The DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index.
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications
Abstract
The additive‐manufacturing (AM) technique, known as three‐dimensional (3D) printing, has attracted much attention in industry and academia in recent years. 3D printing has been developed for a variety of applications. Printable inks are the most important component for 3D printing, and are related to the materials, the printing method, and the structures of the final 3D‐printed products. Carbon materials, due to their good chemical stability and versatile nanostructure, have been widely used in 3D printing for different applications. Good inks are mainly based on volatile solutions having carbon materials as fillers such as graphene oxide (GO), carbon nanotubes (CNT), carbon blacks, and solvent, as well as polymers and other additives. Studies of carbon materials in 3D printing, especially GO‐based materials, have been extensively reported for energy‐related applications. In these circumstances, understanding the very recent developments of 3D‐printed carbon materials and their extended applications to address energy‐related challenges and bring new concepts for material designs are becoming urgent and important. Here, recent developments in 3D printing of emerging devices for energy‐related applications are reviewed, including energy‐storage applications, electronic circuits, and thermal‐energy applications at high temperature. To close, a conclusion and outlook are provided, pointing out future designs and developments of 3D‐printing technology based on carbon materials for energy‐related applications and beyond.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Detection of individual gas molecules adsorbed on graphene
Schedin, F., Geim, A. K., Morozov, S. V., Hill, E. W., Blake, P., Katsnelson, M. I., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1967 · Cited by 8,028
The reduction of graphene oxide
Pei, S., & Cheng, H.-M. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.010 · Cited by 5,164
Lithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
Cited by
Latest advances in supercapacitors: from new electrode materials to novel device designs
Wang, F., Wu, X., Yuan, X., Liu, Z., Zhang, Y., Fu, L., Zhu, Y., Zhou, Q., Wu, Y., & Huang, W. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00205j · Cited by 2,011
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Self-citationA review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
3D Graphene Materials: From Understanding to Design and Synthesis Control
Sun, Z., Fang, S., & Hu, Y. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00083 · Cited by 543
Solar water evaporation by black photothermal sheets
Liu, G., Xu, J., & Wang, K. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.005 · Cited by 542
3D MXene Architectures for Efficient Energy Storage and Conversion
Li, K., Liang, M., Wang, H., Wang, X., Huang, Y., Coelho, J., Pinilla, S., Zhang, Y., Qi, F., Nicolosi, V., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000842 · Cited by 498
Printed supercapacitors: materials, printing and applications
Zhang, Y.-Z., Wang, Y., Cheng, T., Yao, L.-Q., Li, X., Lai, W.-Y., & Huang, W. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00819h · Cited by 497
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
Nguyen, T., & Montemor, M. D. F. (2019) · Advanced Science · doi:10.1002/advs.201801797 · Cited by 399
3D printed functional nanomaterials for electrochemical energy storage
Zhu, C., Liu, T., Qian, F., Chen, W., Chandrasekaran, S., Yao, B., Song, Y., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., et al. (2017) · Nano Today · doi:10.1016/j.nantod.2017.06.007 · Cited by 394
Carbon Materials for Solar Water Evaporation and Desalination
Guan, W., Guo, Y., & Yu, G. (2021) · Small · doi:10.1002/smll.202007176 · Cited by 390
3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage
Wang, Y., Chen, C., Xie, H., Gao, T., Yao, Y., Pastel, G., Han, X., Li, Y., Zhao, J., Fu, K. (., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703140 · Cited by 374
Self-citationRecent progress on solid-state hybrid electrolytes for solid-state lithium batteries
Liang, J., Luo, J., Sun, Q., Yang, X., Li, R., & Sun, X. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.021 · Cited by 365
Guo, W., Yu, C., Li, S., & Qiu, J. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02649b · Cited by 344
Liang, S., Huang, L., Gao, Y., Wang, Q., & Liu, B. (2021) · Advanced Science · doi:10.1002/advs.202102886 · Cited by 342
Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.
