The DOI matches its Crossref record; 111 of the 111 references it cites were found in a registry or an index.
Stability of Polymer Solar Cells
Open accessAbstract
Organic photovoltaics (OPVs) evolve in an exponential manner in the two key areas of efficiency and stability. The power conversion efficiency (PCE) has in the last decade been increased by almost a factor of ten approaching 10%. A main concern has been the stability that was previously measured in minutes, but can now, in favorable circumstances, exceed many thousands of hours. This astonishing achievement is the subject of this article, which reviews the developments in stability/degradation of OPVs in the last five years. This progress has been gained by several developments, such as inverted device structures of the bulk heterojunction geometry device, which allows for more stable metal electrodes, the choice of more photostable active materials, the introduction of interfacial layers, and roll‐to‐roll fabrication, which promises fast and cheap production methods while creating its own challenges in terms of stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A comprehensive review of ZnO materials and devices
Özgür, Ü., Alivov, Y. I., Liu, C., Teke, A., Reshchikov, M. A., Doğan, S., Avrutin, V., Cho, S.-J., & Morkoç, H. (2005) · Journal of Applied Physics · doi:10.1063/1.1992666 · Cited by 11,463
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Two-layer organic photovoltaic cell
Tang, C. W. (1986) · Applied Physics Letters · doi:10.1063/1.96937 · Cited by 5,002
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Brabec, C. J., Sariciftci, N. S., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200102)11:1<15::aid-adfm15>3.0.co;2-a · Cited by 3,773
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Self-citationPolymer‐Fullerene Bulk‐Heterojunction Solar Cells
Dennler, G., Scharber, M. C., & Brabec, C. J. (2009) · Advanced Materials · doi:10.1002/adma.200801283 · Cited by 3,114
Organic solar cells: An overview
Hoppe, H., & Sariciftci, N. S. (2004) · Journal of Materials Research · doi:10.1557/jmr.2004.0252 · Cited by 2,556
π-Conjugated Polymers for Organic Electronics and Photovoltaic Cell Applications
Facchetti, A. (2011) · Chemistry of Materials · doi:10.1021/cm102419z · Cited by 2,348
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Self-citationConjugated Polymer Photovoltaic Cells
Coakley, K. M., & McGehee, M. D. (2004) · Chemistry of Materials · doi:10.1021/cm049654n · Cited by 2,128
A New Silicon p-n Junction Photocell for Converting Solar Radiation into Electrical Power
Chapin, D. M., Fuller, C. S., & Pearson, G. L. (1954) · Journal of Applied Physics · doi:10.1063/1.1721711 · Cited by 1,696
Kim, J. Y., Kim, S. H., Lee, H. ‐., Lee, K., Ma, W., Gong, X., & Heeger, A. J. (2006) · Advanced Materials · doi:10.1002/adma.200501825 · Cited by 1,656
Nanoscale Morphology of High-Performance Polymer Solar Cells
Yang, X., Loos, J., Veenstra, S. C., Verhees, W. J. H., Wienk, M. M., Kroon, J. M., Michels, M. A. J., & Janssen, R. A. J. (2005) · Nano Letters · doi:10.1021/nl048120i · Cited by 1,543
Morphology of polymer/fullerene bulk heterojunction solar cells
Hoppe, H., & Sariciftci, N. S. (2006) · J. Mater. Chem. · doi:10.1039/b510618b · Cited by 1,414
Low band gap polymers for organic photovoltaics
BUNDGAARD, E., & KREBS, F. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.01.015 · Cited by 1,346
Self-citationCarlson, D., & Wronski, C. R. (1976) · Applied Physics Letters · doi:10.1063/1.88617 · Cited by 1,293
Kippelen, B., & Brédas, J.-L. (2009) · Energy & Environmental Science · doi:10.1039/b812502n · Cited by 1,267
