Hybrid Nanocomposite Materials—between inorganic glasses and organic polymers
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
The sol–gel process, with its associated mild conditions, offers a new approach to the synthesis of composite materials with domain sizes approaching the molecular level. Transparent organic–inorganic composites can be prepared by dissolving preformed polymers into sot–gel precursor solutions, and then allowing the tetraalkyl orthosilicates to hydrolyze and condense to form glassy SiO 2 phases of different morphological structures. Alternatively, both the organic and inorganic phases can be simultaneously formed through the synchronous polymerization of the organic monomer and the sol–gel precursors. Depending upon such factors as the structures of the organic and inorganic components, the phase morphology, the degree of interpenetration, and the presence of covalent bonds between the phases, the properties of these composites can vary greatly and range from elastomeric rubbers to high–modulus materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Light Scattering by Small Particles
Van de Hulst, H. C., & Twersky, V. (1957) · Physics Today · doi:10.1063/1.3060205 · Cited by 5,619
Plueddemann, E. P. (1982) · Springer eBooks · doi:10.1007/978-1-4899-0342-6 · Cited by 2,719
Interpenetrating Polymer Networks and Related Materials
Sperling, L. H. (1981) · Springer eBooks · doi:10.1007/978-1-4684-3830-7 · Cited by 1,110
Ultrastructure processing of ceramics, glasses and composites
Uhlmann, D. R., & Ulrich, D. R. (1992) · Materials & Design · doi:10.1016/0261-3069(92)90249-h · Cited by 1,088
Manson, J. A., & Sperling, L. H. (1976) · Springer eBooks · doi:10.1007/978-1-4615-1761-0 · Cited by 1,003
Encapsulation of Proteins in Transparent Porous Silicate Glasses Prepared by the Sol-Gel Method
Ellerby, L. M., Nishida, C. R., Nishida, F., Yamanaka, S. A., Dunn, B., Valentine, J. S., & Zink, J. I. (1992) · Science · doi:10.1126/science.1312257 · Cited by 727
Richerson, D. W. (2005) · CRC Press eBooks · doi:10.1201/b18952 · Cited by 685
Homogeneous Catalysis of Hydrosilation by Transition Metals
Speier, J. L. (1979) · Advances in Organometallic Chemistry · doi:10.1016/s0065-3055(08)60328-7 · Cited by 576
Lubin, G. (1982) · Springer eBooks · doi:10.1007/978-1-4615-7139-1 · Cited by 522
Huang, H. H., Orler, B., & Wilkes, G. L. (1987) · Macromolecules · doi:10.1021/ma00172a026 · Cited by 455
Cited by
Polymer Layered Silicate Nanocomposites
Giannelis, E. P. (1996) · Advanced Materials · doi:10.1002/adma.19960080104 · Cited by 3,479
Applications of hybrid organic–inorganic nanocomposites
Sanchez, C., Julián, B., Belleville, P., & Popall, M. (2005) · Journal of Materials Chemistry · doi:10.1039/b509097k · Cited by 2,636
Review of bioactive glass: From Hench to hybrids
Jones, J. R. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.08.023 · Cited by 2,451
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
Zou, H., Wu, S., & Shen, J. (2008) · Chemical Reviews · doi:10.1021/cr068035q · Cited by 2,121
Structural engineering of polyurethane coatings for high performance applications
Chattopadhyay, D. K., & Raju, K. V. S. N. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.05.003 · Cited by 1,836
Large-Scale Synthesis of Aligned Carbon Nanotubes
Li, W. Z., Xie, S. S., Qian, L. X., Chang, B. H., Zou, B. S., Zhou, W. Y., Zhao, R. A., & Wang, G. (1996) · Science · doi:10.1126/science.274.5293.1701 · Cited by 1,711
