The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Desktop‐Stereolithography 3D‐Printing of a Poly(dimethylsiloxane)‐Based Material with Sylgard‐184 Properties
Open accessAbstract
The advantageous physiochemical properties of poly(dimethylsiloxane) (PDMS) have made it an extremely useful material for prototyping in various technological, scientific, and clinical areas. However, PDMS molding is a manual procedure and requires tedious assembly steps, especially for 3D designs, thereby limiting its access and usability. On the other hand, automated digital manufacturing processes such as stereolithography (SL) enable true 3D design and fabrication. Here the formulation, characterization, and SL application of a 3D‐printable PDMS resin (3DP‐PDMS) based on commercially available PDMS‐methacrylate macromers, a high‐efficiency photoinitiator and a high‐absorbance photosensitizer, is reported. Using a desktop SL‐printer, optically transparent submillimeter structures and microfluidic channels are demonstrated. An optimized blend of PDMS‐methacrylate macromers is also used to SL‐print structures with mechanical properties similar to conventional thermally cured PDMS (Sylgard‐184). Furthermore, it is shown that SL‐printed 3DP‐PDMS substrates can be rendered suitable for mammalian cell culture. The 3DP‐PDMS resin enables assembly‐free, automated, digital manufacturing of PDMS, which should facilitate the prototyping of devices for microfluidics, organ‐on‐chip platforms, soft robotics, flexible electronics, and sensors, among others.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xia, Y., & Whitesides, G. M. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.153 · Cited by 4,611
Solvent Compatibility of Poly(dimethylsiloxane)-Based Microfluidic Devices
Lee, J. N., Park, C., & Whitesides, G. M. (2003) · Analytical Chemistry · doi:10.1021/ac0346712 · Cited by 2,643
Microfluidic Large-Scale Integration
Thorsen, T., Maerkl, S. J., & Quake, S. R. (2002) · Science · doi:10.1126/science.1076996 · Cited by 2,222
Cells lying on a bed of microneedles: An approach to isolate mechanical force
Tan, J. L., Tien, J., Pirone, D. M., Gray, D. S., Bhadriraju, K., & Chen, C. S. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0235407100 · Cited by 1,962
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering
Johnston, I. D., McCluskey, D. K., Tan, C. K. L., & Tracey, M. C. (2014) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/24/3/035017 · Cited by 1,495
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
Self-citationProjection micro-stereolithography using digital micro-mirror dynamic mask
Sun, C., Fang, N., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 880
Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing
Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 673
The Chemistry of Radical Polymerization
(2005) · Elsevier eBooks · doi:10.1016/b978-0-08-044288-4.x5015-8 · Cited by 617
Configurable 3D-Printed millifluidic and microfluidic ‘lab on a chip’ reactionware devices
Kitson, P. J., Rosnes, M. H., Sans, V., Dragone, V., & Cronin, L. (2012) · Lab on a Chip · doi:10.1039/c2lc40761b · Cited by 484
Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels
Gong, H., Bickham, B. P., Woolley, A. T., & Nordin, G. P. (2017) · Lab on a Chip · doi:10.1039/c7lc00644f · Cited by 443
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T.-W., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 432
Optical approach to resin formulation for 3D printed microfluidics
Gong, H., Beauchamp, M., Perry, S., Woolley, A. T., & Nordin, G. P. (2015) · RSC Advances · doi:10.1039/c5ra23855b · Cited by 315
Choi, K. M., & Rogers, J. A. (2003) · Journal of the American Chemical Society · doi:10.1021/ja029973k · Cited by 309
3D-printing of transparent bio-microfluidic devices in PEG-DA
Urrios, A., Parra-Cabrera, C., Bhattacharjee, N., Gonzalez-Suarez, A. M., Rigat-Brugarolas, L. G., Nallapatti, U., Samitier, J., DeForest, C. A., Posas, F., Garcia-Cordero, J. L., et al. (2016) · Lab on a Chip · doi:10.1039/c6lc00153j · Cited by 274
Self-citationIndustrial Photoinitiators: A Technical Guide
Green, W. A. (2010) · CRC Press eBooks · doi:10.1201/9781439827468 · Cited by 243
Photopatternable Conductive PDMS Materials for Microfabrication
Cong, H., & Pan, T. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701437 · Cited by 191
3D Printing by Multiphase Silicone/Water Capillary Inks
Roh, S., Parekh, D. P., Bharti, B., Stoyanov, S. D., & Velev, O. D. (2017) · Advanced Materials · doi:10.1002/adma.201701554 · Cited by 187
Modular Elastomer Photoresins for Digital Light Processing Additive Manufacturing
Thrasher, C. J., Schwartz, J. J., & Boydston, A. J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13909 · Cited by 138
Cooksey, G. A., Sip, C. G., & Folch, A. (2008) · Lab on a Chip · doi:10.1039/b806803h · Cited by 131
Self-citationTwo-Photon Three-Dimensional Microfabrication of Poly(Dimethylsiloxane) Elastomers
Coenjarts, C. A., & Ober, C. K. (2004) · Chemistry of Materials · doi:10.1021/cm048717z · Cited by 103
Three-dimensional laser micro-sculpturing of silicone: towards bio-compatible scaffolds
Rekštytė, S., Malinauskas, M., & Juodkazis, S. (2013) · Optics Express · doi:10.1364/oe.21.017028 · Cited by 70
Diffusion-limited photopolymerization in scanning micro-stereolithography
Fang, N. X., Sun, C., & Zhang, X. (2004) · Applied Physics A · doi:10.1007/s00339-004-2938-x · Cited by 69
Design and dynamic characterization of “single-stroke” peristaltic PDMS micropumps
Lai, H., & Folch, A. (2010) · Lab on a Chip · doi:10.1039/c0lc00023j · Cited by 57
Self-citationSinkala, E., & Eddington, D. (2010) · Lab on a Chip · doi:10.1039/c0lc00244e · Cited by 27
Cited by
Stretchable Electronics Based on PDMS Substrates
Qi, D., Zhang, K., Tian, G., Jiang, B., & Huang, Y. (2021) · Advanced Materials · doi:10.1002/adma.202003155 · Cited by 663
Chen, P., Zheng, L., Wang, Y., Tao, M., Xie, Z., Xia, C., Gu, C., Chen, J., Qiu, P., Mei, S., et al. (2019) · Theranostics · doi:10.7150/thno.31017 · Cited by 462
Microfluidics: Innovations in Materials and Their Fabrication and Functionalization
Nielsen, J. B., Hanson, R. L., Almughamsi, H. M., Pang, C., Fish, T. R., & Woolley, A. T. (2020) · Analytical Chemistry · doi:10.1021/acs.analchem.9b04986 · Cited by 359
Nielsen, A. V., Beauchamp, M. J., Nordin, G. P., & Woolley, A. T. (2020) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-091619-102649 · Cited by 339
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Herzberger, J., Sirrine, J. M., Williams, C. B., & Long, T. E. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101144 · Cited by 329
Metadata
- Authors
- Bhattacharjee, N., Parra‐Cabrera, C., Kim, Y. T., Kuo, A. P., & Folch, A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-04-14
- Volume
- 30
- Issue
- 22
- Pages
- e1800001-e1800001
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2800919684
- Cited by
- 322
- References
- 28
- FWCI
- 17.21
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.