The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
Mechanical Reinforcement of Polymers Using Carbon Nanotubes
Abstract
Owing to their unique mechanical properties, carbon nanotubes are considered to be ideal candidates for polymer reinforcement. However, a large amount of work must be done in order to realize their full potential. Effective processing of nanotubes and polymers to fabricate new ultra‐strong composite materials is still a great challenge. This Review explores the progress that has already been made in the area of mechanical reinforcement of polymers using carbon nanotubes. First, the mechanical properties of carbon nanotubes and the system requirements to maximize reinforcement are discussed. Then, main methods described in the literature to produce and process polymer–nanotube composites are considered and analyzed. After that, mechanical properties of various nanotube–polymer composites prepared by different techniques are critically analyzed and compared. Finally, remaining problems, the achievements so far, and the research that needs to be done in the future are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon Nanotubes--the Route Toward Applications
Baughman, R. H., Zakhidov, A. A., & de Heer, W. A. (2002) · Science · doi:10.1126/science.1060928 · Cited by 10,267
Exceptionally high Young's modulus observed for individual carbon nanotubes
Treacy, M. M. J., Ebbesen, T. W., & Gibson, J. M. (1996) · Nature · doi:10.1038/381678a0 · Cited by 5,428
Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load
Yu, M.-F., Lourie, O., Dyer, M. J., Moloni, K., Kelly, T. F., & Ruoff, R. S. (2000) · Science · doi:10.1126/science.287.5453.637 · Cited by 5,310
Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes
Wong, E. W., Sheehan, P. E., & Lieber, C. M. (1997) · Science · doi:10.1126/science.277.5334.1971 · Cited by 4,810
The elasticity and strength of paper and other fibrous materials
Cox, H. L. (1952) · British Journal of Applied Physics · doi:10.1088/0508-3443/3/3/302 · Cited by 3,586
Tensile Loading of Ropes of Single Wall Carbon Nanotubes and their Mechanical Properties
Yu, M.-F., Files, B. S., Arepalli, S., & Ruoff, R. S. (2000) · Physical Review Letters · doi:10.1103/physrevlett.84.5552 · Cited by 2,696
Water-Assisted Highly Efficient Synthesis of Impurity-Free Single-Walled Carbon Nanotubes
Hata, K., Futaba, D. N., Mizuno, K., Namai, T., Yumura, M., & Iijima, S. (2004) · Science · doi:10.1126/science.1104962 · Cited by 2,688
Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum
Kelly, A., & Tyson, W. R. (1965) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(65)90035-9 · Cited by 2,479
Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites
Qian, D., Dickey, E. C., Andrews, R., & Rantell, T. (2000) · Applied Physics Letters · doi:10.1063/1.126500 · Cited by 2,455
Electrostatic Deflections and Electromechanical Resonances of Carbon Nanotubes
Poncharal, P., Wang, Z. L., Ugarte, D., & de Heer, W. A. (1999) · Science · doi:10.1126/science.283.5407.1513 · Cited by 1,934
Cited by
Polymer Nanocomposites Containing Carbon Nanotubes
Moniruzzaman, M., & Winey, K. I. (2006) · Macromolecules · doi:10.1021/ma060733p · Cited by 3,416
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Ma, P.-C., Siddiqui, N. A., Marom, G., & Kim, J.-K. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.003 · Cited by 3,414
Graphene-based polymer nanocomposites
Potts, J. R., Dreyer, D. R., Bielawski, C. W., & Ruoff, R. S. (2011) · Polymer · doi:10.1016/j.polymer.2010.11.042 · Cited by 3,123
Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems
Ferrari, A. C., Bonaccorso, F., Fal'ko, V., Novoselov, K. S., Roche, S., Bøggild, P., Borini, S., Koppens, F. H. L., Palermo, V., Pugno, N., et al. (2015) · Nanoscale · doi:10.1039/c4nr01600a · Cited by 3,027
Self-citationSengupta, R., Bhattacharya, M., Bandyopadhyay, S., & Bhowmick, A. K. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.11.003 · Cited by 1,283
Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials
Thomassin, J.-M., Jérôme, C., Pardoen, T., Bailly, C., Huynen, I., & Detrembleur, C. (2013) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2013.06.001 · Cited by 1,228
A review of vapor grown carbon nanofiber/polymer conductive composites