Preparation and Mechanical Properties of Polypropylene−Clay Hybrids
Kawasumi, M., Hasegawa, N., Kato, M., Usuki, A., & Okada, A. (1997) · Macromolecules · doi:10.1021/ma961786h · Cited by 1,386
Designed Hybrid Organic−Inorganic Nanocomposites from Functional Nanobuilding Blocks
Sanchez, C., Soler-Illia, G. J. D. A. A., Ribot, F., Lalot, T., Mayer, C. R., & Cabuil, V. (2001) · Chemistry of Materials · doi:10.1021/cm011061e · Cited by 1,240
Synthesis and barrier properties of poly(ε‐caprolactone)‐layered silicate nanocomposites
Messersmith, P. B., & Giannelis, E. P. (1995) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1995.080330707 · Cited by 1,217
Organic/Inorganic Hybrid Network Materials by the Sol−Gel Approach
Wen, J., & Wilkes, G. L. (1996) · Chemistry of Materials · doi:10.1021/cm9601143 · Cited by 1,170
Hybrid organic–inorganic materials: a land of multidisciplinarity
Judeinstein, P., & Sanchez, C. (1996) · J. Mater. Chem. · doi:10.1039/jm9960600511 · Cited by 1,168
Polymeric membranes incorporated with metal/metal oxide nanoparticles: A comprehensive review
Ng, L. Y., Mohammad, A. W., Leo, C. P., & Hilal, N. (2013) · Desalination · doi:10.1016/j.desal.2010.11.033 · Cited by 1,033
Optically Transparent Composites Reinforced with Networks of Bacterial Nanofibers
Yano, H., Sugiyama, J., Nakagaito, A. N., Nogi, M., Matsuura, T., Hikita, M., & Handa, K. (2005) · Advanced Materials · doi:10.1002/adma.200400597 · Cited by 975
Optical Properties of Functional Hybrid Organic–Inorganic Nanocomposites
Sanchez, C., Lebeau, B., Chaput, F., & Boilot, J. ‐. (2003) · Advanced Materials · doi:10.1002/adma.200300389 · Cited by 886
Pyun, J., & Matyjaszewski, K. (2001) · Chemistry of Materials · doi:10.1021/cm011065j · Cited by 712
Reprint of: Review of bioactive glass: From Hench to hybrids
Jones, J. R. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.019 · Cited by 609
Structures of Novel Antimicrobial Agents for Textiles - A Review
Simoncic, B., & Tomsic, B. (2010) · Textile Research Journal · doi:10.1177/0040517510363193 · Cited by 604
Studies on thermal and mechanical properties of polyimide–clay nanocomposites
Agag, T., Koga, T., & Takeichi, T. (2001) · Polymer · doi:10.1016/s0032-3861(00)00824-7 · Cited by 599
Sol–gel coatings for corrosion protection of metals
Zheludkevich, M. L., Salvado, I. M., & Ferreira, M. G. S. (2005) · Journal of Materials Chemistry · doi:10.1039/b419153f · Cited by 527
Bioactive Glasses: Where Are We and Where Are We Going?
Baino, F., Hamzehlou, S., & Kargozar, S. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010025 · Cited by 525
Mechanical properties of hybrid organic–inorganic materials
Mammeri, F., Bourhis, E. L., Rozes, L., & Sanchez, C. (2005) · Journal of Materials Chemistry · doi:10.1039/b507309j · Cited by 512
Surface and Interface Engineering for Nanocellulosic Advanced Materials
Yang, X., Biswas, S. K., Han, J., Tanpichai, S., Li, M., Chen, C., Zhu, S., Das, A. K., & Yano, H. (2021) · Advanced Materials · doi:10.1002/adma.202002264 · Cited by 497
Bioceramics: From Bone Regeneration to Cancer Nanomedicine
Vallet‐Regí, M., & Ruiz‐Hernández, E. (2011) · Advanced Materials · doi:10.1002/adma.201101586 · Cited by 463
Peng, H., Stich, M. I. J., Yu, J., Sun, L., Fischer, L. H., & Wolfbeis, O. S. (2010) · Advanced Materials · doi:10.1002/adma.200901614 · Cited by 457
Kannan, R. Y., Salacinski, H. J., Butler, P. E., & Seifalian, A. M. (2005) · Accounts of Chemical Research · doi:10.1021/ar050055b · Cited by 423
