The DOI matches its Crossref record; 130 of the 130 references it cites were found in a registry or an index.
Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating Below 500 °C
Abstract
Solid‐oxide fuel cells (SOFCs) are electricity generators that can convert the chemical energy in various fuels directly to the electric power with high efficiency. Recent advances in materials and related key components for SOFCs operating at ≈500 °C are summarized here, with a focus on the materials, structures, and techniques development for low‐temperature SOFCs, including the analysis of most of the critical parameters affecting the electrochemical performance of the electrolyte, anode, and cathode. New strategies, such as thin‐film deposition, exsolution of nanoparticles from perovskites, microwave plasma heating, and finger‐like channeled electrodes, are discussed. These recent developments highlight the need for electrodes with higher activity and electrolytes with greater conductivity to generate a high electrochemical performance at lower temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Self-Consistent Equations Including Exchange and Correlation Effects
Kohn, W., & Sham, L. J. (1965) · Physical Review · doi:10.1103/physrev.140.a1133 · Cited by 64,135
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
Minh, N. Q. (1993) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1993.tb03645.x · Cited by 3,839
A high-performance cathode for the next generation of solid-oxide fuel cells
Shao, Z., & Haile, S. M. (2004) · Nature · doi:10.1038/nature02863 · Cited by 3,158
Self-citationIron-Based Catalysts with Improved Oxygen Reduction Activity in Polymer Electrolyte Fuel Cells
Lefèvre, M., Proietti, E., Jaouen, F., & Dodelet, J.-P. (2009) · Science · doi:10.1126/science.1170051 · Cited by 3,139
Lowering the Temperature of Solid Oxide Fuel Cells
Wachsman, E. D., & Lee, K. T. (2011) · Science · doi:10.1126/science.1204090 · Cited by 2,554
Proton Conductivity: Materials and Applications
Kreuer, K.-D. (1996) · Chemistry of Materials · doi:10.1021/cm950192a · Cited by 2,529
Kreuer, K. D. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022802.091825 · Cited by 2,395
Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°C
Steele, B. C. H. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(99)00319-7 · Cited by 2,078
Direct oxidation of hydrocarbons in a solid-oxide fuel cell
Park, S., Vohs, J. M., & Gorte, R. J. (2000) · Nature · doi:10.1038/35005040 · Cited by 1,894
Mesopelagic fish biomass and trophic efficiency of the open ocean
Irigoien, X., Klevjer, J., Røstad, A., Martínez, U., Boyra, G., Acuña, J. L., Bode, A., Echevarrı́a, F., González-Gordillo, J. L., Hernández‐León, S., et al. (2014) · DIGITAL.CSIC (Spanish National Research Council (CSIC)) · Cited by 1,813
Doped LaGaO3 Perovskite Type Oxide as a New Oxide Ionic Conductor
Ishihara, T., Matsuda, H., & Takita, Y. (1994) · Journal of the American Chemical Society · doi:10.1021/ja00088a016 · Cited by 1,707
Density functional theory for transition metals and transition metal chemistry
Cramer, C. J., & Truhlar, D. G. (2009) · Physical Chemistry Chemical Physics · doi:10.1039/b907148b · Cited by 1,648
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Readily processed protonic ceramic fuel cells with high performance at low temperatures
Duan, C., Tong, J., Shang, M., et al. (2015) · Science · doi:10.1126/science.aab3987 · Cited by 1,511