Lawson, S., Li, X., Thakkar, H., Rownaghi, A. A., & Rezaei, F. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00060 · Cited by 341
3D printing using plant-derived cellulose and its derivatives: A review
Dai, L., Cheng, T., Duan, C., Zhao, W., Zhang, W., Zou, X., Aspler, J., & Ni, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.027 · Cited by 340
3D Printed High‐Performance Lithium Metal Microbatteries Enabled by Nanocellulose
Cao, D., Xing, Y., Tantratian, K., Wang, X., Ma, Y., Mukhopadhyay, A., Cheng, Z., Zhang, Q., Jiao, Y., Chen, L., et al. (2019) · Advanced Materials · doi:10.1002/adma.201807313 · Cited by 337
Hwang, J., Ejsmont, A., Freund, R., Goscianska, J., Schmidt, B. V. K. J., & Wuttke, S. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00871c · Cited by 333
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
3D printed electrochemical energy storage devices
Chang, P., Mei, H., Zhou, S., Dassios, K. G., & Cheng, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11860d · Cited by 329
3D printing with cellulose materials
Wang, Q., Sun, J., Yao, Q., Ji, C., Liu, J., & Zhu, Q. (2018) · Cellulose · doi:10.1007/s10570-018-1888-y · Cited by 324
Biomass‐Derived Carbon Materials: Controllable Preparation and Versatile Applications
Wang, Y., Zhang, M., Shen, X., Wang, H., Wang, H., Xia, K., Yin, Z., & Zhang, Y. (2021) · Small · doi:10.1002/smll.202008079 · Cited by 324
Design and Manufacture of 3D-Printed Batteries
Lyu, Z., Lim, G. J. H., Koh, J. J., Li, Y., Ma, Y., Ding, J., Wang, J., Hu, Z., Wang, J., Chen, W., et al. (2021) · Joule · doi:10.1016/j.joule.2020.11.010 · Cited by 321
Gong, F. (., Li, H., Wang, W., Huang, J., Xia, D. (., Liao, J., Wu, M., & Papavassiliou, D. V. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.01.044 · Cited by 319
Research status of laser additive manufacturing for metal: a review
Gong, G., Ye, J., Chi, Y., Zhao, Z., Wang, Z., Xia, G., Du, X., Tian, H., Yu, H., & Chen, C. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.08.050 · Cited by 318
Yao, B., Chandrasekaran, S., Zhang, H., Ma, A., Kang, J., Zhang, L., Lu, X., Qian, F., Zhu, C., Duoss, E. B., et al. (2020) · Advanced Materials · doi:10.1002/adma.201906652 · Cited by 305
Additive Manufacturing: Unlocking the Evolution of Energy Materials
Zhakeyev, A., Wang, P., Zhang, L., Shu, W., Wang, H., & Xuan, J. (2017) · Advanced Science · doi:10.1002/advs.201700187 · Cited by 291
Generalized 3D Printing of Graphene-Based Mixed-Dimensional Hybrid Aerogels
Tang, X., Zhou, H., Cai, Z., Cheng, D., He, P., Xie, P., Zhang, D., & Fan, T. (2018) · ACS Nano · doi:10.1021/acsnano.8b00304 · Cited by 290
High-Mass-Loading Electrodes for Advanced Secondary Batteries and Supercapacitors
Wu, F., Liu, M., Li, Y., Feng, X., Zhang, K., Bai, Y., Wang, X., & Wu, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00093-0 · Cited by 288
Progress in 3D-MXene Electrodes for Lithium/Sodium/Potassium/Magnesium/Zinc/Aluminum-Ion Batteries
Bashir, T., Zhou, S., Yang, S., Ismail, S. A., Ali, T., Wang, H., Zhao, J., & Gao, L. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-022-00174-2 · Cited by 284
3D printing for membrane separation, desalination and water treatment
Tijing, L. D., Dizon, J. R. C., Ibrahim, I., Nisay, A. R. N., Shon, H. K., & Advincula, R. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100486 · Cited by 269
Zhang, T., & Ran, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010041 · Cited by 260
Carbon‐Based Metal‐Free Catalysts for Energy Storage and Environmental Remediation
Hu, C., Lin, Y., Connell, J. W., Cheng, H., Gogotsi, Y., Titirici, M., & Dai, L. (2019) · Advanced Materials · doi:10.1002/adma.201806128 · Cited by 258
3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries
Shen, K., Mei, H., Li, B., Ding, J., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701527 · Cited by 256
Zhang, C., Li, Y., Kang, W., Liu, X., & Wang, Q. (2021) · SusMat · doi:10.1002/sus2.11 · Cited by 256
Metadata
- Authors
- Fu, K., Yao, Y., Dai, J., & Hu, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2016-12-16
- Volume
- 29
- Issue
- 9
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2562325507
- Cited by
- 475
- References
- 78
- FWCI
- 36.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.