The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Metallic MXene Saturable Absorber for Femtosecond Mode‐Locked Lasers
Abstract
2D transition metal carbides, nitrides, and carbonitides called MXenes have attracted much attention due to their outstanding properties. However, MXene's potential in laser technology is not explored. It is demonstrated here that Ti 3 CN, one of MXene compounds, can serve as an excellent mode‐locker that can produce femtosecond laser pulses from fiber cavities. Stable laser pulses with a duration as short as 660 fs are readily obtained at a repetition rate of 15.4 MHz and a wavelength of 1557 nm. Density functional theory calculations show that Ti 3 CN is metallic, in contrast to other 2D saturable absorber materials reported so far to be operative for mode‐locking. 2D structural and electronic characteristics are well conserved in their stacked form, possibly due to the unique interlayer coupling formed by MXene surface termination groups. Noticeably, the calculations suggest a promise of MXenes in broadband saturable absorber applications due to metallic characteristics, which agrees well with the experiments of passively Q‐switched lasers using Ti 3 CN at wavelengths of 1558 and 1875 nm. This study provides a valuable strategy and intuition for the development of nanomaterial‐based saturable absorbers opening new avenues toward advanced photonic devices based on MXenes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Self-citation2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Self-citation25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Self-citationElectromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Self-citationTwo-Dimensional Transition Metal Carbides
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2012) · ACS Nano · doi:10.1021/nn204153h · Cited by 4,769
Self-citationGeneration of Optical Harmonics
Franken, P. A., Hill, A. E., Peters, C. W., & Weinreich, G. (1961) · Physical Review Letters · doi:10.1103/physrevlett.7.118 · Cited by 3,335
Femtosecond laser micromachining in transparent materials
Gattass, R. R., & Mazur, E. (2008) · Nature Photonics · doi:10.1038/nphoton.2008.47 · Cited by 3,247
Recent developments in compact ultrafast lasers
Keller, U. (2003) · Nature · doi:10.1038/nature01938 · Cited by 2,291
Flexible and conductive MXene films and nanocomposites with high capacitance
Ling, Z., Ren, C. E., Zhao, M.-Q., Yang, J., Giammarco, J. M., Qiu, J., Barsoum, M. W., & Gogotsi, Y. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414215111 · Cited by 2,274
Self-citationMXene Ti3C2: An Effective 2D Light-to-Heat Conversion Material
Li, R., Zhang, L., Shi, L., & Wang, P. (2017) · ACS Nano · doi:10.1021/acsnano.6b08415 · Cited by 1,798
Unique Lead Adsorption Behavior of Activated Hydroxyl Group in Two-Dimensional Titanium Carbide
Peng, Q., Guo, J., Zhang, Q., Xiang, J., Liu, B., Zhou, A., Liu, R., & Tian, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500506k · Cited by 1,322
Chen, Y., Jiang, G., Chen, S., Guo, Z., Yu, X., Zhao, C., Zhang, H., Bao, Q., Wen, S., Tang, D., et al. (2015) · Optics Express · doi:10.1364/oe.23.012823 · Cited by 1,029
Photoluminescent Ti3C2 MXene Quantum Dots for Multicolor Cellular Imaging
Xue, Q., Zhang, H., Zhu, M., Pei, Z., Li, H., Wang, Z., Huang, Y., Huang, Y., Deng, Q., Zhou, J., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604847 · Cited by 980
NMR reveals the surface functionalisation of Ti3C2MXene
Hope, M. A., Forse, A. C., Griffith, K. J., Lukatskaya, M. R., Ghidiu, M., Gogotsi, Y., & Grey, C. P. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00330c · Cited by 974
Self-citationLarge-scale delamination of multi-layers transition metal carbides and carbonitrides “MXenes”
Naguib, M., Unocic, R. R., Armstrong, B. L., & Nanda, J. (2015) · Dalton Transactions · doi:10.1039/c5dt01247c · Cited by 964
Amine‐Assisted Delamination of Nb2C MXene for Li‐Ion Energy Storage Devices
Mashtalir, O., Lukatskaya, M. R., Zhao, M., Barsoum, M. W., & Gogotsi, Y. (2015) · Advanced Materials · doi:10.1002/adma.201500604 · Cited by 954
Self-citationMolecular fingerprinting with the resolved modes of a femtosecond laser frequency comb
Diddams, S. A., Hollberg, L., & Mbele, V. (2007) · Nature · doi:10.1038/nature05524 · Cited by 805
