The DOI matches its Crossref record; 111 of the 111 references it cites were found in a registry or an index.
Stability of Polymer Solar Cells
Open accessAbstract
Organic photovoltaics (OPVs) evolve in an exponential manner in the two key areas of efficiency and stability. The power conversion efficiency (PCE) has in the last decade been increased by almost a factor of ten approaching 10%. A main concern has been the stability that was previously measured in minutes, but can now, in favorable circumstances, exceed many thousands of hours. This astonishing achievement is the subject of this article, which reviews the developments in stability/degradation of OPVs in the last five years. This progress has been gained by several developments, such as inverted device structures of the bulk heterojunction geometry device, which allows for more stable metal electrodes, the choice of more photostable active materials, the introduction of interfacial layers, and roll‐to‐roll fabrication, which promises fast and cheap production methods while creating its own challenges in terms of stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A comprehensive review of ZnO materials and devices
Özgür, Ü., Alivov, Y. I., Liu, C., Teke, A., Reshchikov, M. A., Doğan, S., Avrutin, V., Cho, S.-J., & Morkoç, H. (2005) · Journal of Applied Physics · doi:10.1063/1.1992666 · Cited by 11,463
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Two-layer organic photovoltaic cell
Tang, C. W. (1986) · Applied Physics Letters · doi:10.1063/1.96937 · Cited by 5,002
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Brabec, C. J., Sariciftci, N. S., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200102)11:1<15::aid-adfm15>3.0.co;2-a · Cited by 3,773
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Self-citationPolymer‐Fullerene Bulk‐Heterojunction Solar Cells
Dennler, G., Scharber, M. C., & Brabec, C. J. (2009) · Advanced Materials · doi:10.1002/adma.200801283 · Cited by 3,114
Organic solar cells: An overview
Hoppe, H., & Sariciftci, N. S. (2004) · Journal of Materials Research · doi:10.1557/jmr.2004.0252 · Cited by 2,556
π-Conjugated Polymers for Organic Electronics and Photovoltaic Cell Applications
Facchetti, A. (2011) · Chemistry of Materials · doi:10.1021/cm102419z · Cited by 2,348
Cited by
Next-generation organic photovoltaics based on non-fullerene acceptors
Cheng, P., Li, G., Zhan, X., & Yang, Y. (2018) · Nature Photonics · doi:10.1038/s41566-018-0104-9 · Cited by 1,905
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics
Boyd, C. C., Cheacharoen, R., Leijtens, T., & McGehee, M. D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00336 · Cited by 1,777
Ultrathin and lightweight organic solar cells with high flexibility
Kaltenbrunner, M., White, M. S., Głowacki, E. D., Sekitani, T., Someya, T., Sariciftci, N. S., & Bauer, S. (2012) · Nature Communications · doi:10.1038/ncomms1772 · Cited by 1,757
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Aristidou, N., Eames, C., Sanchez-Molina, I., Bu, X., Kosco, J., Islam, M. S., & Haque, S. A. (2017) · Nature Communications · doi:10.1038/ncomms15218 · Cited by 1,298
Transition Metal Oxides for Organic Electronics: Energetics, Device Physics and Applications
Meyer, J., Hamwi, S., Kröger, M., Kowalsky, W., Riedl, T., & Kahn, A. (2012) · Advanced Materials · doi:10.1002/adma.201201630 · Cited by 1,248
High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor
Holliday, S., Ashraf, R. S., Wadsworth, A., Baran, D., Yousaf, S. A., Nielsen, C. B., Tan, C.-H., Dimitrov, S. D., Shang, Z., Gasparini, N., et al. (2016) · Nature Communications · doi:10.1038/ncomms11585 · Cited by 1,195
Wu, Y., & Zhu, W. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35346f · Cited by 1,188
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Dou, L., You, J., Hong, Z., Xu, Z., Li, G., Street, R. A., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302563 · Cited by 1,151
Efficiency of bulk-heterojunction organic solar cells
Scharber, M. C., & Sariciftci, N. S. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.001 · Cited by 1,088
