Fatigue‐Resistant Conducting Polymer Hydrogels as Strain Sensor for Underwater Robotics
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Conducting polymer hydrogels are widely used as strain sensors in light of their distinct skin‐like softness, strain sensitivity, and environmental adaptiveness in the fields of wearable devices, soft robots, and human‐machine interface. However, the mechanical and electrical properties of existing conducting polymer hydrogels, especially fatigue‐resistance and sensing robustness during long‐term application, are unsatisfactory, which severely hamper their practical utilities. Herein, a strategy to fabricate conducting polymer hydrogels with anisotropic structures and mechanics is presented through a combined freeze‐casting and salting‐out process. The as‐fabricated conducting polymer hydrogels exhibit high fatigue threshold (>300 J m−2), low Young's modulus (≈100 kPa), as well as long‐term strain sensing robustness (over 10 000 cycles). Such superior performance enables their application as strain sensors to monitor the real‐time movement of underwater robotics. The design and fabrication strategy for conducting polymer hydrogels reported in this study may open up an enticing avenue for functional soft materials in soft electronics and robotics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Trung, T. Q., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504244 · Cited by 2,160
Yang, J. C., Mun, J., Kwon, S. Y., Park, S., Bao, Z., & Park, S. (2019) · Advanced Materials · doi:10.1002/adma.201904765 · Cited by 1,641
Skin-inspired hydrogel–elastomer hybrids with robust interfaces and functional microstructures
Yuk, H., Zhang, T., Parada, G. A., Liu, X., & Zhao, X. (2016) · Nature Communications · doi:10.1038/ncomms12028 · Cited by 1,035
Cutaneous Ionogel Mechanoreceptors for Soft Machines, Physiological Sensing, and Amputee Prostheses
Shen, Z., Zhu, X., Majidi, C., & Gu, G. (2021) · Advanced Materials · doi:10.1002/adma.202102069 · Cited by 291
Cited by
Liu, J., Song, J., Zeng, L., & Hu, B. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25147994 · Cited by 28
“Biomimetic adhesives are applicable in biomedical and engineering sectors, such as underwater monitoring [96], underwater adhesion [21,97], membrane-based water treatment [98], and anti-fouling [99,100].”
BackgroundSelf-citation
Metadata
- Authors
- Zhang, Z., Chen, G., Xue, Y., Duan, Q., Liang, X., Lin, T., Wu, Z., Tan, Y., Zhao, Q., Zheng, W., Wang, L., Wang, F., Luo, X., Xu, J., Liu, J., & Lu, B.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2023-07-14
- Volume
- 33
- Issue
- 42
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W4384340397
- Cited by
- 221
- References
- 5
- FWCI
- 16.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fatigue‐Resistant Conducting Polymer Hydrogels as Strain Sensor for Underwater Robotics. https://app.cochat.ai/papers/10.1002/adfm.202305705
- The paper
- Zhang, Z., Chen, G., Xue, Y., Duan, Q., Liang, X., Lin, T., Wu, Z., Tan, Y., Zhao, Q., Zheng, W., Wang, L., Wang, F., Luo, X., Xu, J., Liu, J., & Lu, B. (2023). Fatigue‐Resistant Conducting Polymer Hydrogels as Strain Sensor for Underwater Robotics. Advanced Functional Materials. https://doi.org/10.1002/adfm.202305705
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.