The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
3D Bioprinting of Self‐Standing Silk‐Based Bioink
Abstract
Silk/polyethylene glycol (PEG) hydrogels are studied as self‐standing bioinks for 3D printing for tissue engineering. The two components of the bioink, silk fibroin protein (silk) and PEG, are both Food and Drug Administration approved materials in drug and medical device products. Mixing PEG with silk induces silk β‐sheet structure formation and thus gelation and water insolubility due to physical crosslinking. A variety of constructs with high resolution, high shape fidelity, and homogeneous gel matrices are printed. When human bone marrow mesenchymal stem cells are premixed with the silk solution prior to printing and the constructs are cultured in this medium, the cell‐loaded constructs maintain their shape over at least 12 weeks. Interestingly, the cells grow faster in the higher silk concentration (10%, w/v) gel than in lower ones (7.5 and 5%, w/v), likely due to the difference in material stiffness and the amount of residual PEG remaining in the gel related to material hydrophobicity. Subcutaneous implantation of 7.5% (w/v) bioink gels with and without printed fibroblast cells in mice reveals that the cells survive and proliferate in the gel matrix for at least 6 week postimplantation. The results suggest that these silk/PEG bioink gels may provide suitable scaffold environments for cell printing and function.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Zhang, W., Wang, X., Wang, S., Zhao, J., Xu, L., Zhu, C., Zeng, D., Chen, J., Zhang, Z., Kaplan, D. L., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.047 · Cited by 283
Self-citation
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Unagolla, J. M., & Jayasuriya, A. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100479 · Cited by 544
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
GhavamiNejad, A., Ashammakhi, N., Wu, X. Y., & Khademhosseini, A. (2020) · Small · doi:10.1002/smll.202002931 · Cited by 400
Metadata
- Authors
- Zheng, Z., Wu, J., Liu, M., Wang, H., Li, C., Rodriguez, M. J., Li, G., Wang, X., & Kaplan, D. L.
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2018-01-02
- Volume
- 7
- Issue
- 6
- Pages
- e1701026-e1701026
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W2781998348
- Cited by
- 241
- References
- 3
- FWCI
- 12.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Bioprinting of Self‐Standing Silk‐Based Bioink. https://app.cochat.ai/papers/10.1002/adhm.201701026
- The paper
- Zheng, Z., Wu, J., Liu, M., Wang, H., Li, C., Rodriguez, M. J., Li, G., Wang, X., & Kaplan, D. L. (2018). 3D Bioprinting of Self‐Standing Silk‐Based Bioink. Advanced Healthcare Materials. https://doi.org/10.1002/adhm.201701026
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.