IWAHARA, H., ESAKA, T., UCHIDA, H., & MAEDA, N. (1981) · Solid State Ionics · doi:10.1016/0167-2738(81)90113-2 · Cited by 1,485
Ganduglia-Pirovano, M. V., Hofmann, A., & Sauer, J. (2007) · Surface Science Reports · doi:10.1016/j.surfrep.2007.03.002 · Cited by 1,284
A redox-stable efficient anode for solid-oxide fuel cells
Tao, S., & Irvine, J. T. S. (2003) · Nature Materials · doi:10.1038/nmat871 · Cited by 1,249
Yang, L., Wang, S., Blinn, K., Liu, M., Liu, Z., Cheng, Z., & Liu, M. (2009) · Science · doi:10.1126/science.1174811 · Cited by 1,225
Double Perovskites as Anode Materials for Solid-Oxide Fuel Cells
Huang, Y.-H., Dass, R. I., Xing, Z.-L., & Goodenough, J. B. (2006) · Science · doi:10.1126/science.1125877 · Cited by 1,070
Cargnello, M., Jaén, J. J. D., Garrido, J. C. H., Bakhmutsky, K., Montini, T., Gámez, J. J. C., Gorte, R. J., & Fornasiero, P. (2012) · Science · doi:10.1126/science.1222887 · Cited by 1,023
Materials challenges toward proton-conducting oxide fuel cells: a critical review
Fabbri, E., Pergolesi, D., & Traversa, E. (2010) · Chemical Society Reviews · doi:10.1039/b902343g · Cited by 937
A redox-stable efficient anode for solid-oxide fuel cells
Tao, S., & Irvine, J. T. S. (2010) · Co-Published with Macmillan Publishers Ltd, UK eBooks · doi:10.1142/9789814317665_0037 · Cited by 917
Malavasi, L., Fisher, C. A. J., & Islam, M. S. (2010) · Chemical Society Reviews · doi:10.1039/b915141a · Cited by 895
Enhancing SOFC cathode performance by surface modification through infiltration
Ding, D., Li, X., Lai, S. Y., Gerdes, K., & Liu, M. (2014) · Energy & Environmental Science · doi:10.1039/c3ee42926a · Cited by 882
Solid-state protonic conductors: principles, properties, progress and prospects
Norby, T. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00152-6 · Cited by 863
Fabrication and structural performance of periodic cellular metal sandwich structures
Wadley, H. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00266-5 · Cited by 800
Sengodan, S., Choi, S., Jun, A., Shin, T. H., Ju, Y.-W., Jeong, H. Y., Shin, J., Irvine, J. T. S., & Kim, G. (2015) · Nature Materials · doi:10.1038/nmat4166 · Cited by 746
Prediction of solid oxide fuel cell cathode activity with first-principles descriptors
Lee, Y.-L., Kleis, J., Rossmeisl, J., Shao-Horn, Y., & Morgan, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02032c · Cited by 659
Stevanović, V., Lany, S., Zhang, X., & Zunger, A. (2012) · Physical Review B · doi:10.1103/physrevb.85.115104 · Cited by 650
A thermally self-sustained micro solid-oxide fuel-cell stack with high power density
Shao, Z., Haile, S. M., Ahn, J., Ronney, P. D., Zhan, Z., & Barnett, S. A. (2005) · Nature · doi:10.1038/nature03673 · Cited by 626
Self-citationHybrid functional studies of the oxygen vacancy inTiO2
Janotti, A., Varley, J. B., Rinke, P., Umezawa, N., Kresse, G., & Van de Walle, C. G. (2010) · Physical Review B · doi:10.1103/physrevb.81.085212 · Cited by 624
Switching on electrocatalytic activity in solid oxide cells
Myung, J.-H., Neagu, D., Miller, D. N., & Irvine, J. T. S. (2016) · Nature · doi:10.1038/nature19090 · Cited by 590
Pergolesi, D., Fabbri, E., D’Epifanio, A., Di Bartolomeo, E., Tebano, A., Sanna, S., Licoccia, S., Balestrino, G., & Traversa, E. (2010) · Nature Materials · doi:10.1038/nmat2837 · Cited by 576
Strongly correlated perovskite fuel cells
Zhou, Y., Guan, X., Zhou, H., Ramadoss, K., Adam, S., Liu, H., Lee, S., Shi, J., Tsuchiya, M., Fong, D. D., et al. (2016) · Nature · doi:10.1038/nature17653 · Cited by 556
