The DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index.
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications
Abstract
The additive‐manufacturing (AM) technique, known as three‐dimensional (3D) printing, has attracted much attention in industry and academia in recent years. 3D printing has been developed for a variety of applications. Printable inks are the most important component for 3D printing, and are related to the materials, the printing method, and the structures of the final 3D‐printed products. Carbon materials, due to their good chemical stability and versatile nanostructure, have been widely used in 3D printing for different applications. Good inks are mainly based on volatile solutions having carbon materials as fillers such as graphene oxide (GO), carbon nanotubes (CNT), carbon blacks, and solvent, as well as polymers and other additives. Studies of carbon materials in 3D printing, especially GO‐based materials, have been extensively reported for energy‐related applications. In these circumstances, understanding the very recent developments of 3D‐printed carbon materials and their extended applications to address energy‐related challenges and bring new concepts for material designs are becoming urgent and important. Here, recent developments in 3D printing of emerging devices for energy‐related applications are reviewed, including energy‐storage applications, electronic circuits, and thermal‐energy applications at high temperature. To close, a conclusion and outlook are provided, pointing out future designs and developments of 3D‐printing technology based on carbon materials for energy‐related applications and beyond.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Detection of individual gas molecules adsorbed on graphene
Schedin, F., Geim, A. K., Morozov, S. V., Hill, E. W., Blake, P., Katsnelson, M. I., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1967 · Cited by 8,028
The reduction of graphene oxide
Pei, S., & Cheng, H.-M. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.010 · Cited by 5,164
Lithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
Transparent, Conductive Graphene Electrodes for Dye-Sensitized Solar Cells
Wang, X., Zhi, L., & Müllen, K. (2008) · Nano Letters · doi:10.1021/nl072838r · Cited by 4,467
Eda, G., Fanchini, G., & Chhowalla, M. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.83 · Cited by 4,379
A review of electrolyte materials and compositions for electrochemical supercapacitors
Zhong, C., Deng, Y., Hu, W., Qiao, J., Zhang, L., & Zhang, J. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00303b · Cited by 3,687
Functionalized graphene sheets for polymer nanocomposites
Ramanathan, T., Abdala, A. A., Stankovich, S., Dikin, D. A., Herrera-Alonso, M., Piner, R. D., Adamson, D. H., Schniepp, H. C., Chen, X., Ruoff, R. S., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.96 · Cited by 3,470
Graphene Based Electrochemical Sensors and Biosensors: A Review
Shao, Y., Wang, J., Wu, H., Liu, J., Aksay, I. A., & Lin, Y. (2010) · Electroanalysis · doi:10.1002/elan.200900571 · Cited by 3,124
Yoo, E., Kim, J., Hosono, E., Zhou, H.-S., Kudo, T., & Honma, I. (2008) · Nano Letters · doi:10.1021/nl800957b · Cited by 2,921
Epitaxial graphene on ruthenium
Sutter, P. W., Flege, J.-I., & Sutter, E. A. (2008) · Nature Materials · doi:10.1038/nmat2166 · Cited by 2,346
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Efficient storage mechanisms for building better supercapacitors
Salanne, M., Rotenberg, B., Naoi, K., Kaneko, K., Taberna, P.-L., Grey, C. P., Dunn, B., & Simon, P. (2016) · Nature Energy · doi:10.1038/nenergy.2016.70 · Cited by 2,181
El-Kady, M. F., & Kaner, R. B. (2013) · Nature Communications · doi:10.1038/ncomms2446 · Cited by 1,868
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
Three-Dimensional Battery Architectures
Long, J. W., Dunn, B., Rolison, D. R., & White, H. S. (2004) · Chemical Reviews · doi:10.1021/cr020740l · Cited by 1,194
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes
Zhang, H., Yu, X., & Braun, P. V. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.38 · Cited by 1,072
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Three‐Dimensional Battery Architectures
Long, J. W., Dunn, B., Rolison, D. R., & White, H. S. (2004) · ChemInform · doi:10.1002/chin.200451264 · Cited by 999