Stability of organic solar cells: challenges and strategies
Cheng, P., & Zhan, X. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00593k · Cited by 1,046
“Green” electronics: biodegradable and biocompatible materials and devices for sustainable future
Irimia-Vladu, M. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60235d · Cited by 1,044
Kaltenbrunner, M., Adam, G., Głowacki, E. D., Drack, M., Schwödiauer, R., Leonat, L., Apaydin, D. H., Groiss, H., Scharber, M. C., White, M. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4388 · Cited by 1,024
Solar cell efficiency tables (version 50)
Green, M. A., Hishikawa, Y., Warta, W., Dunlop, E. D., Levi, D. H., Hohl‐Ebinger, J., & Ho‐Baillie, A. W. H. (2017) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2909 · Cited by 910
Root, S. E., Savagatrup, S., Printz, A. D., Rodriquez, D., & Lipomi, D. J. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00003 · Cited by 904
25th Anniversary Article: A Soft Future: From Robots and Sensor Skin to Energy Harvesters
Bauer, S., Bauer‐Gogonea, S., Graz, I., Kaltenbrunner, M., Keplinger, C., & Schwödiauer, R. (2014) · Advanced Materials · doi:10.1002/adma.201303349 · Cited by 860
Zhang, Z.-G., Qi, B., Jin, Z., Chi, D., Qi, Z., Li, Y., & Wang, J. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00022f · Cited by 835
Solar cell efficiency tables (Version 55)
Green, M. A., Dunlop, E. D., Hohl‐Ebinger, J., Yoshita, M., Kopidakis, N., & Ho‐Baillie, A. W. Y. (2020) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3228 · Cited by 816
Yao, J., Qiu, B., Zhang, Z.-G., Xue, L., Wang, R., Zhang, C., Chen, S., Zhou, Q., Sun, C., Yang, C., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16509-w · Cited by 781
Solar Cell Efficiency Tables (Version 66)
Green, M. A., Dunlop, E. D., Yoshita, M., Kopidakis, N., Bothe, K., Siefer, G., Hao, X., & Jiang, J. Y. (2025) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3919 · Cited by 766
Solar cell efficiency tables (Version 53)
Green, M. A., Hishikawa, Y., Dunlop, E. D., Levi, D. H., Hohl‐Ebinger, J., Yoshita, M., & Ho‐Baillie, A. W. Y. (2019) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3102 · Cited by 764
Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells
Lee, C., Lee, S., Kim, G.-U., Lee, W., & Kim, B. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00044 · Cited by 741
Solar cell efficiency tables (version 52)
Green, M. A., Hishikawa, Y., Dunlop, E. D., Levi, D. H., Hohl‐Ebinger, J., & Ho‐Baillie, A. W. Y. (2018) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3040 · Cited by 710
Gao, L., Zhang, Z., Xue, L., Min, J., Zhang, J., Wei, Z., & Li, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504629 · Cited by 707
Solar cell efficiency tables (Version 60)
Green, M. A., Dunlop, E. D., Hohl‐Ebinger, J., Yoshita, M., Kopidakis, N., Bothe, K., Hinken, D., Rauer, M., & Hao, X. (2022) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3595 · Cited by 673
Cinar, M. E., & Ozturk, T. (2015) · Chemical Reviews · doi:10.1021/cr500271a · Cited by 670
Organic—inorganic hybrid solar cells: A comparative review
Wright, M., & Uddin, A. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.07.006 · Cited by 654
Solar cell efficiency tables (version 47)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2016) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2728 · Cited by 650
Perovskite-based solar cells: impact of morphology and device architecture on device performance
Salim, T., Sun, S., Abe, Y., Krishna, A., Grimsdale, A. C., & Lam, Y. M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05226a · Cited by 602
Solar cell efficiency tables (Version 63)
Green, M. A., Dunlop, E. D., Yoshita, M., Kopidakis, N., Bothe, K., Siefer, G., & Hao, X. (2024) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3750 · Cited by 588
Bessette, A., & Hanan, G. S. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60411j · Cited by 568
Technology and Market Perspective for Indoor Photovoltaic Cells
Mathews, I., Kantareddy, S. N., Buonassisi, T., & Peters, I. M. (2019) · Joule · doi:10.1016/j.joule.2019.03.026 · Cited by 567
