The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
A Liquid Metal Based Multimodal Sensor and Haptic Feedback Device for Thermal and Tactile Sensation Generation in Virtual Reality
Abstract
Virtual reality (VR) has been widely used for training, gaming, and entertainment, and the value of VR is continually increasing as a contact‐free technology. For an immersive VR experience, measuring finger movements and providing appropriate feedback to the hand are as important as visual information, given the necessity of the hands for activities in daily life. Thus, a hand‐worn VR device with motion sensors and haptic feedback is desirable. In this paper, a multimodal sensing and feedback glove is developed with soft, stretchable, lightweight, and compact sensor and heater sheets manufactured by direct ink writing (DIW) of liquid metal, eutectic gallium‐indium (eGaIn). In the sensor sheet, ten sensors and three vibrators are embedded to measure finger movements and provide vibro‐haptic feedback. The other heater sheet provides thermo‐haptic sensation in accurate and rapid manner via model‐based feedback control even under stretched conditions. The multimodal sensing and feedback glove allows users to feel the contact status and discriminate materials with different temperature. Performance of the proposed multimodal glove is verified under VR environments including touching and pushing two blocks of different materials and grabbing a heated metal ball submerged in hot water.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Double-slit photoelectron interference in strong-field ionization of the neon dimer
Kunitski, M., Eicke, N., Huber, P., Köhler, J., Zeller, S., Voigtsberger, J., Schlott, N., Henrichs, K., Sann, H., Trinter, F., et al. (2019) · Nature Communications · doi:10.1038/s41467-018-07882-8 · Cited by 8,162
Lab-on-Skin: A Review of Flexible and Stretchable Electronics for Wearable Health Monitoring
Liu, Y., Pharr, M., & Salvatore, G. A. (2017) · ACS Nano · doi:10.1021/acsnano.7b04898 · Cited by 1,725
Biomechanical Properties of In Vivo Human Skin From Dynamic Optical Coherence Elastography
Liang, X., & Boppart, S. A. (2010) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2009.2033464 · Cited by 470
TIKL: Development of a Wearable Vibrotactile Feedback Suit for Improved Human Motor Learning
Lieberman, J., & Breazeal, C. (2007) · IEEE Transactions on Robotics · doi:10.1109/tro.2007.907481 · Cited by 272
Design of a virtual reality training system for human–robot collaboration in manufacturing tasks
Matsas, E., & Vosniakos, G.-C. (2017) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-015-0259-2 · Cited by 238
Cited by
Sun, Z., Zhu, M., Shan, X., & Lee, C. (2022) · Nature Communications · doi:10.1038/s41467-022-32745-8 · Cited by 532
Eutectics: formation, properties, and applications
Yu, D., Xue, Z., & Mu, T. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00404b · Cited by 351
Shi, Z., Meng, L., Shi, X., Li, H., Zhang, J., Sun, Q., Liu, X., Chen, J., & Liu, S. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00874-w · Cited by 282
Lee, J., Kwon, K., Soltis, I., Matthews, J., Lee, Y. J., Kim, H., Romero, L., Zavanelli, N., Kwon, Y., Kwon, S., et al. (2024) · npj Flexible Electronics · doi:10.1038/s41528-024-00297-0 · Cited by 77
Self-citation
Metadata
- Authors
- Oh, J., Kim, S., Lee, S., Jeong, S., Ko, S. H., & Bae, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2020-12-16
- Volume
- 31
- Issue
- 39
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3111841293
- Cited by
- 168
- References
- 5
- FWCI
- 7.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Liquid Metal Based Multimodal Sensor and Haptic Feedback Device for Thermal and Tactile Sensation Generation in Virtual Reality. https://app.cochat.ai/papers/10.1002/adfm.202007772
- The paper
- Oh, J., Kim, S., Lee, S., Jeong, S., Ko, S. H., & Bae, J. (2021). A Liquid Metal Based Multimodal Sensor and Haptic Feedback Device for Thermal and Tactile Sensation Generation in Virtual Reality. Advanced Functional Materials. https://doi.org/10.1002/adfm.202007772
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.