Krebs, F. C., Gevorgyan, S. A., & Alstrup, J. (2009) · Journal of Materials Chemistry · doi:10.1039/b823001c · Cited by 1,229
Self-citationA brief history of the development of organic and polymeric photovoltaics
Spanggaard, H., & Krebs, F. C. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.02.021 · Cited by 1,181
Self-citationUpscaling of polymer solar cell fabrication using full roll-to-roll processing
Krebs, F. C., Tromholt, T., & Jørgensen, M. (2010) · Nanoscale · doi:10.1039/b9nr00430k · Cited by 1,024
Self-citationConsensus stability testing protocols for organic photovoltaic materials and devices
Reese, M. O., Gevorgyan, S. A., Jørgensen, M., Bundgaard, E., Kurtz, S. R., Ginley, D. S., Olson, D. C., Lloyd, M. T., Morvillo, P., Katz, E. A., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.036 · Cited by 989
Self-citationInterface Engineering for Organic Electronics
Ma, H., Yip, H., Huang, F., & Jen, A. K. ‐. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902236 · Cited by 950
Processable Low-Bandgap Polymers for Photovoltaic Applications
Boudreault, P.-L. T., Najari, A., & Leclerc, M. (2011) · Chemistry of Materials · doi:10.1021/cm1021855 · Cited by 827
Polymer–fullerene bulk heterojunction solar cells
Deibel, C., & Dyakonov, V. (2010) · Reports on Progress in Physics · doi:10.1088/0034-4885/73/9/096401 · Cited by 825
Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer
White, M. S., Olson, D. C., Shaheen, S. E., Kopidakis, N., & Ginley, D. S. (2006) · Applied Physics Letters · doi:10.1063/1.2359579 · Cited by 813
Krebs, F. C., Jørgensen, M., Norrman, K., Hagemann, O., Alstrup, J., Nielsen, T. D., Fyenbo, J., Larsen, K., & Kristensen, J. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.001 · Cited by 808
Self-citationEfficient inverted polymer solar cells
Li, G., Chu, C.-W., Shrotriya, V., Huang, J., & Yang, Y. (2006) · Applied Physics Letters · doi:10.1063/1.2212270 · Cited by 788
Advanced materials and processes for polymer solar cell devices
Helgesen, M., Søndergaard, R., & Krebs, F. C. (2010) · J. Mater. Chem. · doi:10.1039/b913168j · Cited by 767
Self-citationOrganic tandem solar cells: A review
Ameri, T., Dennler, G., Lungenschmied, C., & Brabec, C. J. (2009) · Energy & Environmental Science · doi:10.1039/b817952b · Cited by 763
Low bandgap polymers for photon harvesting in bulk heterojunction solar cells
Winder, C., & Sariciftci, N. S. (2004) · Journal of Materials Chemistry · doi:10.1039/b306630d · Cited by 700
Liang, Y., & Yu, L. (2010) · Accounts of Chemical Research · doi:10.1021/ar1000296 · Cited by 697
Recent advances in processing of ZnO
Pearton, S. J., Norton, D. P., Ip, K., Heo, Y. W., & Steiner, T. (2004) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.1714985 · Cited by 673
Polyphenylene-Based Materials for Organic Photovoltaics
Li, C., Liu, M., Pschirer, N. G., Baumgarten, M., & Müllen, K. (2010) · Chemical Reviews · doi:10.1021/cr100052z · Cited by 666
Small Bandgap Polymers for Organic Solar Cells(Polymer Material Development in the Last 5 Years)
Kroon, R., Lenes, M., Hummelen, J. C., Blom, P. W. M., & de Boer, B. (2008) · Polymer Reviews · doi:10.1080/15583720802231833 · Cited by 662
Peet, J., Heeger, A. J., & Bazan, G. C. (2009) · Accounts of Chemical Research · doi:10.1021/ar900065j · Cited by 617
Brabec, C. J., Zerza, G., Cerullo, G., De Silvestri, S., Luzzati, S., Hummelen, J. C., & Sariciftci, S. (2001) · Chemical Physics Letters · doi:10.1016/s0009-2614(01)00431-6 · Cited by 610
Complete microcrystalline p-i-n solar cell—Crystalline or amorphous cell behavior?
