song, S., Cho, J., et al. (2012) · Advanced Materials · doi:10.1002/adma.201202196 · Cited by 378
Rapid prototyping or rapid production? 3D printing processes move industry towards the latter
Bak, D. (2003) · Assembly Automation · doi:10.1108/01445150310501190 · Cited by 353
Shen, L., Zhang, X., Uchaker, E., Yuan, C., & Cao, G. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100720 · Cited by 339
Ruiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Zhang, Y., Bai, W., Cheng, X., Ren, J., Weng, W., Chen, P., Fang, X., Zhang, Z., & Peng, H. (2014) · Angewandte Chemie · doi:10.1002/ange.201409366 · Cited by 296
3D Porous Sponge‐Inspired Electrode for Stretchable Lithium‐Ion Batteries
Liu, W., Chen, Z., Zhou, G., Sun, Y., Lee, H. R., Liu, C., Yao, H., Bao, Z., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505299 · Cited by 287
High‐Performance, Stretchable, Wire‐Shaped Supercapacitors
Chen, T., Hao, R., Peng, H., & Dai, L. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409385 · Cited by 275
3D printing of multifunctional nanocomposites
Campbell, T. A., & Ivanova, O. S. (2013) · Nano Today · doi:10.1016/j.nantod.2012.12.002 · Cited by 261
Choi, K., Cho, S., Kim, S., Kwon, Y. H., Kim, J. Y., & Lee, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201301345 · Cited by 248
TiO2‐(B) Nanotubes as Anodes for Lithium Batteries: Origin and Mitigation of Irreversible Capacity
Brutti, S., Gentili, V., Menard, H., Scrosati, B., & Bruce, P. G. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100492 · Cited by 240
Xue, Y., Ding, Y., Niu, J., Xia, Z., Roy, A., Chen, H., Qu, J., Wang, Z. L., & Dai, L. (2015) · Science Advances · doi:10.1126/sciadv.1400198 · Cited by 217
Super-stretchy lithium-ion battery based on carbon nanotube fiber
Zhang, Y., Bai, W., Ren, J., Weng, W., Lin, H., Zhang, Z., & Peng, H. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01878h · Cited by 189
Hetero‐Nanonet Rechargeable Paper Batteries: Toward Ultrahigh Energy Density and Origami Foldability
Cho, S., Choi, K., Yoo, J., Kim, J., Lee, Y., Chun, S., Park, S., Choi, D., Wu, Q., Lee, S., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502833 · Cited by 140
Rao, R. B., Krafcik, K. L., Morales, A., et al. (2005) · Advanced Materials · doi:10.1002/adma.200400514 · Cited by 110
Cited by
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Smart textiles for personalized healthcare
Libanori, A., Chen, G., Zhao, X., Zhou, Y., & Chen, J. (2022) · Nature Electronics · doi:10.1038/s41928-022-00723-z · Cited by 739
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Li, H., Liu, Z., Liang, G., Huang, Y., Huang, Y., Zhu, M., Pei, Z., Xue, Q., Tang, Z., Wang, Y., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b09003 · Cited by 587
Self-citationScalable production of high-performing woven lithium-ion fibre batteries
He, J., Lu, C., Jiang, H., Han, F., Shi, X., Wu, J., Wang, L., Chen, T., Wang, J., Zhang, Y., et al. (2021) · Nature · doi:10.1038/s41586-021-03772-0 · Cited by 557
Self-citation
Metadata
- Authors
- Wang, Y., Chen, C., Xie, H., Gao, T., Yao, Y., Pastel, G., Han, X., Li, Y., Zhao, J., Fu, K. (., & Hu, L.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2017-09-14
- Volume
- 27
- Issue
- 43
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2754457159
- Cited by
- 374
- References
- 40
- FWCI
- 12.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.