Synthesis and Characterization of PMMA Nanocomposites by Suspension and Emulsion Polymerization
Huang, X., & Brittain, W. J. (2001) · Macromolecules · doi:10.1021/ma001670s · Cited by 419
Bioactive Glasses: Frontiers and Challenges
Hench, L. L., & Jones, J. R. (2015) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2015.00194 · Cited by 406
History of Organic–Inorganic Hybrid Materials: Prehistory, Art, Science, and Advanced Applications
Faustini, M., Nicole, L., Ruiz‐Hitzky, E., & Sanchez, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201704158 · Cited by 400
Vallet-Regí, M., Colilla, M., & González, B. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00025f · Cited by 394
Melt-Quenched Glasses of Metal–Organic Frameworks
Bennett, T. D., Yue, Y., Li, P., Qiao, A., Tao, H., Greaves, N. G., Richards, T., Lampronti, G. I., Redfern, S. A. T., Blanc, F., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13220 · Cited by 393
Thin-Film Deposition of Organic−Inorganic Hybrid Materials
Mitzi, D. B. (2001) · Chemistry of Materials · doi:10.1021/cm0101677 · Cited by 388
Mir, S. H., Nagahara, L. A., Thundat, T., Mokarian-Tabari, P., Furukawa, H., & Khosla, A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0191808jes · Cited by 386
Synthetic organo- and polymer–clays: preparation, characterization, and materials applications
Carrado, K. A. (2000) · Applied Clay Science · doi:10.1016/s0169-1317(00)00005-3 · Cited by 385
High refractive index organic–inorganic nanocomposites: design, synthesis and application
Lü, C., & Yang, B. (2009) · Journal of Materials Chemistry · doi:10.1039/b816254a · Cited by 383
Functionalisation of textiles by inorganic sol–gel coatings
Mahltig, B., Haufe, H., & Böttcher, H. (2005) · Journal of Materials Chemistry · doi:10.1039/b505177k · Cited by 379
Electrochemical Applications of Silica-Based Organic−Inorganic Hybrid Materials
Walcarius, A. (2001) · Chemistry of Materials · doi:10.1021/cm0110167 · Cited by 370
The amount of immobilized polymer in PMMA SiO2 nanocomposites determined from calorimetric data
Sargsyan, A., Tonoyan, A., Davtyan, S., & Schick, C. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.05.011 · Cited by 363
Tien, Y. I., & Wei, K. H. (2001) · Polymer · doi:10.1016/s0032-3861(00)00729-1 · Cited by 361
Transparent polymer nanocomposites: An overview on their synthesis and advanced properties
Loste, J., Lopez-Cuesta, J.-M., Billon, L., Garay, H., & Save, M. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.003 · Cited by 350
Ceramic‐reinforced polymers and polymer‐modified ceramics
Mark, J. E. (1996) · Polymer Engineering & Science · doi:10.1002/pen.10692 · Cited by 333
Pyun, J., Jia, S., Kowalewski, T., Patterson, G. D., & Matyjaszewski, K. (2003) · Macromolecules · doi:10.1021/ma034188t · Cited by 331
A critical review on cellulose: From fundamental to an approach on sensor technology
Ummartyotin, S., & Manuspiya, H. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.08.050 · Cited by 327
Hasegawa, N., Okamoto, H., Kato, M., & Usuki, A. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20001209)78:11<1918::aid-app100>3.0.co;2-h · Cited by 314
High‐Z Sensitized Plastic Scintillators: A Review
Hajagos, T. J., Liu, C., Cherepy, N. J., & Pei, Q. (2018) · Advanced Materials · doi:10.1002/adma.201706956 · Cited by 305
Organic/inorganic hybrid sensors: A review
Wang, S., Kang, Y., Wang, L., Zhang, H., Wang, Y., & Wang, Y. (2013) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2013.03.042 · Cited by 304