Meier, J., Flückiger, R., Keppner, H., & Shah, A. (1994) · Applied Physics Letters · doi:10.1063/1.112183 · Cited by 597
Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: A critical review
Czanderna, A. W., & Pern, F. J. (1996) · Solar Energy Materials and Solar Cells · doi:10.1016/0927-0248(95)00150-6 · Cited by 592
Degradation Patterns in Water and Oxygen of an Inverted Polymer Solar Cell
Norrman, K., Madsen, M. V., Gevorgyan, S. A., & Krebs, F. C. (2010) · Journal of the American Chemical Society · doi:10.1021/ja106299g · Cited by 588
Self-citationInterface investigation and engineering – achieving high performance polymer photovoltaic devices
Chen, L.-M., Xu, Z., Hong, Z., & Yang, Y. (2010) · Journal of Materials Chemistry · doi:10.1039/b925382c · Cited by 565
Polymer:fullerene bulk heterojunction solar cells
Nelson, J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70210-3 · Cited by 499
A Bicontinuous Double Gyroid Hybrid Solar Cell
Crossland, E. J. W., Kamperman, M., Nedelcu, M., Ducati, C., Wiesner, U., Smilgies, D. M., Toombes, G. E. S., Hillmyer, M. A., Ludwigs, S., Steiner, U., et al. (2009) · Nano Letters · doi:10.1021/nl803174p · Cited by 490
Krebs, F. C., Nielsen, T. D., Fyenbo, J., Wadstrøm, M., & Pedersen, M. S. (2010) · Energy & Environmental Science · doi:10.1039/b918441d · Cited by 483
Self-citationHighly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer
Liao, H.-H., Chen, L.-M., Xu, Z., Li, G., & Yang, Y. (2008) · Applied Physics Letters · doi:10.1063/1.2918983 · Cited by 473
Nanoparticle–polymer photovoltaic cells
Saunders, B. R., & Turner, M. L. (2008) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2007.09.001 · Cited by 459
Chamberlain, G. A. (1983) · Solar Cells · doi:10.1016/0379-6787(83)90039-x · Cited by 453
Analysis of the failure mechanism for a stable organic photovoltaic during 10 000 h of testing
Krebs, F. C., & Norrman, K. (2007) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.794 · Cited by 420
Self-citationSivula, K., Ball, Z. T., Watanabe, N., & Fréchet, J. M. J. (2005) · Advanced Materials · doi:10.1002/adma.200501787 · Cited by 410
Solution-Processed Organic Solar Cells
Brabec, C. J., & Durrant, J. R. (2008) · MRS Bulletin · doi:10.1557/mrs2008.138 · Cited by 395
Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime
Hauch, J. A., Schilinsky, P., Choulis, S. A., Childers, R., Biele, M., & Brabec, C. J. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.004 · Cited by 373
Hybrid polymer–metal oxide thin films for photovoltaic applications
Bouclé, J., Ravirajan, P., & Nelson, J. (2007) · Journal of Materials Chemistry · doi:10.1039/b706547g · Cited by 358
Yang, X., van Duren, J. K. J., Janssen, R. A. J., Michels, M. A. J., & Loos, J. (2004) · Macromolecules · doi:10.1021/ma035620+ · Cited by 348
Technological aspects of flexible CIGS solar cells and modules
Kessler, F., & Rudmann, D. (2004) · Solar Energy · doi:10.1016/j.solener.2004.04.010 · Cited by 333
Thermal degradation mechanisms of PEDOT:PSS
VITORATOS, E., SAKKOPOULOS, S., DALAS, E., PALIATSAS, N., KARAGEORGOPOULOS, D., PETRAKI, F., KENNOU, S., & CHOULIS, S. (2009) · Organic Electronics · doi:10.1016/j.orgel.2008.10.008 · Cited by 321
Kempe, M. D., Jorgensen, G. J., Terwilliger, K. M., McMahon, T. J., Kennedy, C. E., & Borek, T. T. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.10.009 · Cited by 312
The risk of power loss in crystalline silicon based photovoltaic modules due to micro-cracks
Köntges, M., Kunze, I., Kajari-Schröder, S., Breitenmoser, X., & Bjørneklett, B. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.10.034 · Cited by 308
Building Integrated Concentrating Photovoltaics: A review
Chemisana, D. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.07.017 · Cited by 305