Al-Saleh, M. H., & Sundararaj, U. (2009) · Carbon · doi:10.1016/j.carbon.2008.09.039 · Cited by 1,087
Liu, N., Luo, F., Wu, H., Liu, Y., Zhang, C., & Chen, J. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200700797 · Cited by 1,070
High-Temperature Dielectric Materials for Electrical Energy Storage
Li, Q., Yao, F.-Z., Liu, Y., Zhang, G., Wang, H., & Wang, Q. (2018) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070317-124435 · Cited by 881
Recent Advances in Research on Carbon Nanotube–Polymer Composites
Byrne, M. T., & Gun'ko, Y. K. (2010) · Advanced Materials · doi:10.1002/adma.200901545 · Cited by 873
Self-citationNanotube–Polymer Composites for Ultrafast Photonics
Hasan, T., Sun, Z., Wang, F., Bonaccorso, F., Tan, P. H., Rozhin, A. G., & Ferrari, A. C. (2009) · Advanced Materials · doi:10.1002/adma.200901122 · Cited by 827
On the use of nanocellulose as reinforcement in polymer matrix composites
Lee, K.-Y., Aitomäki, Y., Berglund, L. A., Oksman, K., & Bismarck, A. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.08.032 · Cited by 819
Domun, N., Hadavinia, H., Zhang, T., Sainsbury, T., Liaghat, G. H., & Vahid, S. (2015) · Nanoscale · doi:10.1039/c5nr01354b · Cited by 808
Saito, T., Hirota, M., Tamura, N., Kimura, S., Fukuzumi, H., Heux, L., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm900414t · Cited by 807
Well-Dispersed Chitosan/Graphene Oxide Nanocomposites
Yang, X., Tu, Y., Li, L., Shang, S., & Tao, X.-M. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100222m · Cited by 755
Polymer Nanocomposites—A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers
Bhattacharya, M. (2016) · Materials · doi:10.3390/ma9040262 · Cited by 747
Recent advances in vegetable oil-based polymers and their composites
Zhang, C., Garrison, T. F., Madbouly, S. A., & Kessler, M. R. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.12.009 · Cited by 669
In situ Polymerization Approach to Graphene-Reinforced Nylon-6 Composites
Xu, Z., & Gao, C. (2010) · Macromolecules · doi:10.1021/ma1009337 · Cited by 667
Chatterjee, S., Nafezarefi, F., Tai, N. H., Schlagenhauf, L., Nüesch, F. A., & Chu, B. T. T. (2012) · Carbon · doi:10.1016/j.carbon.2012.07.021 · Cited by 659
Liquid‐Phase Exfoliation of Nanotubes and Graphene
Coleman, J. N. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901640 · Cited by 654
Self-citationShah, K. A., & Tali, B. A. (2016) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2015.08.013 · Cited by 622
Jalili, R., Razal, J. M., & Wallace, G. G. (2013) · Scientific Reports · doi:10.1038/srep03438 · Cited by 612
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Self‐Healing Hydrogels: The Next Paradigm Shift in Tissue Engineering?
Talebian, S., Mehrali, M., Taebnia, N., Pennisi, C. P., Kadumudi, F. B., Foroughi, J., Hasany, M., Nikkhah, M., Akbari, M., Orive, G., et al. (2019) · Advanced Science · doi:10.1002/advs.201801664 · Cited by 602
Zhao, M., Zhang, Q., Huang, J., & Wei, F. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102222 · Cited by 590
Functionalization of carbon nanotubes using a silane coupling agent
Ma, P. C., Kim, J.-K., & Tang, B. Z. (2006) · Carbon · doi:10.1016/j.carbon.2006.06.032 · Cited by 578
Oxygen Radical Functionalization of Boron Nitride Nanosheets
Sainsbury, T., Satti, A., May, P., Wang, Z., McGovern, I., Gun’ko, Y. K., & Coleman, J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3080665 · Cited by 575
Self-citationFunctional polymer–clay nanotube composites with sustained release of chemical agents
Lvov, Y., & Abdullayev, E. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.009 · Cited by 572
Elastomeric biomaterials for tissue engineering
Chen, Q., Liang, S., & Thouas, G. A. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.05.003 · Cited by 564
Establishment, morphology and properties of carbon nanotube networks in polymer melts
Alig, I., Pötschke, P., Lellinger, D., Skipa, T., Pegel, S., Kasaliwal, G. R., & Villmow, T. (2012) · Polymer · doi:10.1016/j.polymer.2011.10.063 · Cited by 526
Review of the mechanical properties of carbon nanofiber/polymer composites
Al-Saleh, M. H., & Sundararaj, U. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.08.005 · Cited by 496
Developing Polymer Composite Materials: Carbon Nanotubes or Graphene?