Fabbri, E., Bi, L., Pergolesi, D., & Traversa, E. (2011) · Advanced Materials · doi:10.1002/adma.201103102 · Cited by 550
Jiang, S. P. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.09.067 · Cited by 549
Proton conduction in rare-earth ortho-niobates and ortho-tantalates
Haugsrud, R., & Norby, T. (2006) · Nature Materials · doi:10.1038/nmat1591 · Cited by 541
FABBRI, E., DEPIFANIO, A., DIBARTOLOMEO, E., LICOCCIA, S., & TRAVERSA, E. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.04.002 · Cited by 524
High Total Proton Conductivity in Large-Grained Yttrium-Doped Barium Zirconate
Yamazaki, Y., Hernandez-Sanchez, R., & Haile, S. M. (2009) · Chemistry of Materials · doi:10.1021/cm900208w · Cited by 523
High-Performance Ultrathin Solid Oxide Fuel Cells for Low-Temperature Operation
Huang, H., Nakamura, M., Su, P., Fasching, R. J., Saito, Y., & Prinz, F. B. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2372592 · Cited by 513
Sun, Y., Myung, S., Kim, M., Prakash, J., & Amine, K. (2005) · Journal of the American Chemical Society · doi:10.1021/ja053675g · Cited by 476
Nonstoichiometry of the perovskite-type oxides La1−xSrxCoO3−δ
Mizusaki, J., Mima, Y., Yamauchi, S., Fueki, K., & Tagawa, H. (1989) · Journal of Solid State Chemistry · doi:10.1016/0022-4596(89)90036-4 · Cited by 469
Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells
Shao, Z., Zhou, W., & Zhu, Z. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.08.002 · Cited by 455
Self-citationMaterials and concepts for solid oxide fuel cells (SOFCs) in stationary and mobile applications
Weber, A., & Ivers‐Tiffée, E. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.024 · Cited by 451
Tsvetkov, N., Lu, Q., Sun, L., Crumlin, E. J., & Yildiz, B. (2016) · Nature Materials · doi:10.1038/nmat4659 · Cited by 441
Redox Cycling of Ni‐Based Solid Oxide Fuel Cell Anodes: A Review
Sarantaridis, D., & Atkinson, A. (2007) · Fuel Cells · doi:10.1002/fuce.200600028 · Cited by 416
Nakayama, S., & Sakamoto, M. (1998) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(98)00032-6 · Cited by 410
Ionic conductivity of lanthanoid silicates, Ln10(SiO4)6O3(Ln = La, Nd, Sm, Gd, Dy, Y, Ho, Er and Yb)
Nakayama, S., Kageyama, T., Aono, H., & Sadaoka, Y. (1995) · Journal of Materials Chemistry · doi:10.1039/jm9950501801 · Cited by 398
Kim, J., Sengodan, S., Kwon, G., Ding, D., Shin, J., Liu, M., & Kim, G. (2014) · ChemSusChem · doi:10.1002/cssc.201402351 · Cited by 382
Recent Progress in the Development of Anode Materials for Solid Oxide Fuel Cells
Cowin, P. I., Petit, C. T. G., Lan, R., Irvine, J. T. S., & Tao, S. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100108 · Cited by 379
Sulfur-tolerant anode materials for solid oxide fuel cell application
Gong, M., Liu, X., Trembly, J., & Johnson, C. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.026 · Cited by 378
Choi, S., Yoo, S., Kim, J., Park, S., Jun, A., Sengodan, S., Kim, J., Shin, J., Jeong, H. Y., Choi, Y., et al. (2013) · Scientific Reports · doi:10.1038/srep02426 · Cited by 374
A Novel Composite Cathode for Low‐Temperature SOFCs Based on Oxide Proton Conductors
Yang, L., Zuo, C., Wang, S., Cheng, Z., & Liu, M. (2008) · Advanced Materials · doi:10.1002/adma.200702762 · Cited by 356
Survey of materials selection for ceramic fuel cells II. Cathodes and anodes
