The DOI matches its Crossref record; 130 of the 130 references it cites were found in a registry or an index.
Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating Below 500 °C
Abstract
Solid‐oxide fuel cells (SOFCs) are electricity generators that can convert the chemical energy in various fuels directly to the electric power with high efficiency. Recent advances in materials and related key components for SOFCs operating at ≈500 °C are summarized here, with a focus on the materials, structures, and techniques development for low‐temperature SOFCs, including the analysis of most of the critical parameters affecting the electrochemical performance of the electrolyte, anode, and cathode. New strategies, such as thin‐film deposition, exsolution of nanoparticles from perovskites, microwave plasma heating, and finger‐like channeled electrodes, are discussed. These recent developments highlight the need for electrodes with higher activity and electrolytes with greater conductivity to generate a high electrochemical performance at lower temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Self-Consistent Equations Including Exchange and Correlation Effects
Kohn, W., & Sham, L. J. (1965) · Physical Review · doi:10.1103/physrev.140.a1133 · Cited by 64,135
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
Minh, N. Q. (1993) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1993.tb03645.x · Cited by 3,839
A high-performance cathode for the next generation of solid-oxide fuel cells
Shao, Z., & Haile, S. M. (2004) · Nature · doi:10.1038/nature02863 · Cited by 3,158
Self-citationIron-Based Catalysts with Improved Oxygen Reduction Activity in Polymer Electrolyte Fuel Cells
Lefèvre, M., Proietti, E., Jaouen, F., & Dodelet, J.-P. (2009) · Science · doi:10.1126/science.1170051 · Cited by 3,139
Lowering the Temperature of Solid Oxide Fuel Cells
Wachsman, E. D., & Lee, K. T. (2011) · Science · doi:10.1126/science.1204090 · Cited by 2,554
Proton Conductivity: Materials and Applications
Kreuer, K.-D. (1996) · Chemistry of Materials · doi:10.1021/cm950192a · Cited by 2,529
Kreuer, K. D. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022802.091825 · Cited by 2,395
Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°C
Steele, B. C. H. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(99)00319-7 · Cited by 2,078
Cited by
Metal oxide-based materials as an emerging family of hydrogen evolution electrocatalysts
Zhu, Y., Lin, Q., Zhong, Y., Tahini, H. A., Shao, Z., & Wang, H. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02485f · Cited by 709
Self-citationThermal-expansion offset for high-performance fuel cell cathodes
Zhang, Y., Chen, B., Guan, D., Xu, M., Ran, R., Ni, M., Zhou, W., O’Hayre, R., & Shao, Z. (2021) · Nature · doi:10.1038/s41586-021-03264-1 · Cited by 691
Self-citationFan, L., Zhu, B., Su, P.-C., & He, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.044 · Cited by 501
Xu, X., Wang, W., Zhou, W., & Shao, Z. (2018) · Small Methods · doi:10.1002/smtd.201800071 · Cited by 407
Self-citationMetal–Organic Frameworks as a Versatile Platform for Proton Conductors
Ye, Y., Gong, L., Xiang, S., Zhang, Z., & Chen, B. (2020) · Advanced Materials · doi:10.1002/adma.201907090 · Cited by 392
A comprehensive review of solid oxide fuel cells operating on various promising alternative fuels
Xu, Q., Guo, Z., Xia, L., He, Q., Li, Z., Temitope Bello, I., Zheng, K., & Ni, M. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.115175 · Cited by 382
Triple ionic–electronic conducting oxides for next-generation electrochemical devices
Papac, M., Stevanović, V., Zakutayev, A., & O’Hayre, R. (2021) · Nature Materials · doi:10.1038/s41563-020-00854-8 · Cited by 349
Ruddlesden–Popper perovskites in electrocatalysis
Xu, X., Pan, Y., Zhong, Y., Ran, R., & Shao, Z. (2020) · Materials Horizons · doi:10.1039/d0mh00477d · Cited by 330
Self-citationHeterointerface engineering for enhancing the electrochemical performance of solid oxide cells
Zhao, C., Li, Y., Zhang, W., Zheng, Y., Lou, X., Yu, B., Chen, J., Chen, Y., Liu, M., & Wang, J. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02230a · Cited by 319
A-site perovskite oxides: an emerging functional material for electrocatalysis and photocatalysis
Li, X., Zhao, H., Liang, J., Luo, Y., Chen, G., Shi, X., Lu, S., Gao, S., Hu, J., Liu, Q., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09756j · Cited by 307
Rational design of perovskite ferrites as high-performance proton-conducting fuel cell cathodes
Wang, Z., Wang, Y., Wang, J., Song, Y., Robson, M. J., Seong, A., Yang, M., Zhang, Z., Belotti, A., Liu, J., et al. (2022) · Nature Catalysis · doi:10.1038/s41929-022-00829-9 · Cited by 271
Self-citationLowering the operating temperature of protonic ceramic electrochemical cells to <450 °C
Liu, F., Deng, H., Diercks, D., Kumar, P., Jabbar, M. H. A., Gumeci, C., Furuya, Y., Dale, N., Oku, T., Usuda, M., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01350-4 · Cited by 262
Review: recent progress in low-temperature proton-conducting ceramics
Meng, Y., Gao, J., Zhao, Z., Amoroso, J., Tong, J., & Brinkman, K. S. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03559-9 · Cited by 255
Dong, Z., Li, B., & Zhu, Y. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c00837 · Cited by 66
Metadata
- Authors
- Zhang, Y., Knibbe, R., Sunarso, J., Zhong, Y., Zhou, W., Shao, Z., & Zhu, Z.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-06-19
- Volume
- 29
- Issue
- 48
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2626072696
- Cited by
- 390
- References
- 130
- FWCI
- 15.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.