Fabrication and Properties of Carbon Fibers
Huang, X. (2009) · Materials · doi:10.3390/ma2042369 · Cited by 969
Graphene-based materials for catalysis
Machado, B. F., & Serp, P. (2012) · Catal. Sci. Technol. · doi:10.1039/c1cy00361e · Cited by 958
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Beidaghi, M., & Wang, C. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201292 · Cited by 812
Multifunctional 3D nanoarchitectures for energy storage and conversion
Rolison, D. R., Long, J. W., Lytle, J. C., Fischer, A. E., Rhodes, C. P., McEvoy, T. M., Bourg, M. E., & Lubers, A. M. (2009) · Chem. Soc. Rev. · doi:10.1039/b801151f · Cited by 812
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Self-citationSupercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
Graphene-based Composite Thin Films for Electronics
Eda, G., & Chhowalla, M. (2009) · Nano Letters · doi:10.1021/nl8035367 · Cited by 684
Graphene Oxide: Surface Activity and Two‐Dimensional Assembly
Kim, F., Cote, L. J., & Huang, J. (2010) · Advanced Materials · doi:10.1002/adma.200903932 · Cited by 674
Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries
Billaud, J., Bouville, F., Magrini, T., Villevieille, C., & Studart, A. R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.97 · Cited by 671
Pikul, J. H., Gang Zhang, H., Cho, J., Braun, P. V., & King, W. P. (2013) · Nature Communications · doi:10.1038/ncomms2747 · Cited by 635
Fabrication of Graphene–Polymer Nanocomposites With Higher‐Order Three‐Dimensional Architectures
Vickery, J. L., Patil, A. J., & Mann, S. (2009) · Advanced Materials · doi:10.1002/adma.200803606 · Cited by 606
High-strength cellular ceramic composites with 3D microarchitecture
Bauer, J., Hengsbach, S., Tesari, I., Schwaiger, R., & Kraft, O. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1315147111 · Cited by 563
3D Printing of Graphene Aerogels
Zhang, Q., Zhang, F., Medarametla, S. P., Li, H., Zhou, C., & Lin, D. (2016) · Small · doi:10.1002/smll.201503524 · Cited by 532
Configurable 3D-Printed millifluidic and microfluidic ‘lab on a chip’ reactionware devices
Kitson, P. J., Rosnes, M. H., Sans, V., Dragone, V., & Cronin, L. (2012) · Lab on a Chip · doi:10.1039/c2lc40761b · Cited by 484
3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T.-W., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 432
Interlayer-Expanded Molybdenum Disulfide Nanocomposites for Electrochemical Magnesium Storage
Liang, Y., Yoo, H. D., Li, Y., Shuai, J., Calderon, H. A., Robles Hernandez, F. C., Grabow, L. C., & Yao, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00388 · Cited by 426
Self-citationSelf‐Assembly of Graphene Oxide at Interfaces
Shao, J., Lv, W., & Yang, Q. (2014) · Advanced Materials · doi:10.1002/adma.201400267 · Cited by 426
Xu, J., Tan, Z., Zeng, W., Chen, G., Wu, S., Zhao, Y., Ni, K., Tao, Z., Ikram, M., Ji, H., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600586 · Cited by 421
High-performance battery electrodes via magnetic templating
Sander, J. S., Erb, R. M., Li, L., Gurijala, A., & Chiang, Y.-M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.99 · Cited by 409
Ultra-thick graphene bulk supercapacitor electrodes for compact energy storage
Li, H., Tao, Y., Zheng, X., Luo, J., Kang, F., Cheng, H.-M., & Yang, Q.-H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00941g · Cited by 407
Graphene oxide dispersions: tuning rheology to enable fabrication
Naficy, S., Jalili, R., Aboutalebi, S. H., Gorkin III, R. A., Konstantinov, K., Innis, P. C., Spinks, G. M., Poulin, P., & Wallace, G. G. (2014) · Mater. Horiz. · doi:10.1039/c3mh00144j · Cited by 368
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340
Fabrication of highly conductive graphene flexible circuits by 3D printing
Zhang, D., Chi, B., Li, B., Gao, Z., Du, Y., Guo, J., & Wei, J. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.03.014 · Cited by 336
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Secor, E. B., Ahn, B. Y., Gao, T. Z., Lewis, J. A., & Hersam, M. C. (2015) · Advanced Materials · doi:10.1002/adma.201502866 · Cited by 334
Printing in Three Dimensions with Graphene
García‐Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitian, F., & Saiz, E. (2015) · Advanced Materials · doi:10.1002/adma.201405046 · Cited by 303