Steele, B. C. H. (1996) · Solid State Ionics · doi:10.1016/0167-2738(96)00291-3 · Cited by 353
Colossal resistance switching and band gap modulation in a perovskite nickelate by electron doping
Shi, J., Zhou, Y., & Ramanathan, S. (2014) · Nature Communications · doi:10.1038/ncomms5860 · Cited by 309
Role of solid oxidefuel cells in a balanced energy strategy
Wachsman, E. D., Marlowe, C. A., & Lee, K. T. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02445k · Cited by 307
Nielsen, J., & Hjelm, J. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.10.053 · Cited by 302
Sulfur‐Tolerant Redox‐Reversible Anode Material for Direct Hydrocarbon Solid Oxide Fuel Cells
Yang, C., Yang, Z., Jin, C., Xiao, G., Chen, F., & Han, M. (2012) · Advanced Materials · doi:10.1002/adma.201104852 · Cited by 297
Zhang, C., Grass, M. E., McDaniel, A. H., DeCaluwe, S. C., Gabaly, F. E., Liu, Z., McCarty, K. F., Farrow, R. L., Linne, M. A., Hussain, Z., et al. (2010) · Nature Materials · doi:10.1038/nmat2851 · Cited by 292
Fan, L., Wang, C., Chen, M., & Zhu, B. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.138 · Cited by 276
Nanostructured anodes for solid oxide fuel cells
Gorte, R. J., & Vohs, J. M. (2009) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2009.04.006 · Cited by 246
First-principles study of native point defects in hafnia and zirconia
Zheng, J. X., Ceder, G., Maxisch, T., Chim, W. K., & Choi, W. K. (2007) · Physical Review B · doi:10.1103/physrevb.75.104112 · Cited by 243
A review on the selection of anode materials for solid-oxide fuel cells
Shaikh, S. P. S., Muchtar, A., & Somalu, M. R. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.05.069 · Cited by 242
Yuasa, M., Yamaguchi, A., Itsuki, H., Tanaka, K., Yamamoto, M., & Oyaizu, K. (2005) · Chemistry of Materials · doi:10.1021/cm050958z · Cited by 228
Scalable nanostructured membranes for solid-oxide fuel cells
Tsuchiya, M., Lai, B., & Ramanathan, S. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.43 · Cited by 210
Three-Dimensional Nanostructured Bilayer Solid Oxide Fuel Cell with 1.3 W/cm2 at 450 °C
An, J., Kim, Y., Park, J., Gür, T. M., & Prinz, F. B. (2013) · Nano Letters · doi:10.1021/nl402661p · Cited by 209
Yang, L., Liu, Z., Wang, S., Choi, Y., Zuo, C., & Liu, M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.07.057 · Cited by 205
Yoo, S., Jun, A., Ju, Y., Odkhuu, D., Hyodo, J., Jeong, H. Y., Park, N., Shin, J., Ishihara, T., & Kim, G. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201407006 · Cited by 205
Ceramic membranes for gas processing in coal gasification
Smart, S., Lin, C. X., Ding, L., Thambimuthu, K. V., & da Costa, J. C. D. (2010) · Energy & Environmental Science · doi:10.1039/b924327e · Cited by 194
Controlling Carbon Surface Chemistry by Alloying: Carbon Tolerant Reforming Catalyst
Nikolla, E., Holewinski, A., Schwank, J. W., & Linic, S. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0638298 · Cited by 191
First Principles Analysis of the Stability and Diffusion of Oxygen Vacancies in Metal Oxides
Carrasco, J., Lopez, N., & Illas, F. (2004) · Physical Review Letters · doi:10.1103/physrevlett.93.225502 · Cited by 185
Sun, W., Liu, M., & Liu, W. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201201062 · Cited by 181
Zhang, X., Liu, L., Zhao, Z., Tu, B., Ou, D., Cui, D., Wei, X., Chen, X., & Cheng, M. (2015) · Nano Letters · doi:10.1021/nl5043566 · Cited by 180
Stabilizing Nanostructured Solid Oxide Fuel Cell Cathode with Atomic Layer Deposition