Conjugated polymer–inorganic semiconductor hybrid solar cells
Xu, T., & Qiao, Q. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00632g · Cited by 284
Water-Induced Degradation of Polymer Solar Cells Studied by H218O Labeling
Norrman, K., Gevorgyan, S. A., & Krebs, F. C. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am800039w · Cited by 281
Self-citationPhotocrosslinkable Polythiophenes for Efficient, Thermally Stable, Organic Photovoltaics
Kim, B. J., Miyamoto, Y., Ma, B., & Fréchet, J. M. J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900043 · Cited by 276
Photoinduced Degradation of Polymer and Polymer–Fullerene Active Layers: Experiment and Theory
Reese, M. O., Nardes, A. M., Rupert, B. L., Larsen, R. E., Olson, D. C., Lloyd, M. T., Shaheen, S. E., Ginley, D. S., Rumbles, G., & Kopidakis, N. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001079 · Cited by 276
Organic Tandem and Multi‐Junction Solar Cells
Hadipour, A., de Boer, B., & Blom, P. W. M. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200700517 · Cited by 263
Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb
Manceau, M., Bundgaard, E., Carlé, J. E., Hagemann, O., Helgesen, M., Søndergaard, R., Jørgensen, M., & Krebs, F. C. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03105d · Cited by 253
Self-citationKrebs, F. C., Alstrup, J., Spanggaard, H., Larsen, K., & Kold, E. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.02.031 · Cited by 249
Self-citationSupramolecular self-assembly and opto-electronic properties of semiconducting block copolymers
de Boer, B., Stalmach, U., van Hutten, P. F., Melzer, C., Krasnikov, V. V., & Hadziioannou, G. (2001) · Polymer · doi:10.1016/s0032-3861(01)00388-3 · Cited by 243
Pesika, N. S., Stebe, K. J., & Searson, P. C. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp0303218 · Cited by 234
Søndergaard, R., Helgesen, M., Jørgensen, M., & Krebs, F. C. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000007 · Cited by 234
Self-citationBeaupré, S., Boudreault, P. T., & Leclerc, M. (2010) · Advanced Materials · doi:10.1002/adma.200903484 · Cited by 228
Reversible and irreversible degradation of organic solar cell performance by oxygen
Seemann, A., Sauermann, T., Lungenschmied, C., Armbruster, O., Bauer, S., Egelhaaf, H.-J., & Hauch, J. (2010) · Solar Energy · doi:10.1016/j.solener.2010.09.007 · Cited by 225
Drees, M., Hoppe, H., Winder, C., Neugebauer, H., Sariciftci, N. S., Schwinger, W., Schäffler, F., Topf, C., Scharber, M. C., Zhu, Z., et al. (2005) · Journal of Materials Chemistry · doi:10.1039/b505361g · Cited by 224
Crandall, R. S. (1991) · Physical Review B · doi:10.1103/physrevb.43.4057 · Cited by 218
A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules
Krebs, F. C., Gevorgyan, S. A., Gholamkhass, B., Holdcroft, S., Schlenker, C., Thompson, M. E., Thompson, B. C., Olson, D., Ginley, D. S., Shaheen, S. E., et al. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.07.015 · Cited by 212
Self-citationInterlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells
Dupont, S. R., Oliver, M. S., Krebs, F. C., & Dauskardt, R. H. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.10.012 · Cited by 209
Self-citationLongterm stability of efficient inverted P3HT:PCBM solar cells
Zimmermann, B., Würfel, U., & Niggemann, M. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.022 · Cited by 208
Moisture transport, adhesion, and corrosion protection of PV module packaging materials
JORGENSEN, G., TERWILLIGER, K., DELCUETO, J., GLICK, S., KEMPE, M., PANKOW, J., PERN, F., & MCMAHON, T. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.04.003 · Cited by 203