Thermal infrared emission from biased graphene
Freitag, M., Chiu, H.-Y., Steiner, M., Perebeinos, V., & Avouris, P. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.90 · Cited by 291
3D printed microfluidic devices with integrated versatile and reusable electrodes
Erkal, J. L., Selimovic, A., Gross, B. C., Lockwood, S. Y., Walton, E. L., McNamara, S., Martin, R. S., & Spence, D. M. (2014) · Lab Chip · doi:10.1039/c4lc00171k · Cited by 287
Mesoscale assembly of chemically modified graphene into complex cellular networks
Barg, S., Perez, F. M., Ni, N., do Vale Pereira, P., Maher, R. C., Garcia-Tuñon, E., Eslava, S., Agnoli, S., Mattevi, C., & Saiz, E. (2014) · Nature Communications · doi:10.1038/ncomms5328 · Cited by 285
3D Printing of Reduced Graphene Oxide Nanowires
Kim, J. H., Chang, W. S., Kim, D., Yang, J. R., Han, J. T., Lee, G., Kim, J. T., & Seol, S. K. (2015) · Advanced Materials · doi:10.1002/adma.201404380 · Cited by 258
Savvatimskiy, A. I. (2005) · Carbon · doi:10.1016/j.carbon.2004.12.027 · Cited by 249
Ultra-fast self-assembly and stabilization of reactive nanoparticles in reduced graphene oxide films
Chen, Y., Egan, G. C., Wan, J., Zhu, S., Jacob, R. J., Zhou, W., Dai, J., Wang, Y., Danner, V. A., Yao, Y., et al. (2016) · Nature Communications · doi:10.1038/ncomms12332 · Cited by 231
Self-citationHu, J., Jiang, Y., Cui, S., Duan, Y., Liu, T., Guo, H., Lin, L., Lin, Y., Zheng, J., Amine, K., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600856 · Cited by 214
Three dimensional (3D) printed electrodes for interdigitated supercapacitors
Zhao, C., Wang, C., Gorkin, R., Beirne, S., Shu, K., & Wallace, G. G. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.01.013 · Cited by 213
Self-Assembled 3D Graphene Monolith from Solution
Lv, W., Zhang, C., Li, Z., & Yang, Q.-H. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502655m · Cited by 176
3D-printed supercapacitor-powered electrochemiluminescent protein immunoarray
Kadimisetty, K., Mosa, I. M., Malla, S., Satterwhite-Warden, J. E., Kuhns, T. M., Faria, R. C., Lee, N. H., & Rusling, J. F. (2016) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.09.017 · Cited by 172
Emerging Carbon and Post-Carbon Nanomaterial Inks for Printed Electronics
Secor, E. B., & Hersam, M. C. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502431r · Cited by 142
Hadjizadeh, A., & Doillon, C. J. (2010) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.269 · Cited by 116
Carbon nanotube filaments in household light bulbs
Wei, J., Zhu, H., Wu, D., & Wei, B. (2004) · Applied Physics Letters · doi:10.1063/1.1762697 · Cited by 109
Flexible, High Temperature, Planar Lighting with Large Scale Printable Nanocarbon Paper
Bao, W., Pickel, A. D., Zhang, Q., Chen, Y., Yao, Y., Wan, J., Fu, K. K., Wang, Y., Dai, J., Zhu, H., et al. (2016) · Advanced Materials · doi:10.1002/adma.201506116 · Cited by 76
Self-citationSynchrotron radiation and quantum gravity
Ellis, J. R., Mavromatos, N. E., Nanopoulos, D. V., & Sakharov, A. (2004) · Nature · doi:10.1038/nature02481 · Cited by 68
High Volumetric Capacity Three-Dimensionally Sphere-Caged Secondary Battery Anodes
Liu, J., Chen, X., Kim, J., Zheng, Q., Ning, H., Sun, P., Huang, X., Liu, J., Niu, J., & Braun, P. V. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01711 · Cited by 65
Kumagai, S., Ishikawa, T., & Sawa, N. (2015) · Journal of Energy Storage · doi:10.1016/j.est.2015.05.005 · Cited by 64
Zhu, F., Lin, X., Liu, P., Jiang, K., Wei, Y., Wu, Y., Wang, J., & Fan, S. (2014) · Nano Research · doi:10.1007/s12274-014-0423-1 · Cited by 62
Cited by
Latest advances in supercapacitors: from new electrode materials to novel device designs
Wang, F., Wu, X., Yuan, X., Liu, Z., Zhang, Y., Fu, L., Zhu, Y., Zhou, Q., Wu, Y., & Huang, W. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00205j · Cited by 2,011
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Self-citationA review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Metadata
- Authors
- Fu, K., Yao, Y., Dai, J., & Hu, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2016-12-16
- Volume
- 29
- Issue
- 9
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2562325507
- Cited by
- 475
- References
- 78
- FWCI
- 36.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.