Sun, X., Sun, H., Li, H., & Peng, H. (2013) · Advanced Materials · doi:10.1002/adma.201301926 · Cited by 495
Zhi, C., Bando, Y., Tang, C., & Golberg, D. (2010) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2010.06.004 · Cited by 487
Christ, J. F., Aliheidari, N., Ameli, A., & Pötschke, P. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.011 · Cited by 481
Graphene–Polymer Nanofiber Membrane for Ultrafast Photonics
Bao, Q., Zhang, H., Yang, J., Wang, S., Tang, D. Y., Jose, R., Ramakrishna, S., Lim, C. T., & Loh, K. P. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901658 · Cited by 479
Mohd Nurazzi, N., Asyraf, M. R. M., Khalina, A., Abdullah, N., Sabaruddin, F. A., Kamarudin, S. H., Ahmad, S., Mahat, A. M., Lee, C. L., Aisyah, H. A., et al. (2021) · Polymers · doi:10.3390/polym13071047 · Cited by 478
Additive manufacturing (AM) and nanotechnology: promises and challenges
Ivanova, O., Williams, C., & Campbell, T. (2013) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2011-0127 · Cited by 461
The present status and key problems of carbon nanotube based polymer composites
Du, J.-H., Bai, J., & Cheng, H.-M. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.39 · Cited by 441
Challenges of shape memory polymers: A review of the progress toward overcoming SMP's limitations
Rousseau, I. A. (2008) · Polymer Engineering & Science · doi:10.1002/pen.21213 · Cited by 431
Carbon Nanomaterials: Synthesis, Functionalization and Sensing Applications
Speranza, G. (2021) · Nanomaterials · doi:10.3390/nano11040967 · Cited by 418
Chatterjee, S., Wang, J. W., Kuo, W. S., Tai, N. H., Salzmann, C., Li, W. L., Hollertz, R., Nüesch, F. A., & Chu, B. T. T. (2012) · Chemical Physics Letters · doi:10.1016/j.cplett.2012.02.006 · Cited by 378
Recent Advances in Shape Memory Soft Materials for Biomedical Applications
Chan, B. Q. Y., Low, Z. W. K., Heng, S. J. W., Chan, S. Y., Owh, C., & Loh, X. J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b01295 · Cited by 377
Fujigaya, T., & Nakashima, N. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/2/024802 · Cited by 361
He, C., Zhao, N., Shi, C., Du, X., Li, J., Li, H., & Cui, Q. (2007) · Advanced Materials · doi:10.1002/adma.200601381 · Cited by 361
Giordani, S., Bergin, S. D., Nicolosi, V., Lebedkin, S., Kappes, M. M., Blau, W. J., & Coleman, J. N. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0626216 · Cited by 355
Self-citationTowards Solutions of Single‐Walled Carbon Nanotubes in Common Solvents
Bergin, S. D., Nicolosi, V., Streich, P. V., Giordani, S., Sun, Z., Windle, A. H., Ryan, P., Niraj, N. P. P., Wang, Z. T., Carpenter, L., et al. (2008) · Advanced Materials · doi:10.1002/adma.200702451 · Cited by 354
Self-citationAnalysis of the structure and chemical properties of some commercial carbon nanostructures
Tessonnier, J.-P., Rosenthal, D., Hansen, T. W., Hess, C., Schuster, M. E., Blume, R., Girgsdies, F., Pfänder, N., Timpe, O., Su, D. S., et al. (2009) · Carbon · doi:10.1016/j.carbon.2009.02.032 · Cited by 343
2D boron nitride nanosheets for polymer composite materials
Rasul, M. G., Kiziltas, A., Arfaei, B., & Shahbazian-Yassar, R. (2021) · npj 2D Materials and Applications · doi:10.1038/s41699-021-00231-2 · Cited by 332
Macroscopic Carbon Nanotube Assemblies: Preparation, Properties, and Potential Applications
Liu, L., Ma, W., & Zhang, Z. (2011) · Small · doi:10.1002/smll.201002198 · Cited by 323
Bose, S., Khare, R. A., & Moldenaers, P. (2010) · Polymer · doi:10.1016/j.polymer.2010.01.044 · Cited by 322
Magical Allotropes of Carbon: Prospects and Applications
Tiwari, S. K., Kumar, V., Huczko, A., Oraon, R., Adhikari, A. D., & Nayak, G. C. (2016) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408436.2015.1127206 · Cited by 320
