The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Structurally and Functionally Optimized Silk‐Fibroin–Gelatin Scaffold Using 3D Printing to Repair Cartilage Injury In Vitro and In Vivo
Abstract
Articular cartilage repair remains a great challenge for clinicians and researchers. Recently, there emerges a promising way to achieve one‐step cartilage repair in situ by combining endogenic bone marrow stem cells (BMSCs) with suitable biomaterials using a tissue engineering technique. To meet the increasing demand for cartilage tissue engineering, a structurally and functionally optimized scaffold is designed, by integrating silk fibroin with gelatin in combination with BMSC‐specific‐affinity peptide using 3D printing (3DP) technology. The combination ratio of silk fibroin and gelatin greatly balances the mechanical properties and degradation rate to match the newly formed cartilage. This dually optimized scaffold has shown superior performance for cartilage repair in a knee joint because it not only retains adequate BMSCs, due to efficient recruiting ability, and acts as a physical barrier for blood clots, but also provides a mechanical protection before neocartilage formation and a suitable 3D microenvironment for BMSC proliferation, differentiation, and extracellular matrix production. It appears to be a promising biomaterial for knee cartilage repair and is worthy of further investigation in large animal studies and preclinical applications. Beyond knee cartilage, this dually optimized scaffold may also serve as an ideal biomaterial for the regeneration of other joint cartilages.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hunziker, E. B. (2002) · Osteoarthritis and Cartilage · doi:10.1053/joca.2002.0801 · Cited by 1,975
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Mesenchymal cell-based repair of large, full-thickness defects of articular cartilage.
Wakitani, S., Goto, T., Pineda, S. J., Young, R. G., Mansour, J. M., Caplan, A. I., & Goldberg, V. M. (1994) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-199404000-00013 · Cited by 1,605
Mesenchymal Stem Cell Homing: The Devil Is in the Details
Karp, J. M., & Leng Teo, G. S. (2009) · Cell Stem Cell · doi:10.1016/j.stem.2009.02.001 · Cited by 1,445
Structures, mechanical properties and applications of silk fibroin materials
Koh, L.-D., Cheng, Y., Teng, C.-P., Khin, Y.-W., Loh, X.-J., Tee, S.-Y., Low, M., Ye, E., Yu, H.-D., Zhang, Y.-W., et al. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.02.001 · Cited by 1,241
Unlike Bone, Cartilage Regeneration Remains Elusive
Huey, D. J., Hu, J. C., & Athanasiou, K. A. (2012) · Science · doi:10.1126/science.1222454 · Cited by 1,182
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Lien, S.-M., Ko, L.-Y., & Huang, T.-J. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.09.020 · Cited by 655
Lee, C. H., Cook, J. L., Mendelson, A., Moioli, E. K., Yao, H., & Mao, J. J. (2010) · The Lancet · doi:10.1016/s0140-6736(10)60668-x · Cited by 613
Silk proteins for biomedical applications: Bioengineering perspectives
Kundu, B., Kurland, N. E., Bano, S., Patra, C., Engel, F. B., Yadavalli, V. K., & Kundu, S. C. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.09.002 · Cited by 451
Wang, Y., Kim, U.-J., Blasioli, D. J., Kim, H.-J., & Kaplan, D. L. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.022 · Cited by 436
Mesenchymal stem cells in joint disease and repair
Barry, F., & Murphy, M. (2013) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2013.109 · Cited by 423
Cell-based tissue engineering strategies used in the clinical repair of articular cartilage
Huang, B. J., Hu, J. C., & Athanasiou, K. A. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.04.018 · Cited by 393
Gooding, C. R., Bartlett, W., Bentley, G., Skinner, J. A., Carrington, R., & Flanagan, A. (2006) · The Knee · doi:10.1016/j.knee.2006.02.011 · Cited by 366
A Tissue Engineering Solution for Segmental Defect Regeneration in Load-Bearing Long Bones
Reichert, J. C., Cipitria, A., Epari, D. R., Saifzadeh, S., Krishnakanth, P., Berner, A., Woodruff, M. A., Schell, H., Mehta, M., Schuetz, M. A., et al. (2012) · Science Translational Medicine · doi:10.1126/scitranslmed.3003720 · Cited by 364
Directed differentiation of human embryonic stem cells toward chondrocytes
Oldershaw, R. A., Baxter, M. A., Lowe, E. T., Bates, N., Grady, L. M., Soncin, F., Brison, D. R., Hardingham, T. E., & Kimber, S. J. (2010) · Nature Biotechnology · doi:10.1038/nbt.1683 · Cited by 302
