The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage
Abstract
Conventional bulky and rigid power systems are incapable of meeting flexibility and breathability requirements for wearable applications. Despite the tremendous efforts dedicated to developing various 1D energy storage devices with sufficient flexibility, challenges remain pertaining to fabrication scalability, cost, and efficiency. Here, a scalable, low‐cost, and high‐efficiency 3D printing technology is applied to fabricate a flexible all‐fiber lithium‐ion battery (LIB). Highly viscous polymer inks containing carbon nanotubes and either lithium iron phosphate (LFP) or lithium titanium oxide (LTO) are used to print LFP fiber cathodes and LTO fiber anodes, respectively. Both fiber electrodes demonstrate good flexibility and high electrochemical performance in half‐cell configurations. All‐fiber LIB can be successfully assembled by twisting the as‐printed LFP and LTO fibers together with gel polymer as the quasi‐solid electrolyte. The all‐fiber device exhibits a high specific capacity of ≈110 mAh g−1 at a current density of 50 mA g−1 and maintains a good flexibility of the fiber electrodes, which can be potentially integrated into textile fabrics for future wearable electronic applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
A Survey on Wearable Sensor-Based Systems for Health Monitoring and Prognosis
Pantelopoulos, A., & Bourbakis, N. G. (2010) · IEEE Transactions on Systems Man and Cybernetics Part C (Applications and Reviews) · doi:10.1109/tsmcc.2009.2032660 · Cited by 2,296
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Flexible Energy‐Storage Devices: Design Consideration and Recent Progress
Wang, X., Lu, X., Liu, B., Chen, D., Tong, Y., & Shen, G. (2014) · Advanced Materials · doi:10.1002/adma.201400910 · Cited by 1,385
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Development and challenges of LiFePO4cathode material for lithium-ion batteries
Yuan, L.-X., Wang, Z.-H., Zhang, W.-X., Hu, X.-L., Chen, J.-T., Huang, Y.-H., & Goodenough, J. B. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00029a · Cited by 1,301
Flexible and Stretchable Energy Storage: Recent Advances and Future Perspectives
Liu, W., Song, M., Kong, B., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201603436 · Cited by 1,202
Chen, C., Wen, Y., Hu, X., Ji, X., Yan, M., Mai, L., Hu, P., Shan, B., & Huang, Y. (2015) · Nature Communications · doi:10.1038/ncomms7929 · Cited by 1,155
Self-citationHighly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Cited by
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Smart textiles for personalized healthcare
Libanori, A., Chen, G., Zhao, X., Zhou, Y., & Chen, J. (2022) · Nature Electronics · doi:10.1038/s41928-022-00723-z · Cited by 739
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Li, H., Liu, Z., Liang, G., Huang, Y., Huang, Y., Zhu, M., Pei, Z., Xue, Q., Tang, Z., Wang, Y., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b09003 · Cited by 587
Self-citationScalable production of high-performing woven lithium-ion fibre batteries
He, J., Lu, C., Jiang, H., Han, F., Shi, X., Wu, J., Wang, L., Chen, T., Wang, J., Zhang, Y., et al. (2021) · Nature · doi:10.1038/s41586-021-03772-0 · Cited by 557
Self-citationZhang, P., Wang, F., Yu, M., Zhuang, X., & Feng, X. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00561c · Cited by 514
Application Challenges in Fiber and Textile Electronics
Wang, L., Fu, X., He, J., Shi, X., Chen, T., Chen, P., Wang, B., & Peng, H. (2020) · Advanced Materials · doi:10.1002/adma.201901971 · Cited by 477
3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors
Yang, W., Yang, J., Byun, J. J., Moissinac, F. P., Xu, J., Haigh, S. J., Domingos, M., Bissett, M. A., Dryfe, R. A. W., & Barg, S. (2019) · Advanced Materials · doi:10.1002/adma.201902725 · Cited by 460