Solar cell efficiency tables (version 44)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2014) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2525 · Cited by 540
Solar cell efficiency tables (version 46)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2637 · Cited by 528
Organic Solar Cells—The Path to Commercial Success
Riede, M., Spoltore, D., & Leo, K. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002653 · Cited by 512
The case for organic photovoltaics
Darling, S. B., & You, F. (2013) · RSC Advances · doi:10.1039/c3ra42989j · Cited by 508
Solar cell efficiency tables (Version 58)
Green, M. A., Dunlop, E. D., Hohl‐Ebinger, J., Yoshita, M., Kopidakis, N., & Hao, X. (2021) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3444 · Cited by 503
The role of the third component in ternary organic solar cells
Gasparini, N., Salleo, A., McCulloch, I., & Baran, D. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0093-4 · Cited by 494
Bulk‐Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization
Kang, H., Kim, G., Kim, J., Kwon, S., Kim, H., & Lee, K. (2016) · Advanced Materials · doi:10.1002/adma.201601197 · Cited by 489
Duan, C., Zhang, K., Zhong, C., Huang, F., & Cao, Y. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60200a · Cited by 487
Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives
Yin, Z., Wei, J., & Zheng, Q. (2016) · Advanced Science · doi:10.1002/advs.201500362 · Cited by 481
Organic Semiconductor Single Crystals for Electronics and Photonics
Zhang, X., Dong, H., & Hu, W. (2018) · Advanced Materials · doi:10.1002/adma.201801048 · Cited by 480
Metal-assisted chemical etching of silicon and nanotechnology applications
Han, H., Huang, Z., & Lee, W. (2014) · Nano Today · doi:10.1016/j.nantod.2014.04.013 · Cited by 460
Advances in hole transport materials engineering for stable and efficient perovskite solar cells
Bakr, Z. H., Wali, Q., Fakharuddin, A., Schmidt-Mende, L., Brown, T. M., & Jose, R. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.025 · Cited by 455
Su, Y.-W., Lan, S.-C., & Wei, K.-H. (2012) · Materials Today · doi:10.1016/s1369-7021(13)70013-0 · Cited by 454
Kang, H., Lee, W., Oh, J., Kim, T., Lee, C., & Kim, B. J. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00347 · Cited by 442
Polymers for electronics and spintronics
Bujak, P., Kulszewicz-Bajer, I., Zagorska, M., Maurel, V., Wielgus, I., & Pron, A. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60257e · Cited by 435
Device stability of perovskite solar cells – A review
Asghar, M. I., Zhang, J., Wang, H., & Lund, P. D. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.003 · Cited by 423
Interface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells
Bai, Y., Meng, X., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701883 · Cited by 418
Recent progress in non-fullerene small molecule acceptors in organic solar cells (OSCs)
Chen, W., & Zhang, Q. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc05066b · Cited by 407
Solar Electricity and Solar Fuels: Status and Perspectives in the Context of the Energy Transition
Armaroli, N., & Balzani, V. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201503580 · Cited by 392
Li, N., Perea, J. D., Kassar, T., Richter, M., Heumueller, T., Matt, G. J., Hou, Y., Güldal, N. S., Chen, H., Chen, S., et al. (2017) · Nature Communications · doi:10.1038/ncomms14541 · Cited by 383
Ultrathin Metal films for Transparent Electrodes of Flexible Optoelectronic Devices
Yun, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606641 · Cited by 350
Interfaces in Perovskite Solar Cells
Fakharuddin, A., Schmidt‐Mende, L., Garcia‐Belmonte, G., Jose, R., & Mora‐Sero, I. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700623 · Cited by 349
Chen, W., Zhang, J., Xu, G., Xue, R., Li, Y., Zhou, Y., Hou, J., & Li, Y. (2018) · Advanced Materials · doi:10.1002/adma.201800855 · Cited by 348
High Performance All‐Polymer Solar Cell via Polymer Side‐Chain Engineering
Zhou, Y., Kurosawa, T., Ma, W., Guo, Y., Fang, L., Vandewal, K., Diao, Y., Wang, C., Yan, Q., Reinspach, J., et al. (2014) · Advanced Materials · doi:10.1002/adma.201306242 · Cited by 338