Silk fibroin biomaterials for controlled release drug delivery
Pritchard, E. M., & Kaplan, D. L. (2011) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2011.568936 · Cited by 286
Novel Genipin-Cross-Linked Chitosan/Silk Fibroin Sponges for Cartilage Engineering Strategies
Silva, S. S., Motta, A., Rodrigues, M. T., Pinheiro, A. F. M., Gomes, M. E., Mano, J. F., Reis, R. L., & Migliaresi, C. (2008) · Biomacromolecules · doi:10.1021/bm800874q · Cited by 267
Rodriguez, M. J., Brown, J., Giordano, J., Lin, S. J., Omenetto, F. G., & Kaplan, D. L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.046 · Cited by 220
A Difunctional Regeneration Scaffold for Knee Repair based on Aptamer‐Directed Cell Recruitment
Hu, X., Wang, Y., Tan, Y., Wang, J., Liu, H., Wang, Y., Yang, S., Shi, M., Zhao, S., Zhang, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605235 · Cited by 187
Self-citationA functional biphasic biomaterial homing mesenchymal stem cells for in vivo cartilage regeneration
Huang, H., Zhang, X., Hu, X., Shao, Z., Zhu, J., Dai, L., Man, Z., Yuan, L., Chen, H., Zhou, C., et al. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.08.020 · Cited by 135
Self-citationMan, Z., Yin, L., Shao, Z., Zhang, X., Hu, X., Zhu, J., Dai, L., Huang, H., Yuan, L., Zhou, C., et al. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.03.031 · Cited by 127
Self-citationLuo, Z., Jiang, L., Xu, Y., Li, H., Xu, W., Wu, S., Wang, Y., Tang, Z., Lv, Y., & Yang, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.01.001 · Cited by 123
Meng, Q., Man, Z., Dai, L., Huang, H., Zhang, X., Hu, X., Shao, Z., Zhu, J., Zhang, J., Fu, X., et al. (2015) · Scientific Reports · doi:10.1038/srep17802 · Cited by 122
Self-citationTissue Regeneration: A Silk Road
Jao, D., Mou, X., & Hu, X. (2016) · Journal of Functional Biomaterials · doi:10.3390/jfb7030022 · Cited by 116
Self-citationLee, K. B., Wang, V. T., Chan, Y. H., & Hui, J. H. P. (2012) · Annals of the Academy of Medicine Singapore · doi:10.47102/annals-acadmedsg.v41n11p511 · Cited by 97
Syndecans in cartilage breakdown and synovial inflammation
Pap, T., & Bertrand, J. (2013) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2012.178 · Cited by 86
Gil, E. S., Spontak, R. J., & Hudson, S. M. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500076 · Cited by 77
Genipin‐Modified Silk‐Fibroin Nanometric Nets
Silva, S. S., Maniglio, D., Motta, A., et al. (2008) · Macromolecular Bioscience · doi:10.1002/mabi.200700300 · Cited by 75
Yao, Q., Wei, B., Liu, N., Li, C., Guo, Y., Shamie, A. N., Chen, J., Tang, C., Jin, C., Xu, Y., et al. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0280 · Cited by 59
Self-citationHuang, H., Zhang, X., Hu, X., Dai, L., Zhu, J., Man, Z., Chen, H., Zhou, C., & Ao, Y. (2014) · Biomedical Materials · doi:10.1088/1748-6041/9/3/035008 · Cited by 59
Self-citationUltrasonication and Genipin Cross-Linking to Prepare Novel Silk Fibroin–Gelatin Composite Hydrogel
Xiao, W., Liu, W., Sun, J., Dan, X., Wei, D., & Fan, H. (2012) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911512448692 · Cited by 59
Sun, K., Li, R., Jiang, W., Sun, Y., & Li, H. (2016) · Biochemical and Biophysical Research Communications · doi:10.1016/j.bbrc.2016.07.050 · Cited by 47
Li, T. Z., Jin, C. Z., Choi, B. H., Kim, M. S., Kim, Y. J., Park, S. R., Yoon, J. H., & Min, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102695 · Cited by 38
Cited by
Biomaterials for bone tissue engineering scaffolds: a review
Qu, H., Fu, H., Han, Z., & Sun, Y. (2019) · RSC Advances · doi:10.1039/c9ra05214c · Cited by 827
Biofabrication strategies for 3D in vitro models and regenerative medicine
Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0006-y · Cited by 753
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Silk fibroin as a functional biomaterial for tissue engineering
Sun, W., Gregory, D. A., Tomeh, M. A., & Zhao, X. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22031499 · Cited by 552
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Metadata
- Authors
- Shi, W., Sun, M., Hu, X., Ren, B., Cheng, J., Li, C., Duan, X., Fu, X., Zhang, J., Chen, H., & Ao, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-06-06
- Volume
- 29
- Issue
- 29
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2622003939
- Cited by
- 484
- References
- 34
- FWCI
- 12.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.