Zhu, M., Huang, Y., Deng, Q., Zhou, J., Pei, Z., Xue, Q., Huang, Y., Wang, Z., Li, H., Huang, Q., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600969 · Cited by 731
Xuan, J., Wang, Z., Chen, Y., Liang, D., Cheng, L., Yang, X., Liu, Z., Ma, R., Sasaki, T., & Geng, F. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201606643 · Cited by 595
Wang, H.-W., Naguib, M., Page, K., Wesolowski, D. J., & Gogotsi, Y. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04250 · Cited by 495
Self-citationLiu, H., Duan, C., Yang, C., Shen, W., Wang, F., & Zhu, Z. (2015) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2015.04.090 · Cited by 475
Du, J., Wang, Q., Jiang, G., Xu, C., Zhao, C., Xiang, Y., Chen, Y., Wen, S., & Zhang, H. (2014) · Scientific Reports · doi:10.1038/srep06346 · Cited by 465
WS2 mode-locked ultrafast fiber laser
Mao, D., Wang, Y., Ma, C., Han, L., Jiang, B., Gan, X., Hua, S., Zhang, W., Mei, T., & Zhao, J. (2015) · Scientific Reports · doi:10.1038/srep07965 · Cited by 448
Bass, M., Franken, P. A., Ward, J. F., & Weinreich, G. (1962) · Physical Review Letters · doi:10.1103/physrevlett.9.446 · Cited by 425
Wu, K., Zhang, X., Wang, J., Li, X., & Chen, J. (2015) · Optics Express · doi:10.1364/oe.23.011453 · Cited by 387
Femtosecond pulse erbium-doped fiber laser by a few-layer MoS_2 saturable absorber
Liu, H., Luo, A.-P., Wang, F.-Z., Tang, R., Liu, M., Luo, Z.-C., Xu, W.-C., Zhao, C.-J., & Zhang, H. (2014) · Optics Letters · doi:10.1364/ol.39.004591 · Cited by 383
Xie, X., Xue, Y., Li, L., Chen, S., Nie, Y., Ding, W., & Wei, Z. (2014) · Nanoscale · doi:10.1039/c4nr02080d · Cited by 330
Wave-Equation Description of Nonlinear Optical Interactions
Boyd, R. W. (2008) · Nonlinear Optics · doi:10.1016/b978-0-12-369470-6.00002-2 · Cited by 304
Zhang, M., Howe, R. C. T., Woodward, R. I., Kelleher, E. J. R., Torrisi, F., Hu, G., Popov, S. V., Taylor, J. R., & Hasan, T. (2015) · Nano Research · doi:10.1007/s12274-014-0637-2 · Cited by 292
Black Phosphorus–Polymer Composites for Pulsed Lasers
Mu, H., Lin, S., Wang, Z., Xiao, S., Li, P., Chen, Y., Zhang, H., Bao, H., Lau, S. P., Pan, C., et al. (2015) · Advanced Optical Materials · doi:10.1002/adom.201500336 · Cited by 260
Nonlinear Saturable Absorption of Liquid‐Exfoliated Molybdenum/Tungsten Ditelluride Nanosheets
Mao, D., Du, B., Yang, D., Zhang, S., Wang, Y., Zhang, W., She, X., Cheng, H., Zeng, H., & Zhao, J. (2016) · Small · doi:10.1002/smll.201503348 · Cited by 237
Koo, J., Jhon, Y. I., Park, J., Lee, J., Jhon, Y. M., & Lee, J. H. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602664 · Cited by 202
Self-citationChen, X., Kong, Z., Li, N., Zhao, X., & Sun, C. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp06018h · Cited by 147
Femtosecond Lasers for Quantum Information Technology
de Vivie‐Riedle, R., & Troppmann, U. (2007) · Chemical Reviews · doi:10.1021/cr040094l · Cited by 101
Mode-locked Er-doped fiber laser based on liquid phase exfoliated Sb2Te3topological insulator
Bogusławski, J., Sotor, J. Z., Soboń, G., Tarka, J., Jagiełło, J., Macherzyński, W., Lipińska, L., & Abramski, K. M. (2014) · Laser Physics · doi:10.1088/1054-660x/24/10/105111 · Cited by 73
Cited by
The world of two-dimensional carbides and nitrides (MXenes)
VahidMohammadi, A., Rosen, J., & Gogotsi, Y. (2021) · Science · doi:10.1126/science.abf1581 · Cited by 3,191
Self-citationMXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
Self-citationControl of MXenes’ electronic properties through termination and intercalation
Hart, J. L., Hantanasirisakul, K., Lang, A. C., Anasori, B., Pinto, D., Pivak, Y., van Omme, J. T., May, S. J., Gogotsi, Y., & Taheri, M. L. (2019) · Nature Communications · doi:10.1038/s41467-018-08169-8 · Cited by 1,342
Self-citationElectronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)
Hantanasirisakul, K., & Gogotsi, Y. (2018) · Advanced Materials · doi:10.1002/adma.201804779 · Cited by 1,325
Self-citationJiang, X., Kuklin, A. V., Baev, A., Ge, Y., Ågren, H., Zhang, H., & Prasad, P. N. (2020) · Physics Reports · doi:10.1016/j.physrep.2019.12.006 · Cited by 914
Metadata
- Authors
- Jhon, Y. I., Koo, J., Anasori, B., Seo, M., Lee, J. H., Gogotsi, Y., & Jhon, Y. M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-07-17
- Volume
- 29
- Issue
- 40
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2735958071
- Cited by
- 617
- References
- 36
- FWCI
- 27.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.