A Transforming Metal Nanocomposite with Large Elastic Strain, Low Modulus, and High Strength
Hao, S., Cui, L., Jiang, D., Han, X., Ren, Y., Jiang, J., Liu, Y., Liu, Z., Mao, S., Wang, Y., et al. (2013) · Science · doi:10.1126/science.1228602 · Cited by 319
Salavagione, H. J., Martínez, G., & Gómez, M. A. (2009) · Journal of Materials Chemistry · doi:10.1039/b904232f · Cited by 313
Cationic UV-Curing: Technology and Applications
Sangermano, M., Razza, N., & Crivello, J. V. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300349 · Cited by 306
Clay Assisted Dispersion of Carbon Nanotubes in Conductive Epoxy Nanocomposites
Liu, L., & Grunlan, J. C. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600785 · Cited by 303
Modifications of carbon for polymer composites and nanocomposites
Roy, N., Sengupta, R., & Bhowmick, A. K. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.02.002 · Cited by 301
Koga, H., Saito, T., Kitaoka, T., Nogi, M., Suganuma, K., & Isogai, A. (2013) · Biomacromolecules · doi:10.1021/bm400075f · Cited by 298
Wang, J., Wang, X., Xu, C., Zhang, M., & Shang, X. (2011) · Polymer International · doi:10.1002/pi.3025 · Cited by 296
Wang, Z., Huang, Y., Sun, J., Huang, Y., Hu, H., Jiang, R., Gai, W., Li, G., & Zhi, C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08207 · Cited by 293
A review of the interfacial characteristics of polymer nanocomposites containing carbon nanotubes
Chen, J., Liu, B., Gao, X., & Xu, D. (2018) · RSC Advances · doi:10.1039/c8ra04205e · Cited by 291
Carbon allotropes: beyond graphite and diamond
Falcao, E. H., & Wudl, F. (2007) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1693 · Cited by 286
Continuous Multilayered Carbon Nanotube Yarns
Zhong, X., Li, Y., Liu, Y., Qiao, X., Feng, Y., Liang, J., Jin, J., Zhu, L., Hou, F., & Li, J. (2010) · Advanced Materials · doi:10.1002/adma.200902943 · Cited by 286
Polymer-based composites by electrospinning: Preparation & functionalization with nanocarbons
Lee, J. K. Y., Chen, N., Peng, S., Li, L., Tian, L., Thakor, N., & Ramakrishna, S. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.002 · Cited by 284
Simulation of interphase percolation and gradients in polymer nanocomposites
Qiao, R., & Catherine Brinson, L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.11.022 · Cited by 283
Fang, M., Zhang, Z., Li, J., Zhang, H., Lu, H., & Yang, Y. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01620a · Cited by 275
Kotov, N. A. (2006) · Nature · doi:10.1038/442254a · Cited by 267
Gohardani, O., Elola, M. C., & Elizetxea, C. (2014) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2014.05.002 · Cited by 266
Organic functionalisation of graphenes
Georgakilas, V., Bourlinos, A. B., Zboril, R., Steriotis, T. A., Dallas, P., Stubos, A. K., & Trapalis, C. (2010) · Chemical Communications · doi:10.1039/b922081j · Cited by 262
Electrospun nanofiber: Emerging reinforcing filler in polymer matrix composite materials
Wang, G., Yu, D., Kelkar, A. D., & Zhang, L. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.08.002 · Cited by 254
Stabilization and dispersion of carbon nanomaterials in aqueous solutions: A review
Al-Hamadani, Y. A. J., Chu, K. H., Son, A., Heo, J., Her, N., Jang, M., Park, C. M., & Yoon, Y. (2015) · Separation and Purification Technology · doi:10.1016/j.seppur.2015.11.002 · Cited by 109
Metadata
- Authors
- Coleman, J. N., Khan, U., & Gun'ko, Y. K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2006-02-22
- Volume
- 18
- Issue
- 6
- Pages
- 689-706
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2022568937
- Cited by
- 1,621
- References
- 81
- FWCI
- 59.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.