Gong, Y., Palacio, D., Song, X., Patel, R. L., Liang, X., Zhao, X., Goodenough, J. B., & Huang, K. (2013) · Nano Letters · doi:10.1021/nl402138w · Cited by 179
Anisotropic Oxygen Ion Diffusion in Layered PrBaCo2O5+δ
Burriel, M., Peña‐Martínez, J., Chater, R. J., Fearn, S., Berenov, A. V., Skinner, S. J., & Kilner, J. A. (2012) · Chemistry of Materials · doi:10.1021/cm203502s · Cited by 176
A Highly Active Perovskite Electrode for the Oxygen Reduction Reaction Below 600 °C
Zhou, W., Sunarso, J., Zhao, M., Liang, F., Klande, T., & Feldhoff, A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201307305 · Cited by 166
Self-citationWu, H., Parola, V. L., Pantaleo, G., Puleo, F., Venezia, A. M., & Liotta, L. F. (2013) · Catalysts · doi:10.3390/catal3020563 · Cited by 165
Jung, D. W., Duncan, K. L., & Wachsman, E. D. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.08.072 · Cited by 164
Deml, A. M., Stevanović, V., Muhich, C. L., Musgrave, C. B., & O'Hayre, R. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43874k · Cited by 163
Sofie, S. W. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01720.x · Cited by 162
Cimenti, M., & Hill, J. M. (2009) · Energies · doi:10.3390/en20200377 · Cited by 151
Oh, E., Whang, C. M., Lee, Y., Park, S., Prasad, D. H., Yoon, K. J., Son, J., Lee, J., & Lee, H. (2012) · Advanced Materials · doi:10.1002/adma.201200505 · Cited by 150
A higher conductivity Bi2O3-based electrolyte
Jiang, N. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00291-6 · Cited by 148
JIANG, S., Chen, X., CHAN, S., Kwok, J. T., & Khor, K. A. (2005) · Solid State Ionics · doi:10.1016/j.ssi.2005.09.010 · Cited by 146
Kobsiriphat, W., Madsen, B. D., Wang, Y., Shah, M. N., Marks, L. D., & Barnett, S. A. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3269993 · Cited by 146
Yan, J., Matsumoto, H., Enoki, M., & Ishihara, T. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1943568 · Cited by 146
Oxygen Reduction on LaMnO3-Based Cathode Materials in Solid Oxide Fuel Cells
Choi, Y., Mebane, D. S., Lin, M. C., & Liu, M. (2007) · Chemistry of Materials · doi:10.1021/cm062616e · Cited by 145
Increased solid-oxide fuel cell power density using interfacial ceria layers
Tsai, T., & Barnett, S. A. (1997) · Solid State Ionics · doi:10.1016/s0167-2738(97)00113-6 · Cited by 145
Semiconductor thermochemistry in density functional calculations
Lany, S. (2008) · Physical Review B · doi:10.1103/physrevb.78.245207 · Cited by 143
Arrivé, C., Delahaye, T., Joubert, O., & Gauthier, G. H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.062 · Cited by 140
Interneuron subtypes and orientation tuning
Lee, S., Kwan, A. C., & Dan, Y. (2014) · Nature · doi:10.1038/nature13128 · Cited by 137
Zhou, W., Sunarso, J., Chen, Z., Ge, L., Motuzas, J., Zou, J., Wang, G., Julbe, A., & Zhu, Z. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00451k · Cited by 124
Self-citationPatakangas, J., Ma, Y., Jing, Y., & Lund, P. D. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.008 · Cited by 122
Bi, L., Zhang, S., Fang, S., Tao, Z., Peng, R., & Liu, W. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.08.024 · Cited by 120
Dong, F., Chen, Y., Chen, D., & Shao, Z. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502240m · Cited by 119
Self-citationHayd, J., Dieterle, L., Guntow, U., Gerthsen, D., & Ivers‐Tiffée, E. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.147 · Cited by 114