3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
Additive manufacturing for energy: A review
Sun, C., Wang, Y., McMurtrey, M. D., Jerred, N. D., Liou, F., & Li, J. (2021) · Applied Energy · doi:10.1016/j.apenergy.2020.116041 · Cited by 405
Self-citationThree-Dimensional Printed Thermal Regulation Textiles
Gao, T., Yang, Z., Chen, C., Li, Y., Fu, K., Dai, J., Hitz, E. M., Xie, H., Liu, B., Song, J., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b06295 · Cited by 378
Self-citationCarbon‐Nanomaterial‐Based Flexible Batteries for Wearable Electronics
Wu, Z., Wang, Y., Liu, X., Lv, C., Li, Y., Wei, D., & Liu, Z. (2019) · Advanced Materials · doi:10.1002/adma.201800716 · Cited by 350
Self-citationMo, F., Liang, G., Huang, Z., Li, H., Wang, D., & Zhi, C. (2020) · Advanced Materials · doi:10.1002/adma.201902151 · Cited by 343
3D Printed High‐Performance Lithium Metal Microbatteries Enabled by Nanocellulose
Cao, D., Xing, Y., Tantratian, K., Wang, X., Ma, Y., Mukhopadhyay, A., Cheng, Z., Zhang, Q., Jiao, Y., Chen, L., et al. (2019) · Advanced Materials · doi:10.1002/adma.201807313 · Cited by 337
3D printed electrochemical energy storage devices
Chang, P., Mei, H., Zhou, S., Dassios, K. G., & Cheng, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11860d · Cited by 329
Design and Manufacture of 3D-Printed Batteries
Lyu, Z., Lim, G. J. H., Koh, J. J., Li, Y., Ma, Y., Ding, J., Wang, J., Hu, Z., Wang, J., Chen, W., et al. (2021) · Joule · doi:10.1016/j.joule.2020.11.010 · Cited by 321
Self-citationAdvanced energy materials for flexible batteries in energy storage: A review
Kong, L., Tang, C., Peng, H., Huang, J., & Zhang, Q. (2020) · SmartMat · doi:10.1002/smm2.1007 · Cited by 316
Functional Fiber Materials to Smart Fiber Devices
Chen, C., Feng, J., Li, J., Guo, Y., Shi, X., & Peng, H. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00192 · Cited by 308
Self-citationYao, B., Chandrasekaran, S., Zhang, H., Ma, A., Kang, J., Zhang, L., Lu, X., Qian, F., Zhu, C., Duoss, E. B., et al. (2020) · Advanced Materials · doi:10.1002/adma.201906652 · Cited by 305
Self-citationSelf-Powered Sensing in Wearable Electronics─A Paradigm Shift Technology
Tang, W., Sun, Q., & Wang, Z. L. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00305 · Cited by 300
Additive Manufacturing of Batteries
Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906244 · Cited by 298
Direct ink writing of energy materials
Tagliaferri, S., Panagiotopoulos, A., & Mattevi, C. (2021) · Materials Advances · doi:10.1039/d0ma00753f · Cited by 281
Multi‐Functional Hydrogels for Flexible Zinc‐Based Batteries Working under Extreme Conditions
Zhao, S., Zuo, Y., Liu, T., Zhai, S., Dai, Y., Guo, Z., Wang, Y., He, Q., Xia, L., Zhi, C., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101749 · Cited by 277
Self-citationLiu, C., Huang, N., Xu, F., Tong, J., Chen, Z., Gui, X., Fu, Y., & Lao, C. (2018) · Polymers · doi:10.3390/polym10060629 · Cited by 274
Advanced Functional Fiber and Smart Textile
Shi, Q., Sun, J., Hou, C., Li, Y., Zhang, Q., & Wang, H. (2019) · Advanced Fiber Materials · doi:10.1007/s42765-019-0002-z · Cited by 270
Self-citationRecent Advances in Fiber‐Shaped Supercapacitors and Lithium‐Ion Batteries
Zhou, Y., Wang, C., Lu, W., & Dai, L. (2020) · Advanced Materials · doi:10.1002/adma.201902779 · Cited by 261
Metadata
- Authors
- Wang, Y., Chen, C., Xie, H., Gao, T., Yao, Y., Pastel, G., Han, X., Li, Y., Zhao, J., Fu, K. (., & Hu, L.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2017-09-14
- Volume
- 27
- Issue
- 43
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2754457159
- Cited by
- 374
- References
- 40
- FWCI
- 12.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.