Singh, R. P., Zhang, M., & Chan, D. (2002) · Journal of Materials Science · doi:10.1023/a:1013844015493 · Cited by 302
Entrapment of biocatalysts in hydrophobic sol‐gel materials for use in organic chemistry
Reetz, M. T. (1997) · Advanced Materials · doi:10.1002/adma.19970091203 · Cited by 296
Zheng, L., Farris, R. J., & Coughlin, E. B. (2001) · Macromolecules · doi:10.1021/ma0110094 · Cited by 284
Tien, Y. I., & Wei, K. H. (2001) · Macromolecules · doi:10.1021/ma010551p · Cited by 280
Sol–gel derived organic–inorganic hybrid materials: synthesis, characterizations and applications
Pandey, S., & Mishra, S. B. (2011) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-011-2465-0 · Cited by 277
Walcarius, A., Mandler, D., Cox, J. A., Collinson, M., & Lev, O. (2005) · Journal of Materials Chemistry · doi:10.1039/b504839g · Cited by 275
Hasegawa, N., Okamoto, H., Kato, M., Usuki, A., & Sato, N. (2003) · Polymer · doi:10.1016/s0032-3861(03)00215-5 · Cited by 261
Organic—inorganic hybrid materials
Chujo, Y. (1996) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(96)80105-7 · Cited by 258
Processing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Zhang, C., & Laine, R. M. (2000) · Journal of the American Chemical Society · doi:10.1021/ja000318r · Cited by 256
The Antithrombogenic Potential of a Polyhedral Oligomeric Silsesquioxane (POSS) Nanocomposite
Kannan, R. Y., Salacinski, H. J., De Groot, J., Clatworthy, I., Bozec, L., Horton, M., Butler, P. E., & Seifalian, A. M. (2006) · Biomacromolecules · doi:10.1021/bm050590z · Cited by 200
Hybrid polymer-inorganic nanocomposites
Pomogailo, A. D. (2000) · Russian Chemical Reviews · doi:10.1070/rc2000v069n01abeh000506 · Cited by 199
Preparation and properties of LDHs/epoxy nanocomposites
Hsueh, H.-B., & Chen, C.-Y. (2003) · Polymer · doi:10.1016/s0032-3861(03)00579-2 · Cited by 176
Bioactive sol‐gel glasses: Processing, properties, and applications
Baino, F., Fiume, E., Miola, M., & Verné, E. (2018) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12873 · Cited by 173
Sol–Gel Processing of Metal–Organic Frameworks
Sumida, K., Liang, K., Reboul, J., Ibarra, I. A., Furukawa, S., & Falcaro, P. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03934 · Cited by 172
Gelation Mechanism of Poly(N-isopropylacrylamide)−Clay Nanocomposite Gels
Miyazaki, S., Endo, H., Karino, T., Haraguchi, K., & Shibayama, M. (2007) · Macromolecules · doi:10.1021/ma070104v · Cited by 158
Crystallization behavior of PCL in hybrid confined environment
Jiang, S., Ji, X., An, L., & Jiang, B. (2001) · Polymer · doi:10.1016/s0032-3861(00)00565-6 · Cited by 137
A Review on Rubber-Enhanced Polymeric Materials
Caldona, E. B., De Leon, A. C. C., Pajarito, B. B., & Advincula, R. C. (2017) · Polymer Reviews · doi:10.1080/15583724.2016.1247102 · Cited by 74
Gross, S., Trimmel, G., Schubert, U., & Noto, V. D. (2002) · Polymers for Advanced Technologies · doi:10.1002/pat.183 · Cited by 26
Gong, S.-Q., Epasinghe, D. J., Zhang, W., Zhou, B., Niu, L.-N., Ryou, H., Eid, A. A., Frassetto, A., Yiu, C. K. Y., Arola, D. D., et al. (2014) · Polym. Chem. · doi:10.1039/c3py00635b · Cited by 23
Metadata
- Authors
- Novak, B. M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 1993-06
- Volume
- 5
- Issue
- 6
- Pages
- 422-433
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2065946790
- Cited by
- 1,445
- References
- 24
- FWCI
- 19.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.