Synthesis and Stability of Pd@CeO2 Core–Shell Catalyst Films in Solid Oxide Fuel Cell Anodes
Adijanto, L., Sampath, A., Yu, A. S., et al. (2013) · ACS Catalysis · doi:10.1021/cs4004112 · Cited by 114
Choi, Y., Lin, M. C., & Liu, M. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200700411 · Cited by 113
Anisotropic oxygen diffusion in PrBaCo2O5.5 double perovskites
Seymour, I. D., Tarancón, A., Chroneos, A., Parfitt, D., Kilner, J. A., & Grimes, R. W. (2011) · Solid State Ionics · doi:10.1016/j.ssi.2011.09.002 · Cited by 111
Study of A-site ordered PrBaMn 2 O 6−δ manganite properties depending on the treatment conditions
Trukhanov, S. V., Lobanovski, L. S., Bushinsky, M. V., Fedotova, V. V., Troyanchuk, I. O., Trukhanov, A. V., Ryzhov, V. A., Szymczak, H., Szymczak, R., & Baran, M. (2005) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/17/41/019 · Cited by 110
Peters, C., Weber, A., & Ivers‐Tiffée, E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2909552 · Cited by 109
Zhu, Y., Chen, Z., Zhou, W., Jiang, S., Zou, J., & Shao, Z. (2013) · ChemSusChem · doi:10.1002/cssc.201300694 · Cited by 105
Self-citationThe evolution of low temperature solid oxide fuel cells
Lee, K. T., Yoon, H. S., & Wachsman, E. D. (2012) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2012.194 · Cited by 92
Zhou, W., Jin, W., Zhu, Z., & Shao, Z. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.11.092 · Cited by 89
Self-citationAmorphous Iron Oxide Decorated 3D Heterostructured Electrode for Highly Efficient Oxygen Reduction
Zhou, W., Ge, L., Chen, Z., Liang, F., Xu, H., Motuzas, J., Julbe, A., & Zhu, Z. (2011) · Chemistry of Materials · doi:10.1021/cm201439d · Cited by 84
Self-citationCo-free, iron perovskites as cathode materials for intermediate-temperature solid oxide fuel cells
Hou, S., Alonso, J. A., & Goodenough, J. B. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.07.017 · Cited by 82
Regenerative Performance of the NASA Symmetrical Solid Oxide Fuel Cell Design
Cable, T. L., Setlock, J. A., Farmer, S. C., et al. (2010) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2009.02477.x · Cited by 81
Surface‐Modified Low‐Temperature Solid Oxide Fuel Cell
Kim, Y., Holme, T. P., Gür, T. M., & Prinz, F. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101058 · Cited by 79
Noh, H., Son, J., Lee, H., et al. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.07.035 · Cited by 73
Periodic models in quantum chemical simulations of F centers in crystalline metal oxides
Zhukovskii, Y. F., Kotomin, E. A., Évarestov, R. A., & Ellis, D. E. (2007) · International Journal of Quantum Chemistry · doi:10.1002/qua.21483 · Cited by 73
Zhang, S.-L., Liu, T., Li, C., Li, C., Yao, S., Li, C.-X., Li, C.-X., Yang, G., & Liu, M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01203a · Cited by 70
Designing Fe-Based Oxygen Catalysts by Density Functional Theory Calculations
Chen, C., & Francesco Ciucci, A. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02953 · Cited by 70
Hammami, R., Batis, H., & Minot, C. (2009) · Surface Science · doi:10.1016/j.susc.2009.08.016 · Cited by 66
Atomic Layer Deposition of Lead Sulfide Thin Films for Quantum Confinement
Dasgupta, N. P., Lee, W., & Prinz, F. B. (2009) · Chemistry of Materials · doi:10.1021/cm901228x · Cited by 64
Effects of H 2 O and CO 2 on Electrochemical Behaviors of BSCF Cathode for Proton Conducting IT-SOFC
Sun, S., & Cheng, Z. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0611702jes · Cited by 63