Neuteboom, E. E., Meskers, S. C. J., van Hal, P. A., van Duren, J. K. J., Meijer, E. W., Janssen, R. A. J., Dupin, H., Pourtois, G., Cornil, J., Lazzaroni, R., et al. (2003) · Journal of the American Chemical Society · doi:10.1021/ja034926t · Cited by 202
Tandem polymer photovoltaic cells—current status, challenges and future outlook
Sista, S., Hong, Z., Chen, L.-M., & Yang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00754d · Cited by 202
Alstrup, J., Jørgensen, M., Medford, A. J., & Krebs, F. C. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100505e · Cited by 201
Self-citationLilliedal, M. R., Medford, A. J., Madsen, M. V., Norrman, K., & Krebs, F. C. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.06.007 · Cited by 198
Self-citationBlock copolymer strategies for solar cell technology
Topham, P. D., Parnell, A. J., & Hiorns, R. C. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22302 · Cited by 196
The OE-A OPV demonstrator anno domini 2011
Krebs, F. C., Fyenbo, J., Tanenbaum, D. M., Gevorgyan, S. A., Andriessen, R., van Remoortere, B., Galagan, Y., & Jørgensen, M. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01891d · Cited by 189
Self-citationHains, A. W., Liu, J., Martinson, A. B. F., Irwin, M. D., & Marks, T. J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901045 · Cited by 187
Degradation Effects Related to the Hole Transport Layer in Organic Solar Cells
Ecker, B., Nolasco, J. C., Pallarès, J., Marsal, L. F., Posdorfer, J., Parisi, J., & von Hauff, E. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100429 · Cited by 185
Light-induced degradation of the active layer of polymer-based solar cells
Rivaton, A., Chambon, S., Manceau, M., Gardette, J.-L., Lemaître, N., & Guillerez, S. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.021 · Cited by 181
Bu, L., Guo, X., Yu, B., Qu, Y., Xie, Z., Yan, D., Geng, Y., & Wang, F. (2009) · Journal of the American Chemical Society · doi:10.1021/ja905980w · Cited by 179
Dennler, G., Lungenschmied, C., Neugebauer, H., Sariciftci, N. S., & Labouret, A. (2005) · Journal of Materials Research · doi:10.1557/jmr.2005.0399 · Cited by 172
Griffini, G., Douglas, J. D., Piliego, C., Holcombe, T. W., Turri, S., Fréchet, J. M. J., & Mynar, J. L. (2011) · Advanced Materials · doi:10.1002/adma.201004743 · Cited by 164
Electronic memory effects in diodes from a zinc oxide nanoparticle-polystyrene hybrid material
Verbakel, F., Meskers, S. C. J., & Janssen, R. A. J. (2006) · Applied Physics Letters · doi:10.1063/1.2345612 · Cited by 156
Water and oxygen induced degradation of small molecule organic solar cells
Hermenau, M., Riede, M., Leo, K., Gevorgyan, S. A., Krebs, F. C., & Norrman, K. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.001 · Cited by 142
Self-citationHelgesen, M., Gevorgyan, S. A., Krebs, F. C., & Janssen, R. A. J. (2009) · Chemistry of Materials · doi:10.1021/cm901937d · Cited by 139
Self-citationCu(In,Ga)Se2 Solar Cells: Device Stability Based on Chemical Flexibility
Guillemoles, J., Rau, U., Kronik, L., Schock, H., & Cahen, D. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199908)11:11<957::aid-adma957>3.0.co;2-1 · Cited by 130
Bulk Heterojunctions Based on Native Polythiophene
Gevorgyan, S. A., & Krebs, F. C. (2008) · Chemistry of Materials · doi:10.1021/cm800431s · Cited by 117
Self-citationHelgesen, M., Gevorgyan, S. A., & Krebs, F. C. (2008) · Macromolecules · doi:10.1021/ma801932a · Cited by 114
Self-citationUsing Light-Induced Thermocleavage in a Roll-to-Roll Process for Polymer Solar Cells
Krebs, F. C., & Norrman, K. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900858x · Cited by 101
Self-citationAn Arrhenius approach to estimating organic photovoltaic module weathering acceleration factors
Haillant, O., Dumbleton, D., & Zielnik, A. F. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.02.013 · Cited by 100