Chen, H.-C., Chen, Y.-H., Liu, C.-C., Chien, Y.-C., Chou, S.-W., & Chou, P.-T. (2012) · Chemistry of Materials · doi:10.1021/cm302861s · Cited by 337
Po, R., Bernardi, A., Calabrese, A., Carbonera, C., Corso, G., & Pellegrino, A. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43460e · Cited by 336
Wu, Y., Marszalek, M., Zakeeruddin, S. M., Zhang, Q., Tian, H., Grätzel, M., & Zhu, W. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22108j · Cited by 336
Wu, Y., Zhu, W.-H., Zakeeruddin, S. M., & Grätzel, M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02475 · Cited by 321
Yan, J., & Saunders, B. R. (2014) · RSC Adv. · doi:10.1039/c4ra07064j · Cited by 320
ZnO cathode buffer layers for inverted polymer solar cells
Liang, Z., Zhang, Q., Jiang, L., & Cao, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02510a · Cited by 317
Green chemistry for organic solar cells
Burke, D. J., & Lipomi, D. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41096j · Cited by 283
Tremolet de Villers, B. J., O’Hara, K. A., Ostrowski, D. P., Biddle, P. H., Shaheen, S. E., Chabinyc, M. L., Olson, D. C., & Kopidakis, N. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04346 · Cited by 277
Rafique, S., Abdullah, S. M., Sulaiman, K., & Iwamoto, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.12.008 · Cited by 275
Teichler, A., Perelaer, J., & Schubert, U. S. (2013) · Journal of Materials Chemistry C · doi:10.1039/c2tc00255h · Cited by 271
Guo, X., Zhou, N., Lou, S. J., Hennek, J. W., Ponce Ortiz, R., Butler, M. R., Boudreault, P.-L. T., Strzalka, J., Morin, P.-O., Leclerc, M., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3081583 · Cited by 265
Emerging Semitransparent Solar Cells: Materials and Device Design
Tai, Q., & Yan, F. (2017) · Advanced Materials · doi:10.1002/adma.201700192 · Cited by 262
Recent Advances in n‐Type Polymers for All‐Polymer Solar Cells
Genene, Z., Mammo, W., Wang, E., & Andersson, M. R. (2019) · Advanced Materials · doi:10.1002/adma.201807275 · Cited by 256
Savagatrup, S., Printz, A. D., O'Connor, T. F., Zaretski, A. V., Rodriquez, D., Sawyer, E. J., Rajan, K. M., Acosta, R. I., Root, S. E., & Lipomi, D. J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02657h · Cited by 255
Flow-enhanced solution printing of all-polymer solar cells
Diao, Y., Zhou, Y., Kurosawa, T., Shaw, L., Wang, C., Park, S., Guo, Y., Reinspach, J. A., Gu, K., Gu, X., et al. (2015) · Nature Communications · doi:10.1038/ncomms8955 · Cited by 254
Porphyrin‐Based Bulk Heterojunction Organic Photovoltaics: The Rise of the Colors of Life
Kesters, J., Verstappen, P., Kelchtermans, M., Lutsen, L., Vanderzande, D., & Maes, W. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500218 · Cited by 193
Wearable organic solar cells with high cyclic bending stability: Materials selection criteria
O’Connor, T. F., Zaretski, A. V., Savagatrup, S., Printz, A. D., Wilkes, C. D., Diaz, M. I., Sawyer, E. J., & Lipomi, D. J. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.09.049 · Cited by 131
Improved Thermal Stability of Polymer Solar Cells by Incorporating Porphyrins
Wang, S., Qu, Y., Li, S., Ye, F., Chen, Z., & Yang, X. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201403018 · Cited by 48
Wang, L., Qiao, Z., Gao, C., Liu, J., Zhang, Z.-G., Li, X., Li, Y., & Wang, H. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00507 · Cited by 35
Structure of the Crystalline Core of Fiber-like Polythiophene Block Copolymer Micelles
Hayward, D. W., Lunn, D. J., Seddon, A., Finnegan, J. R., Gould, O. E. C., Magdysyuk, O., Manners, I., Whittell, G. R., & Richardson, R. M. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02552 · Cited by 28
Metadata
- Authors
- Jørgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., & Krebs, F. C.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2011-12-29
- Volume
- 24
- Issue
- 5
- Pages
- 580-612
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2073126198
- Cited by
- 1,366
- References
- 111
- FWCI
- 91.58
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.