Thin film YSZ coatings on functionally graded freeze cast NiO/YSZ SOFC anode supports
Gannon, P. E., Sofie, S. W., Deibert, M. C., Smith, R. J., & Gorokhovsky, V. I. (2008) · Journal of Applied Electrochemistry · doi:10.1007/s10800-008-9682-4 · Cited by 61
Highly Active and Thermally Stable Core-Shell Catalysts for Solid Oxide Fuel Cells
Kim, J., Wieder, N. L., Abraham, A. J., Cargnello, M., Fornasiero, P., Gorte, R. J., & Vohs, J. M. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3571039 · Cited by 58
Jung, D. W., Lee, K. T., & Wachsman, E. D. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0951605jes · Cited by 56
Studying the CO–CO2 characteristics of SOFC anodes by means of patterned Ni anodes
Utz, A., Leonide, A., Weber, A., & Ivers‐Tiffée, E. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.10.056 · Cited by 55
Hou, S.-E., Alonso, J. A., Rajasekhara, S., Martínez-Lope, M. J., Fernández-Díaz, M. T., & Goodenough, J. B. (2009) · Chemistry of Materials · doi:10.1021/cm9020518 · Cited by 51
Ishihara, T., Eto, H., & Yan, J. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.12.174 · Cited by 50
Improving solid oxide fuel cells with yttria-doped ceria interlayers by atomic layer deposition
Fan, Z., Chao, C., Hossein-Babaei, F., et al. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11550b · Cited by 50
Yamamoto, K., Hashishin, T., Matsuda, M., Qiu, N. Y., Tan, Z., & Ohara, S. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.03.007 · Cited by 46
Maruyama, J., & Abe, I. (2007) · Chemical Communications · doi:10.1039/b703723f · Cited by 44
Trends in scale and shape of survival curves
Weon, B. M., & Je, J. H. (2012) · Scientific Reports · doi:10.1038/srep00504 · Cited by 36
A Highly Stable and Active Hybrid Cathode for Low‐Temperature Solid Oxide Fuel Cells
Liang, F., Zhou, W., & Zhu, Z. (2014) · ChemElectroChem · doi:10.1002/celc.201402143 · Cited by 34
Self-citationTan, W., Qin, Z., Han, Y., Zhu, X., & Hongyi, L. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.02.008 · Cited by 22
Iwadate, Y., Shirao, K., & Fukushima, K. (1999) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(98)00715-4 · Cited by 8
Cited by
Metal oxide-based materials as an emerging family of hydrogen evolution electrocatalysts
Zhu, Y., Lin, Q., Zhong, Y., Tahini, H. A., Shao, Z., & Wang, H. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02485f · Cited by 709
Self-citationThermal-expansion offset for high-performance fuel cell cathodes
Zhang, Y., Chen, B., Guan, D., Xu, M., Ran, R., Ni, M., Zhou, W., O’Hayre, R., & Shao, Z. (2021) · Nature · doi:10.1038/s41586-021-03264-1 · Cited by 691
Self-citationFan, L., Zhu, B., Su, P.-C., & He, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.044 · Cited by 501
Xu, X., Wang, W., Zhou, W., & Shao, Z. (2018) · Small Methods · doi:10.1002/smtd.201800071 · Cited by 407
Self-citationMetal–Organic Frameworks as a Versatile Platform for Proton Conductors
Ye, Y., Gong, L., Xiang, S., Zhang, Z., & Chen, B. (2020) · Advanced Materials · doi:10.1002/adma.201907090 · Cited by 392
Metadata
- Authors
- Zhang, Y., Knibbe, R., Sunarso, J., Zhong, Y., Zhou, W., Shao, Z., & Zhu, Z.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-06-19
- Volume
- 29
- Issue
- 48
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2626072696
- Cited by
- 390
- References
- 130
- FWCI
- 15.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.