Tanenbaum, D. M., Dam, H. F., Rösch, R., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.09.064 · Cited by 94
All solution processed tandem polymer solar cells based on thermocleavable materials☆
Hagemann, O., Bjerring, M., Nielsen, N. C., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.05.005 · Cited by 94
Self-citationPerformance analysis of field exposed single crystalline silicon modules
Sastry, O. S., Saurabh, S., Shil, S. K., et al. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.03.035 · Cited by 90
Organic photovoltaics: principles and techniques for nanometre scale characterization
Nicholson, P. G., & de Castro, F. A. (2010) · Nanotechnology · doi:10.1088/0957-4484/21/49/492001 · Cited by 86
A setup for studying stability and degradation of polymer solar cells
Gevorgyan, S. A., Jørgensen, M., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.02.008 · Cited by 86
Self-citationAluminum doped zinc oxide films grown by atomic layer deposition for organic photovoltaic devices
Saarenpää, H., Niemi, T., Tukiainen, A., Lemmetyinen, H. J., & Tkachenko, N. V. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.04.006 · Cited by 84
Degradation of semiconducting polymers by concentrated sunlight
Tromholt, T., Manceau, M., Helgesen, M., Carlé, J. E., & Krebs, F. C. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.09.022 · Cited by 76
Self-citationMetal oxide applications in organic-based photovoltaics
Gershon, T. (2011) · Materials Science and Technology · doi:10.1179/026708311x13081465539809 · Cited by 60
A study of stabilization of P3HT/PCBM organic solar cells by photochemical active TiOx layer
Li, J., Kim, S., Edington, S. C., Nedy, J., Cho, S., Lee, K., Heeger, A. J., Gupta, M. C., & Yates, J. T. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.12.030 · Cited by 57
Analysis of contact degradation at the CdTe-electrode interface in thin film CdTe-CdS solar cells
Singh, V. P., Erickson, O. M., & Chao, J. H. (1995) · Journal of Applied Physics · doi:10.1063/1.359796 · Cited by 54
Influence of the exciton blocking layer on the stability of layered organic solar cells
Lare, Y., Kouskoussa, B., Benchouk, K., Djobo, S. O., Cattin, L., Morsli, M., Dı́az, F. R., Gacitúa, M. A., Abachi, T., del Valle, M. A., et al. (2010) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2010.11.006 · Cited by 40
Moujoud, A., Oh, S. H., Hye, J. J., & Kim, H. J. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.08.019 · Cited by 20
Volume morphology of printable solar cells
Loos, J. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70182-6 · Cited by 18
Xia, Y., Tong, J., Li, B., Wang, C., & Liu, H. (2011) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24735 · Cited by 7
Cited by
Next-generation organic photovoltaics based on non-fullerene acceptors
Cheng, P., Li, G., Zhan, X., & Yang, Y. (2018) · Nature Photonics · doi:10.1038/s41566-018-0104-9 · Cited by 1,905
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics
Boyd, C. C., Cheacharoen, R., Leijtens, T., & McGehee, M. D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00336 · Cited by 1,777
Ultrathin and lightweight organic solar cells with high flexibility
Kaltenbrunner, M., White, M. S., Głowacki, E. D., Sekitani, T., Someya, T., Sariciftci, N. S., & Bauer, S. (2012) · Nature Communications · doi:10.1038/ncomms1772 · Cited by 1,757
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Metadata
- Authors
- Jørgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., & Krebs, F. C.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2011-12-29
- Volume
- 24
- Issue
- 5
- Pages
- 580-612
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2073126198
- Cited by
- 1,366
- References
- 111
- FWCI
- 91.58
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.